VideoStudio :: Heartbeat Sounds In X3 In Project But Normal In File
Oct 17, 2011
I've seen a few references to this in the boards. The sound is like "bleeps" or "heartbeats" only when playing the project. To hear the normal sound, you have to play the file. But if you have an overlay track, this makes it impossible to see how the main track and the overlay track look together while listening to the sound.
One recommended "solution" says to look at a particular youtube video (link provided), which I did. I thought it would provide a solution, but all it is is a demonstration of the problem.
Some say to re-install x3 without the service pack. It seems to me I was having this problem before I downloaded the Service Pack, and I hoped the Service Pack would FIX this problem. That makes me doubtful that the suggested re-install of x3 without the service pack will resolve the problem. And doesn't the Service Pack have other important features that would be missing without it? It's hard to believe the only component to the Service Pack was to screw up the audio.
Furthermore, uninstalling x3 and re-installing it looks like a very long and complicated process. I don't understand why, if Corel is aware of the problem, they don't provide a patch or update that fixes it. Why is it left to the presumably tens of thousands of users to each go through the difficult uninstall and reinstall process?
Do I have to invest in x4 to resolve the problem? I'm very bothered by that. Is there any guarantee that x4 doesn't have the same problem? Corel is aware of a problem with x3 and their response is to shell out another $50 to $99 to fix it? How do I know that x4 doesn't have a major problem that when Corel becomes aware of it, their answer will be to pay yet another $50 to $99 to buy x5?
View 6 Replies
ADVERTISEMENT
Jul 2, 2013
How do I change a project file back to a normal .mov file so that I can play it on my iPad or send it to a freind. I have taken out all the bits that I dont want and woukd like to be able to play it as a normal file and not in "Photoshop"
View 1 Replies
View Related
May 20, 2011
I have noticed this in a couple of videos I've done now, I put together some aerial footage I have done, and after I render it there is a low click-thump sound, almost like a slow heart beat. This is not in an added audio track, and it does not do this in the preview.
I am uploading a clip to youtube as I write this, (will update when done) where I left the native audio in place the whole time (rather than add a music track) so it can be heard.
The raw files are MP4 files from a GoPro HD Hero camera.
ps. in this video, you can hear the sound I am talking about, but only until I fade it out and start the music track
View 11 Replies
View Related
Aug 22, 2011
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
View 7 Replies
View Related
Feb 5, 2012
I've failed to get any sounds out of my version on my desktop even after uninstalling/reinstalling?? I have a version working well on my laptop. What can be the problem? It is a 'trial' version but I have paid for it and have a key but it doesn't seem to want me to enter it and there's no 'buy now' on drop-down menu in 'preferences'.
View 2 Replies
View Related
Apr 10, 2011
I have a question regarding Smart Sounds. Video Studio Pro3X had a "library" of smart sounds that allowed one to create music clips to match video duration. When I installed X4, I noticed the auto music function was not enabled. I also discovered that when smart sounds 5 tried to update in X3 that it maintained that it could not find the source file.
View 5 Replies
View Related
Mar 20, 2013
My new Pro X6 doesn't show me the Smart Sounds. You can't klick something in the smartsound window! I also have installed Pro X4, and here I have all smartsounds!
View 10 Replies
View Related
Dec 2, 2013
I have a 1 hour long project. Nothing too complicated. There are about 20 smart sound clips, no clip longer than about 4 minutes. If I disable the Smart Sound track, the project renders correctly. If I enable the smart sound track, I get a crash at about 95% along the render. If I select smaller portions of the project, say 15 minutes of it. It might render. Sometimes yes, some times a crash at 95%. what I can do to fix the crashing with smart sounds?
Note, same project on two different machines acts the same way. Reseting VS X6SP1 didn't change a thing.
View 1 Replies
View Related
Dec 14, 2011
How many free smart sounds are included with X4 ?
View 1 Replies
View Related
Dec 14, 2013
I am completely new to movie editing of any sort and Corel VS x6 Ultimate is my first dipping of my toes so to speak.
When I import a movie into the timeline, the sound from that movie plays for approximately the first 2-4 minutes, and then cuts out. When looking at the sound mixer in the timeline, I can see where the wave simply cuts out at a point between 2 - 4 minutes (the actual time varies for each movie but it is within that 2-4 minutes bracket for all).
I have imported several movies and it is the same for each of them. The only time it doesn't happen is if the imported film itself is only of short duration (3-4 minutes). The other movies all are of approximately 10 minutes duration.
