AutoCAD Civil 3D :: Way To Transfer Newer Settings
Apr 24, 2013
I have been working on a template (.DWT) for Civil3D 2012. I decided to continue my work recently with a newer vesion C3d 2013, and to my shock there seems to be no way at all to transfer my newer settings (I.E.: default layering, default data bands, newer CODECS, etc to the C3d 2012 version. This is about a week's worth of work that I will have to replicate manually to C3d 2012. I cannot believe that the 2 versions are this completely incompatable.
View 9 Replies
ADVERTISEMENT
Jan 13, 2012
Transfer styles/settings from 2012 template to 2011 template
View 4 Replies
View Related
Nov 19, 2012
C3D2012 SP2.1
What I have is a nice production drawing, that has NEVER even been opened in C3D2013. I JUST finished adding labels for some new pipes and structures that are in an Xref. I saved the drawing and closed it to work on a different project while plotting. In SSM, I select the sheets to Publish, the first 4 plot without issue, then I get a CER without a Fatal Error...I can still work on the nbow current drawing...it appears that SSM crashed while loading the aforementioned sheet I had been working on.I close everything down, restart C3D2012, open the same drawing I had just labeled, says it needs to be recovered, so I let it finish loading (I've found that stopping the load will almost always cause C3D to hang indefinitely), close that drawing, then run recover, finds 2 errors, allow to fix, am greeted with the message box "This drawing has been saved by a newer version of C3D. All C3D commands are disabled in this drawing."Â
Wait a dang minute, SSM crashes and somehow (the save time is still the same as when i manually saved it in 2012) saves it as a C3D2013 file...even though it is still opening as a 2010dwg format file? Opening the file in Notepad even shows it was last saved in 2012.
View 6 Replies
View Related
Jul 1, 2013
on newer drawings ( amonth or two old) my crosshairs disappear in paper space (model space is fine)....but on older drawings (some are years old) the crosshairs works fine. neither the older or newer drawings were started by me so i can;t be sure of how they were set up, but (i think) it must have something to do with the way these newer dwgs were set up.Â
i was using C3D 2011 when the issu started and upgraded to C3D 2013 and i still have the issue. I've loaded the latest service pack but no change.
C3D 2013
windows 7 pro
service pack 1
64 bit
intel xeon 3.07 ghz
12 gb ram
View 4 Replies
View Related
Sep 18, 2012
Is there a way to transfer the settings of one autocad to another computer?
My work station at work has autocad set up with alot of tool bars and windows open. Is there a way i can save that and import those same settings so i can have a exact copy of my works Autocad at home too?
I hope this explains what i mean.
View 9 Replies
View Related
Jun 16, 2011
can i transfer all setting of autocad from one pc to another pc which also run autocad i wish can keep all thing as before at my previous pc including all tool bar i position can i do that?
View 9 Replies
View Related
May 17, 2012
I hate having to setup one pc to all the autocad setting that we need and then having to go do 27 more. I want to take my exact setup, menu, system variables, colors, file locations...everything and apply it to 27 more computers. We have tried using profiles but it only coppies over a few things and some are still missing. Is there are way to copy everything?
View 9 Replies
View Related
Jan 6, 2012
I am upgrading to 2012 from 2008. Will all of my custom settings/ linetypes/ blocks, etc. automatically transfer over?
View 1 Replies
View Related
Apr 23, 2013
The mother board in my old PC went out, I bought a new one with Windows 8. Loaded Autocad 13 and want to transfer all my settings from old hard drive (now a slave) to the new one.Â
View 7 Replies
View Related
Apr 7, 2008
How do I transfer the PS CS3 seetings from my old PC to my new PC?
View 1 Replies
View Related
Mar 19, 2013
is it possible to transfer settings from an older version of Lightroom?
View 1 Replies
View Related
Jun 11, 2009
I am trying CS3 with Windows 7. Where would I put the "Adobe" settings folder that I copied from XP? XP=(C:Documents and SettingsuserApplication DataAdobe)
View 1 Replies
View Related
Nov 24, 2012
I subcontract a lot of event work. I'm still using an older MBP which is 32bit so I can't upgrade to LR4 yet which requires a 64bit processor.
Â
The studio that contracts me is running LR4 and they don't seem to think that the develop settings I make in LR3.5 are transferring to LR4. Is this possible?
I'm thinking an easy work-around would be to export all the files as DNGs? This would automatically include all changes that I make wouldn't it?
View 7 Replies
View Related
Jul 3, 2013
when I upgraded my catalog from Lightroom 4 to Lightroom 5, it appears that not all of the my develop settings transfered for all photos. If I am to open the catalog in Lightroom 4, the appear to still exist. How can I see all the settings in Lightroom 5.
View 3 Replies
View Related
Jun 30, 2013
Lightroom 5. I have combined two catalogs into one "Master Catalog" per Julian Kosts tutorial ([URL]....) without incident. However, my presets are not to be found. Could there be other issues? How Do I properly get these presets into my Master Catalog?
Â
How to transfer Lightroom settings from one catalog to another?
View 1 Replies
View Related
May 14, 2013
I have several Lightroom catalogs from over the years, many of the from older versions and many of the catalogs contain develop settings from photos I have on my current catalog.
Â
The thing is I have some picture folders with rates, develop setings and more things from an old catalog that I want to transfer to my new catalog from Lightroom 4.4. I want to transfer just the settings and rates, nothing else, i already have the photos, sometimes with many photos rated and developed.
