Photoshop :: CS5 Extended - Saving JPEGs
Jul 19, 2013
I'm trying to save 8bit tiff files (2400x1374pixel 300dpi) with no layers, paths etc as a jpeg in CS5 but even with the jpeg quality slider set to 0 it is still giving me a file size over 400kb.
Â
The tiff files were coverted to 72dpi @ 900pixel wide. I can't figure out why it is still giving me a jpeg over 400kb in filesize. It should be well under 100kb. I normally like to set the jpeg slider around 8 to
Â
still have a sharp image but even at 0 it's still giving me a large file.
Â
Mac OS 10.6.8, 12GB ram, iMac 2.93Ghz quad-core i7    CS5 ext. v12.0.4 x64
View 2 Replies
ADVERTISEMENT
Jan 10, 2006
Whenever I open a jpeg from my dig camera and I work on it on PS CS2, at saving time, it always goes right to Save AS. I just simply want to overwrite the previous picture without going into the quality dialog box. I want to keep the original size, but just want to save the changes.
How can I disable that in CS2 (if possible)?
View 3 Replies
View Related
Sep 4, 2006
I have been saving bulk images from Bridge using Batch process. What I would like to do is when the image is automatically saved as a JPEG. I want them to be saved as a (6) medium. However, they all seem to be saved as a (12) large. I then open each one and re-save.
Is there a automated process?
View 2 Replies
View Related
Jan 4, 2012
I have assembled a wholel lot of scanned pages from my sketch pad into one psd file. That file has guides which I use to register and align every page (each page is therefore its own layer). Is there a way I can make an action and save off each individual layer as its own jpeg? I set up an action but I don't know how to get photoshop to save it with a distinct namespace. The first action I set up basically prompted me to re-name each layer as I saved it, which isn't really saving time. What I want is for the action to start at the bottom layer and turn off the visiblity of all the layers above it, save the visible layer as a jpeg with a name based on the layer and then turn on the next layer's visibitlity and repeat, until all layers have been saved.
View 4 Replies
View Related
Sep 15, 2012
When I save my .PSD files as .JPEGS the colour of the images change drastically.
View 1 Replies
View Related
Mar 3, 2014
I recently had to have a new hard drive and motherboard installed on my PC, which is running Win 7. I didn't have any problems at all with Elements prior to this.
Â
I haven't opened PSE 12 for a few days.
Â
My normal workflow is:
Â
Open RAW file, edit, then separately save PSD and JPG in Irfanview (maybe an odd choice but it's familiar and easy to use).
Â
Just recently I've noticed a problem in Irfanview when entering and saving IPTC data, in that suddenly I'm told the file isn't found, when I try to open it the image area is black, and all I can do is delete it. This is possibly unrelated to my PSE 12 problem, however each time the only way to get a usable copy of the JPG is to re-open the PSD in Elements and re-save as a JPG.
Â
Today, in Elements, when I go to Save As (my usual choice) I go through the usual process but when I check on my hard drive the JPG hasn't been saved.
View 2 Replies
View Related
Feb 13, 2012
I accidently forgot to open a new catalogue before editing my RAW files. Lightroom 3.6 allowed me to edit all my pictures but now I can't export any of them to save as JPEGs. Is there any way for me to export these pictures or do I have to start over from square one?
View 5 Replies
View Related
Mar 3, 2011
I use XPE regularly to edit photos and save them in JPEG format to My Picture folders. However, since yesterday the files that get saved after editing, are no longer JPEGs but some unsupported file which cannot be opened. (See screen shot of properties.) I have tried everything I can think of to fix this, but the results are always the same.
If I edit the photographs with Picasa, there is no problem with the edited output to a folder.
If I save the XPE edited files to the Desktop instead of a folder, they are also alright. I am using Windows 7 Home.
View 3 Replies
View Related
Mar 18, 2013
cs6 extended problem when saving as jpg I get the next screen asking in what IFF option giving me 2 options Amiga & Maya what is this? My previous version cs4 didnt behave like this
View 8 Replies
View Related
Oct 12, 2012
For some reason, some times when I am saving a file I will get an error message stating that the "file cannot be saved as it is in use by another program". The problem lies in that there is not another program open, let alone running the file that I am currently using. Many times Bridge is the only other program even running.This doesn't happen all the time, but more often than not and it is incredibly frustrating because I end up having to attempt to save at least 3 times before it decides to actually do the deed and nothing will have actually changed. No programs closed or anything, just at least 3 seperate attempts to save before it does.this has been going on since I purchased and after a couple months and a few updates I just don't know what else to do.
