Our company has recently purchased civil 3d and im in the process of learning it. I was wondering if there is a way to transfer the normal autocad customization file over to civil 3d and if works. I re-did my hot keys and they dont work either.
I was thinking of having a 2d workspace and a 3d workspace as well.
i want to import my 2013 office workspace in to my 2012 home Version.
View 2 Replies View RelatedIs it possible to have the area portion of the PROPERTIES PANEL display Acres instead of, or in addition to, square feet for a closed object? If so, how to I accomplish this?
View 1 Replies View RelatedI have altered my CUI so when I double click on civil 3d objects it opens up their properties for quick editing. Never had a problem pre 2013 and I am sure this is something I did but am lost.
Every time I double click on any object it just opens up the properties box. It skips right over my double click customization.
I am using civil 3d 2012 and i want to use rail assembly for my single track rail project. i want to know how can i customize my assembly. As in given defaulf assembly i can keep the width of sub base same on both side of track centerline. But my requirement is to use different widths on left and right side of centerline of track.
View 1 Replies View Relatedhow to load .NET project dll file in AutoCAD LT for customization ? Because in plain AutoCAD command is there named NETLOAD to load DLL file but this command is not working in AutoCAD LT.
View 1 Replies View Relatedset up my profile view and profile view styles as per attached pdf and dwg?
View 3 Replies View Relatedunable to load customization file:
c:usersdantappdata
oamingautodeskautocad mechanical20152
18.2enusupportacetmain.cuix
that customization group already exists.
I have two boxes here where something seems to create a acfusion.cuix, an aliasconcept.cuix and a acetmain.cuix. If I unload them and restart, I dont get the error but the have been created. Could a startup lisp be creating these? I havent done anything with lisp files. the target in the shortcut doesnt seem to be pointing to a lisp file.
We dont need these cuix files how can I stop them from being created on start up?
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
Whenever I double-click on a single line of text, I get an AutoCAD message "Unable to find main dictionary. Could not start speller." I am using AutoCAD 2012. I have not changed to the path in my main customization file. It is:
C:UsersDan Potyrajappdata oamingautodeskautocad 2012 - english 18.2enusupportacad.cuix.
I had this error show up two days ago. My machine maxes my memory out at 12gb when I try to open this file. I've tried to do a recovery, open the .bak and .sv$ files, and insert it into a new drawing but none of this worked. I was able to open it in True View and convert it to another DWG file. Doing this, I saved all my line work, but lost my models. I recreated my drawing from the line work and everything was fine up until now.
I am getting this error again but I can't recover it. I can't do the True View thing this time either. Everything on this project is gone now.
I don't know if AutoCAD Civil 3D just has serious issues, or if it is our network. C3D constantly processes and starts acting strange after an hour or so of working with it. Things like Duplicate sites, or not being able to move feature lines from one site to another.
Our network though is running out of space. We only have a 1Tb server, but in Windows Explorer, the bars are red with only 28.5gb free, and I'm sure it hasn't had any maitanance like defragmentation in a very long time.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
How do I change a project file back to a normal .mov file so that I can play it on my iPad or send it to a freind. I have taken out all the bits that I dont want and woukd like to be able to play it as a normal file and not in "Photoshop"
View 1 Replies View RelatedIt appears when we attempt to open the file then C3D crashes.
Modeling Operation error: Attempt to evaluate a plane with zero normal.
One of my users got this error in a drawing with about 8-10 fairly complex grading objects in it. I had told him not to leave them as grading objects but he was convinced he could make it work.
HP 4600 4 GB Ram
Intel Core 2 Duo 2.66
ATI FireGL V5600 (8.453.1.3000)
Windows XP PRO (SP 3)
2008; (All SP) LDT, MAP 3D
2009; Civil 3d 2009 Update 2 Version 3, Map 3D, Raster
I was recently trying to find the normal depth in a natural channel to use as an outfall water surface elevation in SSA. I double checked the normal depth calculations using the Express Add-On in Civil 3D. I found that while the normal depths correlated closely for channels with a single roughness coefficient, they varied considerably if a composite roughness coefficient was used for the left and right overbanks. This leads me to believe that composite roughnesses are being calculated incorrectly in SSA. I would like to use SSA for floodplain analysis, but am unwilling to do so until I have confidence in the calculations.
View 2 Replies View RelatedFor the purpose of backup, where on my drive is the file containing workspace customization settings stored?
View 9 Replies View RelatedI'm preparing for our office wide install of Infrastructure Design Suite 2014 so we can begin training/using Civil 3D 2014.
I’m reading through readme file for the Architecture-MEP 2014 Object Enabler & noticed that it’s installed as part of the normal installation of all AutoCAD 2014 based products, including Civil 3D…woohoo! Unfortunately, the Structural & Plant OE’s don’t appear to have a readme file. Are these also installed as part of the normal installation of C3D 2014? Or will they need to be installed separately?
I migrated from AC3D 2010 32-byte to AC3D 2012 64-byte recently. When I migrate my projects to 2012 and open the old 2010 drawings in 2012 I lose the surface lines out of my section sets. It doesn't seem to bother the profile views, only the section views.