Is there a limit to how long a movie must be when importing to VS? If so, it seems awfully short?
The movies are game recordings made in game using Nvidia Shadow play. All of them play perfectly fine in an actual movie player with the full recorded sound throughout.
I've tried uninstalling and reinstalling the VS software to no avail. I'd really lik to edit the raw footage from the games to make some nice edited movies (figured I would use these game movies to learn the VS software).
View 4 Replies
View Related
Jan 1, 2013
When I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies
View Related
Feb 15, 2012
I've got a project file that I've been working on for a few weeks. I made a couple of changes to it today and now it will not play through completely. It stalls right at the same spot each time and no matter what I delete in the project (trying to remove the offending element) it still stalls. What I mean by stall is that the player stops and the play button reappears. if I press play again, it plays a few frames and stops.
I'm using VideoStudio 4.
View 2 Replies
View Related
Apr 12, 2012
I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I want to render it into the same to create an AVI master file.
I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.
ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?
I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.
View 5 Replies
View Related
Dec 3, 2011
How to manage files and projects in VideoStudio X4 properly? When I create a new project, all the old libraries pop up --if I archive the files, it goes through and attempts to relink all the older project files, forcing me to sit there and hit "don't relink" for every file (which involves hundreds of files). Now suppose I go through all of this, start with clean libraries, and build a new project --but a month later, I need to open an old project and make some tweaks to it. Since the libraries are empty, when I go to open the old project, it wants to relink all the files again.
This total lack of file and project management is really maddening --couldn't the libraries be included as part of the project? I understand the original files can't be, but at least include a library collection in with the project information, so you don't end up unable to archive older material you're not currently using (forever), unless you want to risk blowing up any possibility of ever opening that project again (forever).
Or is there some way to create a project with a clean set of libraries, and then reload a set of libraries later on?
View 2 Replies
View Related
Dec 22, 2010
I downloaded a 20 sec RAW .mts clip taken with a Panasonic TM700. I wanted to test it in VS X3 to see if the program would handle the file.
I noticed that when selecting "Project" to play the file in the preview window that certain elements of the clip look very noisy or overly sharp...Grainy, if you will. Other elements look slightly blurred. The playback seems smooth though.
However, If selecting "Clip" it looks much better. When I drag the sliders to expand the preview window to it's max size, the "Clip" playback looks flawless yet the "Project" playback, while slightly better, still looks less than desirable.
1). Why?
Here are the properties copied from the Time-line.
2)assuming I were to edit several clips from this camera in X3 to create a short 5-10 min film for upload to Vimeo, how would I best render to maintain the highest quality?
Before I decide to buy this camera, I just want to be sure that X3 can handle the files and that I have a fairly decent grasp of how to properly render the final video. In the mean time, I'll keep editing some sample clips and see how the program handles them. I'll also attempt to render a short film or 2 and see how that goes.
View 1 Replies
View Related
Aug 13, 2013
I am successfully creating a DVD using the Create Disc (DVD) option under the Share menu. I am adding multiple Project files that I have created (.VSP) files to it. Once it is all set up, I select Burning Options add Copyright Information and then I have also clicked on the add Project File to the disc option. However once the disc is created, I cannot find the Project File (.VSP) on the disc.
I am using VideoStudio Pro X4 with all the patches to SP3 installed. PAL system, and I am not receiving any errors.
Am I missing something simple? Does the Project File added to the disc not use the same file extension?
View 3 Replies
View Related
Jan 2, 2013
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
View 7 Replies
View Related
May 29, 2012
I have X5 and am trying to figure out how to get the specific entries in the Media File area to save with the project they were used and saved in.
If I use 5 video and 1 audio files in a saved project, I would like those 6 entries to show up in the media library each time I open the project.
Is there a way to do that?
View 2 Replies
View Related
Jan 2, 2012
ok i am trying to upload a project to youtube and it says that it isn't a supported file. so i went online to look for a file converter and didnt find any that worked. how can i convert it from .vps to something i can upload on youtube/face book?
View 2 Replies
View Related
Feb 2, 2012
If I have multiple project files (.VSP) with different properties, can I batch process the individual files to their own respectful files? That is, if A.vsp is a HD edited video file, B.vsp is a SD file, C.vsp is a SD with different bit rate and screen ratio, etc, can I batch render all the files while they keep their respective properties (Same As First Video Clip)?