View 2 Replies
View Related
Dec 22, 2012
3D rendering and saving (CS5 Extended)
View 10 Replies
View Related
May 6, 2013
Cropping and saving makes my images disappear in CS5 Extended
View 4 Replies
View Related
Aug 30, 2012
Currently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
Â
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
Â
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
Â
So, what are my options?
Â
Just copy the plugins from CS5 to CS6?
Â
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
View 3 Replies
View Related
May 29, 2012
I'm happy with the NX version, but if I want to upgrade to XT, how do I do it? I looked on the upgrade options for XT and upgrading from NX, is not there.
View 8 Replies
View Related
Nov 3, 2004
I sometimes have probs with JPEGS saved in PS, when sent to customers, they cannot open them (sometimes). I used to resave i microsoft photoeditor
or corel paint.
View 3 Replies
View Related
Jul 21, 2013
I have a tiff file of a painting I scanned at 300 dpi. It's original image size when I open it is photoshop is 57.8 MB, 18" W by 12.477" H, Res 300. I need to resize it and send it as a 300 dpi jpeg. I have started in the image size dialogue box and just change the W to 11.25. That automatically changes the H to 7.798 and the res still says 300. The file size reduces to 22.6 MB. I click ok and then go to save as and choose jpeg. In the jpeg box I chose 12 Max and baseline standard and click ok. The saved file is reduced to 8.5 MB. When I open it in photoshop, it opens at 300 dpi when I look in the image size box. However, when I send it to someone else and they open it, the file is only 72 dpi. What am I missing to get the file to save at 11.25 inches, jpeg, but remain 300 dpi?
View 10 Replies
View Related
Feb 6, 2013
If we convert a color image set at 300 dpi to grayscale and save as a jpeg, and place in Quark Xpress, the image acts as if the resolution is set at 72 dpi. (In color, it acts as if it's 300 dpi.) If we save it as a grayscale TIFF, it acts properly as if it's 300 dpi.
Â
Is this a bug, a "feature!", or can we change a setting? Is this only true for use in Quark, or do other have this issue placing images in different programs?
View 5 Replies
View Related
May 21, 2012
I am in the process of editing photos from our old website to be used on a new website. I am finding that half of the photos I have will not open in Adobe Photoshop. The error message reads: "Could not complete your request because an unknown or invalid JPEG marker type is found."
Â
What does this mean? How can I fix it? These are the only JPEGS I have of these photos!
View 3 Replies
View Related
Feb 17, 2008
I set levels in photoshop and then when I open them on my PC in Windows picture viewer they are much lighter and overexposed looking. How do I set up my photoshop CS2 to be at the same level.
View 3 Replies
View Related
Jun 2, 2009
I have just installed an Epson 7900 printer, but I cannot get a printer dialogue (File > Print >) to come up with a PSD or TIFF opened in CS4. Oddly, it only opens with a JPEG! With a PSD or TIFF I get the message "To perform printer-related functions like page setup or printing a document you must first install a printer." An Epson tech told me I would likely have to reinstall Photoshop. This is the first attempt to print anything from my relatively new PS CS4 software. Note: I was able to run a test print from Lightroom 2.0. CS4 also apparently fails to find my HP LaserJet and an HP all-in-one inkjet during these times.
View 3 Replies
View Related
Apr 21, 2006
I know that there is some loss of detail when a file is converted from a RAW format into a JPEG file due to compression of the file. What I didn't realize (based on what I've read and am being told) is that the quality of my original JPEG file can slowly degrade simply by opening..saving..and closing the file becaue each time you save a JPEG file, it recompresses the current data...which causes the file to loose additional detail.
View 2 Replies
View Related
Apr 9, 2005
Hii try to attach jpegs all i get is 'this document contains no data'.. i am sometimes able to attach a 41kb jpeg but never anything else...
View 4 Replies
View Related
Jun 11, 2012
Every time I attempt to save output as JPEG, CS6 is substitutes the .eps format and puts up the EPS options dialog.
View 2 Replies
View Related
Sep 19, 2012
im having problems with saving my tiff files and converting. once i convert them to jpegs to email or go to the printers, they are changed and are washed out as if the org tiff before editing. when i open on my comp they are ok but when emailed to someone or once printed are destroyed. i dont think is my colour management as org jpegs files are fine. below are some details of the process.
i open my file (pro photo RGB, 16bit, 3888x2592 10.1MP) i edit the photo. if saving in jpeg i change to 8bit and save with the embedded colour profile button clicked.