Is there a way to work around this problem w/o having to regenerate the section views?
I've just received 358 .dwg files from the owner of my project. They failed to provide an index along with the files.Is there a way to "Publish" all 358 files without having to open each .dwg? PDF is preferred.
View 3 Replies View RelatedHow can I transfer (download) measured data from total stations 'Trimble' and "Leica" to AutoCAd Civil 3D 2013? Must I find a module from the sites of these manufacturers? Or how can I change from total stations formats to the Feald Book format?
View 6 Replies View Relatedi know the traditional way of doing this is just export to autocad then open with inroads and do grading stuff again.are there any easier ways? i think it's no but boss wants to get a confirmation on the internet.like grading objects to inroad grading and corridor to inroads corridor.
View 4 Replies View RelatedI have been working on a template (.DWT) for Civil3D 2012. I decided to continue my work recently with a newer vesion C3d 2013, and to my shock there seems to be no way at all to transfer my newer settings (I.E.: default layering, default data bands, newer CODECS, etc to the C3d 2012 version. This is about a week's worth of work that I will have to replicate manually to C3d 2012. I cannot believe that the 2 versions are this completely incompatable.
View 9 Replies View RelatedI Created a Surface Profile along my existing survey alignment (Alignment 1). I copied that to a layout profile. I need to transfer that profile to an alignment I drew approximately 8 ft to the right (with less verticies - Alignment 2).
I created an offset alignment of Alignment 2 - Left 8 ft. I Created a Surface Profile from the 8 ft offset. Using that surface profile along Alignment 2 might be good enough, but I'd prefer to use the surface profile created from Alignment 1 because it represents my high point. I am creating a construction grade x-sec assembly that will run along (or 3-6 inches higher than the existing Centerline). But I want to hold Alignment 2.
I think what I need to do is to be able to hold Alignment 2, but use the Profile generated from Alignment 1 in my Corridor.
How can I dwg file in the excel file in c # winform transfer?
View 5 Replies View RelatedI've seen a few references to this in the boards. The sound is like "bleeps" or "heartbeats" only when playing the project. To hear the normal sound, you have to play the file. But if you have an overlay track, this makes it impossible to see how the main track and the overlay track look together while listening to the sound.
One recommended "solution" says to look at a particular youtube video (link provided), which I did. I thought it would provide a solution, but all it is is a demonstration of the problem.
Some say to re-install x3 without the service pack. It seems to me I was having this problem before I downloaded the Service Pack, and I hoped the Service Pack would FIX this problem. That makes me doubtful that the suggested re-install of x3 without the service pack will resolve the problem. And doesn't the Service Pack have other important features that would be missing without it? It's hard to believe the only component to the Service Pack was to screw up the audio.
Furthermore, uninstalling x3 and re-installing it looks like a very long and complicated process. I don't understand why, if Corel is aware of the problem, they don't provide a patch or update that fixes it. Why is it left to the presumably tens of thousands of users to each go through the difficult uninstall and reinstall process?
Do I have to invest in x4 to resolve the problem? I'm very bothered by that. Is there any guarantee that x4 doesn't have the same problem? Corel is aware of a problem with x3 and their response is to shell out another $50 to $99 to fix it? How do I know that x4 doesn't have a major problem that when Corel becomes aware of it, their answer will be to pay yet another $50 to $99 to buy x5?
How to transfer styles individually between drawings in Civil 3D 2013.
View 2 Replies View RelatedHow do I transfer 3d polylines from civil 3d 2010 to 2004?
View 2 Replies View RelatedHow do I transfer a CUIX file from AutoCAD2012 to a backup?
View 4 Replies View Relatedrestore the the ability of Photoshop to open with a preview on windows machines. That is; a single click on a file from within Photoshop gives a small preview image to tell you what it is you are opening. This is crucial to professional photographers in the industry working quickly with lots of images as I do in the medical/scientific photography field.
Every other version of Photoshop has had this feature and I can tell you a lot of power users like myself are not using CS6 just because a single click doesn't preview what you are opening. My company just spent $10,000 upgrading six machines and no-one is using CS6 for work - they are sticking with CS5. CS6 is only good for 'playing around' with photos, if production is key, then to save time, we need to see what we are opening on a single click - it's a no brainer! Check the forums to see this that is true, and if you are reading this and agree with me, write and tell adobe to fix this - pronto!
Is there a quick way e.g. export Registry Key etc to transfer the files and paths specified in Options?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Transfer styles/settings from 2012 template to 2011 template
View 4 Replies View Relatedi need to guide for using sanding total station for exchange data now my question is that do there is any way in civil 3d survey menu that i can use sanding total station for exchange data?
View 1 Replies View RelatedI have just formatted my Computer and installed Illustrator CS4. As now I am using old Operating System, so I can't able to install Illustrator CS6. I have some files in CS6. So, now how can I transfer all file from Illustrator CS6 to CS4? Is there any online process?
View 1 Replies View Related