I have a program which had compiled for acad 2010 and windows XP x86. I want to rebuild for acad 2014 and win7-8 x64. I did import 2014's dll (AcMgd.dll, AcDbMgd.dll, AcCui.dll, AcCoreMgd.dll) and built. There is no errors. But when I wantted to run one of my commands it gives an error. I attached the error message.
View 2 Replieshow to move a file in inventor from the 2014 version to last years version which was 2013 because my teacher's computer isn't reading my file.
View 5 Replies View Relatedis there anyway of opening old files from previous edition of autocad on the newer version, have a file from a few years ago and it wont open now on the new one?
View 9 Replies View RelatedConverting/viewing higher version drawn .dwg files.? My version is 2011. & i had recd some higher version files that shows a message as:
I cant open or view these dwg files coz they are made from more recent versions. I had checked with autodesk.com for converter but failed?
C3D2012 SP2.1
What I have is a nice production drawing, that has NEVER even been opened in C3D2013. I JUST finished adding labels for some new pipes and structures that are in an Xref. I saved the drawing and closed it to work on a different project while plotting. In SSM, I select the sheets to Publish, the first 4 plot without issue, then I get a CER without a Fatal Error...I can still work on the nbow current drawing...it appears that SSM crashed while loading the aforementioned sheet I had been working on.I close everything down, restart C3D2012, open the same drawing I had just labeled, says it needs to be recovered, so I let it finish loading (I've found that stopping the load will almost always cause C3D to hang indefinitely), close that drawing, then run recover, finds 2 errors, allow to fix, am greeted with the message box "This drawing has been saved by a newer version of C3D. All C3D commands are disabled in this drawing."
Wait a dang minute, SSM crashes and somehow (the save time is still the same as when i manually saved it in 2012) saves it as a C3D2013 file...even though it is still opening as a 2010dwg format file? Opening the file in Notepad even shows it was last saved in 2012.
Running inventor 2010, Installed 2012 to get myself acquainted with the program before totally making the switch, In an assembly everytime I constrain something, or move it it gives me this error. Also I cannot bring this assembly into a drawing because of unresolved issues, yet i have fixed all resolved issues. I would like to get the ribbon platform down before I uninstall inventor 2010...any possibilities
View 1 Replies View RelatedWhenever anyone at the company tries to open a model that has a decal part in it, the File Edit window comes up asking if the person wants to check out the part. As decals generally never change after they are created, they are never desired to be checked out. After saying no to check out, the window then reappears stating that the local is never than the vault, even though you just finished a Get operation. Is there anyway to keep these files from needed constant updating?
View 5 Replies View RelatedWe are on ACA 2011 and created a ceiling plan. Sent it to a consultant that is on ACA 2013.The file was saved down, but when we try to make a new ceiling or copy an existing grid, we get the following:
Command: _AecCeilingGridAdd.
Command not allowed because drawing contains objects from a newer version of this application.
My AutoCAD 2013 crashed and as a result the recovered file was saved in 2013 format, instead of my automatic save profile option version set to AutoCAD 2000.
As we have other users in the office without AutoCAD 2013, how do i change the default crash save to a newer version (ie. AutoCAD 2000)?
When upgrading to a newer version of PS (ps7 -> pscs), would i need to transfer all my saved files (projects, brushes, styles, actions, etc...) manually (drag and drop method), or would the installation/setup process do everything for me?
I'm afraid that if i do decide to upgrade to CS and need to transfer all my files, i might unknowingly miss an essential folder and lose it forever when uninstalling the older version.
(or does the setup/installation take care of getting rid of the older version, too?)
i have files generated with photoshop 2.0 running on Mac OS 6.0.4. How can I use these files with a more recent version of Photoshop?
View 2 Replies View RelatedI have Creative Cloud Illustrator CS6 Version 16.2.0. I keep gettin a message saying The file can't be opened because it was generated in a newer Version of Illustrator. How can it be a newer version?
View 1 Replies View RelatedI use illustrator CS version 11, is there a way to open illustrator files saved and created in a newer version of illustrator?
View 5 Replies View RelatedHow can I save a file in CS5 that has been created by a newer version?
View 3 Replies View RelatedA client has sent me files created in a version newer than CS5. When I import them and the PDF objects are re-interpreted I get an error message that, during "An unknown imaging construct was encountered." The resulting images have gradients that are extremely bandedb - though I do not know if this is atributable to the error.
The client insists that he is a highly-experienced Illustrator guru, his files are perfect and he will not change them in any way. He has also delcared that it is quite impossible (for him) to convert his artwork to TIFF files. I am able to do this with the files he has provided quite easily, and do not understand what his issue(s) might be.