Â
Is there a way to transfer just the settings and rates of a certain set of photos from one catalog to another one?
View 1 Replies
View Related
Sep 2, 2012
How can I transfer (download) measured data from total stations 'Trimble' and "Leica" to AutoCAd Civil 3D 2013? Must I find a module from the sites of these manufacturers? Or how can I change from total stations formats to the Feald Book format?
View 6 Replies
View Related
May 10, 2013
i know the traditional way of doing this is just export to autocad then open with inroads and do grading stuff again.are there any easier ways? i think it's no but boss wants to get a confirmation on the internet.like grading objects to inroad grading and corridor to inroads corridor.
View 4 Replies
View Related
Apr 9, 2012
I Created a Surface Profile along my existing survey alignment (Alignment 1). I copied that to a layout profile. I need to transfer that profile to an alignment I drew approximately 8 ft to the right (with less verticies - Alignment 2).
I created an offset alignment of Alignment 2 - Left 8 ft. I Created a Surface Profile from the 8 ft offset. Using that surface profile along Alignment 2 might be good enough, but I'd prefer to use the surface profile created from Alignment 1 because it represents my high point. I am creating a construction grade x-sec assembly that will run along (or 3-6 inches higher than the existing Centerline). But I want to hold Alignment 2.Â
I think what I need to do is to be able to hold Alignment 2, but use the Profile generated from Alignment 1 in my Corridor.
View 6 Replies
View Related
Jan 30, 2013
How to transfer styles individually between drawings in Civil 3D 2013.
View 2 Replies
View Related
Dec 14, 2011
Our company has recently purchased civil 3d and im in the process of learning it. I was wondering if there is a way to transfer the normal autocad customization file over to civil 3d and if works. I re-did my hot keys and they dont work either.Â
I was thinking of having a 2d workspace and a 3d workspace as well.
View 2 Replies
View Related
Jul 6, 2011
How do I transfer 3d polylines from civil 3d 2010 to 2004?
View 2 Replies
View Related
May 17, 2013
Is there a quick way e.g. export Registry Key etc to transfer the files and paths specified in Options?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
Nov 8, 2013
I have a program which had compiled for acad 2010 and windows XP x86. I want to rebuild for acad 2014 and win7-8 x64. I did import 2014's dll (AcMgd.dll, AcDbMgd.dll, AcCui.dll, AcCoreMgd.dll) and built. There is no errors. But when I wantted to run one of my commands it gives an error. I attached the error message.
View 2 Replies
View Related
Oct 25, 2013
Converting/viewing higher version drawn .dwg files.? My version is 2011. & i had recd some higher version files that shows a message as:
I cant open or view these dwg files coz they are made from more recent versions. I had checked with autodesk.com for converter but failed?
View 4 Replies
View Related
Nov 9, 2012
i need to guide for using sanding total station for exchange data now my question is that do there is any way in civil 3d survey menu that i can use sanding total station for exchange data?
View 1 Replies
View Related
Feb 15, 2013
I'm trying to work in some drawings that we got from another employee working in a different office using Civil. When I open the drawing, I get a message that says:
This drawing contains newer versions of objects
To work with the newer objects in a limited fashion, enable proxy graphics and then resave the drawings in the current version. You can also export the drawing to AutoCAD; however, be aware this permanently converts AEC objects to basic AutoCAD objects.
I tried typing in PROXYGRAPHICS and turning it to 0, then resaved it and closed it. When I opened it again, it still gives me the same message. I had the person that sent us the drawings resave it to different versions of AutoCAD. I still get the message.
The biggest problem I'm having with these drawings is that the units are set incorrectly for our use. They are set to civil standards. Like, when I xref in our titleblock, it comes in as being 3 inches long instead of 3 feet long. When I type in UNITS into the command line to change them, I get the message: Command not allowed because drawing contains objects from a newer version of this application. I tried usnig the -EXPORTTOAUTOCAD command, but I get the same message.
View 1 Replies
View Related
Sep 23, 2011
Running inventor 2010, Installed 2012 to get myself acquainted with the program before totally making the switch, In an assembly everytime I constrain something, or move it it gives me this error. Also I cannot bring this assembly into a drawing because of unresolved issues, yet i have fixed all resolved issues. I would like to get the ribbon platform down before I uninstall inventor 2010...any possibilities
View 1 Replies
View Related
Jul 24, 2013
Whenever anyone at the company tries to open a model that has a decal part in it, the File Edit window comes up asking if the person wants to check out the part. As decals generally never change after they are created, they are never desired to be checked out. After saying no to check out, the window then reappears stating that the local is never than the vault, even though you just finished a Get operation. Is there anyway to keep these files from needed constant updating?
View 5 Replies
View Related
Oct 12, 2012
We are on ACA 2011 and created a ceiling plan. Sent it to a consultant that is on ACA 2013.The file was saved down, but when we try to make a new ceiling or copy an existing grid, we get the following:
Command: _AecCeilingGridAdd.
Command not allowed because drawing contains objects from a newer version of this application.
View 2 Replies
View Related
Jan 28, 2013
My AutoCAD 2013 crashed and as a result the recovered file was saved in 2013 format, instead of my automatic save profile option version set to AutoCAD 2000.
As we have other users in the office without AutoCAD 2013, how do i change the default crash save to a newer version (ie. AutoCAD 2000)?
View 1 Replies
View Related