View 2 Replies
View Related
Jan 6, 2013
What causes these jaggy lines to appear in my jpegs?I start the file as a CRT in AdobeRAW then open it up in Photoshop CS5.I change the image size to 2400 pixels wide then Save for Web & Devices.At some point the quality starts to degrade and I end up with
View 2 Replies
View Related
May 29, 2012
I´m processing my time lapse sequence(about 500 pictures) to jpegs. I did this same thing with Cs5 many times. When saving the pictures to jpegs in camera raw window, the cs5 software was able to process 2-4 at the same time. In cs6 it processes only one picture at a time and that way is much slower than cs5. Am I missing something? I tried to change the performance settings but it made no difference.
Â
My computer is Mac Pro 8-core 2.8, with 16 gb of ram and quadro 4000 gpu.
View 3 Replies
View Related
Mar 21, 2013
My RAW files look washed out, in camera I introduced warm colours by setting it on cloudy and set to vivid. They look great in other programs, how do I retain the original colors?
View 17 Replies
View Related
Jan 28, 2013
I'm having a problem recently with Photoshop CS5 (Version 12.0 x64), where images look bizarrely noise-y and with wrong colors when I open them in PS. However, if I view these same images in Windows Photo Viewer or Chrome, they look fine. AND, if I save the messed-up looking images in Photoshop, then view the new files in Photo Viewer/Chrome, they appear fine, without any of the noise or errors they were just showing in Photoshop.
Â
An update did just recently come out for my video card (AMD Radeon HD 7870) so I suspect it did something or that some settings are now wrong, but I don't know how to fix this. I have tried tinkering with Photoshop's color settings in Preferences, each time closing / re-opening PS with the images in question, but nothing has worked so far.
Â
 Here is the exact same image, how it appears on the screen when opened in Photoshop. However, the distortion on the blue text only appears visibly on-screen while in Photoshop. If I save it and open it elsewhere, it looks fine. If I copy-paste it to a new document, it still looks distorted, but saving/opening elsewhere reveals an undistorted image.
 Another example. Original, proper image that I created previously: Same image, when opened in Photoshop - lots of noise suddenly in the green and blue bars, on the axe, etc.I did discover that if I opened one of these images and it was all distorted, if I changed the mode to 32 bits/Channel suddenly it would go back to looking normal and without distortion. But I have no desire to work in 32 bit mode, since I want to save jpegs for web use and other simple uses.
View 2 Replies
View Related
Oct 21, 2008
Anytime I open a jpg in CS4 it brings up camera raw. In Cs3, there was an option in file handling called "prefer adobe camera raw for jpeg" I cannot find its equivalent in CS4. I also did uncheck "always open jpeg files with settings using camera raw".
View 2 Replies
View Related
Jan 7, 2009
I needed to use a Jpeg camera original image (created in May 2008) in CS4 and viewed it with Bridge then tried Crtl-R to open it in Camera Raw. The image opened, all the control were there, I brightebed it up a bit and hit OPEN and ... hey - presto the image was corruprted. Tried the same thing on the next image in the folder and got the same results.
We had backed up the folder on DVD so I've lost some time but not the two images.
What's going on?
View 3 Replies
View Related
Feb 25, 2007
I have about 40GB of .jpegs and some Photoshop files that I can no longer open. When I try to open the .jpegs, Photoshop says Invalid JPEG marker. Windows Picture Viewer says no preview available. Internet Explorer just shows a small x in the corner. Others like IrfanView or Paint and say things like Image Header Corrupted or Invalid File Type. I have tried a dozen applications with no luck. I have tried several recovery tools with no luck. The files themselves are still there. The dates are correct and the file sizes are correct. They just can’t be previewed or opened. When I open them in wordpad, the screen is empty. When I open them with a Hex editor, I get all 0’s in the middle section and dots in the right section. When I zip them, the compressed file is still relatively large so there must be some data there.
I had the files on a hard drive (D) that I use for storage. My computer got zapped with a virus or spyware that I was unable to remove so I reformatted my system drive (C) and reinstalled a fresh version of Windows XP. I have done this a half dozen times over the years on several different computers with no problems. This time was different. After Windows installed, I got a screen that said something about orphaned files and that Windows was updating them or renaming them. It scrolled for about an hour through all of my .jpegs.
After this was finished I could not open about half of my .jpegs on the D drive. (I have a backup off most of my files but there about 1,000 shots that I hadn’t back up yet.)
Does anyone have any clues as to what happened or how I can open these files?
View 1 Replies
View Related