View 2 Replies
View Related
May 18, 2011
I would like to create a Word/text file and import it into my Video Studio project file for the credits at the end of a play that I have taped.
View 6 Replies
View Related
Dec 11, 2011
When I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies
View Related
Aug 25, 2012
...adding effects in VS x5 pro. I just downloaded the trial after upgrading to a new laptop running windows 7 and was told I could not use my videostudio 11 or moviefactory 6 plus. So I have video that I imported from my SDHC card in high def, it played fine until I started adding a crossfade and a couple of slow motions. Now, every video had no sound. I have tried deleting them and bring them back in, but still no sound. It will play music over the tracks, but I have lost all my original sound. I thought I would be able to add some music and lower the original soundtrack at certain points, letting it fade in and fade out, allowing for the original audio to play through and along with the music. I am pretty dissapointed right now and need some answers. Also what happened to the moving menus? I am confused with the templates as well... begininng, middle end or complete. Is that instead of moving menus? Can I not make a moving thumbnail menu with music and chapters?
View 10 Replies
View Related
May 6, 2013
Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies
View Related
Dec 14, 2011
Our company has recently purchased civil 3d and im in the process of learning it. I was wondering if there is a way to transfer the normal autocad customization file over to civil 3d and if works. I re-did my hot keys and they dont work either.
I was thinking of having a 2d workspace and a 3d workspace as well.
View 2 Replies
View Related
Jun 17, 2013
restore the the ability of Photoshop to open with a preview on windows machines. That is; a single click on a file from within Photoshop gives a small preview image to tell you what it is you are opening. This is crucial to professional photographers in the industry working quickly with lots of images as I do in the medical/scientific photography field.
Every other version of Photoshop has had this feature and I can tell you a lot of power users like myself are not using CS6 just because a single click doesn't preview what you are opening. My company just spent $10,000 upgrading six machines and no-one is using CS6 for work - they are sticking with CS5. CS6 is only good for 'playing around' with photos, if production is key, then to save time, we need to see what we are opening on a single click - it's a no brainer! Check the forums to see this that is true, and if you are reading this and agree with me, write and tell adobe to fix this - pronto!
View 4 Replies
View Related
Nov 8, 2012
I have a problem when I put many sounds in my animation (in the code source). Just one sound play at all. Maybe I made a mistake or it is possible to have many sounds in edge?
View 8 Replies
View Related
Jan 22, 2014
We've got some Sony XDCam footage coming into Premiere in a .MXF container. Playing back the audio yields a very 'crunchy' distorted sound. 'S' sounds sound lispy and there is generally a lot of additional noise.Opening these files in Sony Vegas doesn't have any audio problems at all, everything sounds fine which leads me to beleive that Premiere is the problem.
However, I've tried exporting audio from Sony Vegas to re-sync with the clips in Premiere, but the audio STILL sounds distorted and crunchy.Opening the audio in Audition ends up being a little better, but still not as clean as how the original audio sounds in Sony Vegas.
Here are all the details I've got for ya:
- Audio recorded in 3 channels, 2 stereo channels from the on board mic and 1 channel through a boom mic (The Sony cams handle up to 8 channels)
- Footage was ingested through Prelude and renamed when copied. (The actual files were not renamed, only the metadata that Prelude tags onto the clips)
- We are working on PC machines (Windows 8) as well as Mac (OS Mavericks) and ALL machines are having the same problem.- We experience the same problem regardless of whether the files are stored on our network NAS or locally
- We are all on the latest version of Premiere CC 7.2.1 (4)
I suspect that it has to do something with how Premiere is decoding the audio from the .MXF clips. Sony apparently decodes it just fine, which makes sense since the Cameras are Sony cams to begin with.I am now noticing that ALL audio in Premiere is experiencing this same effect! Regardless of container/codec.
View 1 Replies
View Related
Jan 8, 2014
I don't need Stop, need pause for relaunch the sound in the same time of I make pause.
And it's posible play the sound in especific time of sound?
View 1 Replies
View Related
Jun 25, 2013
how to mute sounds or turn the volume to 0 and back up again using [URL] ......
Its a great way to use soundJS in edge but its a little incomplete since it only outlines play.
I've tried looking into the API to use the setMute(true); but I only get a bunch of errors in Edge when I try to do that
View 8 Replies
View Related
Apr 13, 2013
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
View 1 Replies
View Related