Assuming that I am the weak link in the chain, what can I do to improve the quality of his images with the software - CS5 - I have?
Everytime I open up a file in Photoshop, it says, 'Linotype Fontexplorer version fc4 or newer cannot be found'. I recently deleted that program, how can I get Photoshop to stop looking for it?
View 3 Replies View Relatedwhen I try to preview my project, I do not get any video. I can hear the audio though. When I preview individual clips I have both audio and video.
View 7 Replies View RelatedI have a parameters only part which drives the parts in an assembly. When I change the parameters and go back into the assembly I am getting an error. I can accept the error and drag the parts around and they snap into place, which ends the error. It works, but isn't very appealing to the eye. Is there any way to fix this?
View 1 Replies View RelatedI have a sketch that Inventor changes its status between under constrained, over constrained, and fully constrained depending on dimensions (makes sense), and wether I rebuild the model (WTF?).
Steps to reproduce:
1) Open the attached .ipt file.
2) Examine Sketch11 (under Face3) It should be fully constrained.
3) Exit the sketch. Open the parameters dialog and change the value of "angle" from 45 to 60. (If you get an error message change it to 50 first, then 60. It's a work in progress.)
4) Re-examine Sketch11. It is now under constrained.
5) Exit the skecth and go to the manage tab. Click "Rebuild All".
6) Re-examine Sketch11. It is now fully constrained.
7) Scratch your head and post back with your theory.
In the attached file there is a User Parameter, "Antal_ledekasser". Inventor has calculated its value to 2.
If you do the math by hand then you see the value should be 5.
Rebuild doesn't force recalculation.
There is an iLogic rule in the part, but this also fails to force recalculation:
iLogicVb.UpdateWhenDone=True
InventorVb.DocumentUpdate()
ThisDoc.Document.Rebuild2
ThisDoc.Document.Update2
Manual work around is to change the formula, then the value is recalculated.
iLogic work around is to change a parameter-value - and run the rule TWICE.
Question: How do I force a real rebuild, that actually wil recalculate parameter-values the first time I run the iLogic rule?
Background: The attached file is a little subset of the skeleton in a large assembly that is controlled by iLogic. The rules are placed in the topassembly, and writes vaules to the skeleton-file.
After writing values to skeleton-parameters I try to force them through with this iLogic
RuleParametersOutput()
InventorVb.DocumentUpdate()
iLogicVb.RunRule("Skeleton", "Update")
Later in the process I use calculated values to decide which components should be active. But my logic fails because my decisions are made on faulty values.
I did manage to get the updating work in 2011. But after migrating to 2012, it seems impossible to have it update correct. The user has to run rules several times, and doing manually updates to get a correct model.
I had a corridor built with a CulDeSac on a side access road. Problem I was running into was the daylighting from the assembly on curve so I finally decided that I needed to move the CulDeSac 20 feet further down the road. I deleted the CulDeSac region and when I did that the Final Grade for the EOPs profiles were deleted with it. I then moved the EOP alignments (Left & Right side) 20 feet further down the road and readjusted the start and ending of the alignments. Then went back to the existing grade profiles of the EOP alignments and redrew in the Final Grade profiles. I added back in the Regions for each Baseline and set the targets to Road CL Alignment and Final Grade Profile. These are the exact same steps I took originally to build the CulDeSac the first time and it worked great. Now it won't even build the CulDeSac.
When I deleted the region the FG of the EOP disappeared, but actually still showed in the Toolspace so the new FG profiles with same name were seconds/duplicates. Once I saw that I deleted the originals from Toospace and renamed the duplicates and used them for the Baselines.
Windows 7 Prof w/ SP1, 64bit, Xeon 3Ghz, 16GB
Civil 3D 2013
I would like to add a Rebuild Surface command to my Ribbon Modify Panel. I would also like to have it included in my Right Click menu after a surface is selected. There doesn't appear to be any way to initiate a surface rebuild from the command line and I don't find a command for it in the CUI editor.
There does seem to be a rebuild command in the API but I am not a programmer. Is this possible without programming?
2012. I have contours from a corridor merged into a full surface. I labeled the contours, then had to rebuild the corridor after the profile changed.
The contour labels all vanished and had to be redone. While surface contours work well for roadway corridors with few intersecting roads. I am not finding them to be useful for parking lots. I am thinking I will have to go back to the extract all contours from model and neaten them up for acceptable graphic presentation, then label them using the label line function and pray they don't change. i.e. old LDD work flow.
The automatic outside boundary also does not work well when updating parameters and rebuilding. The old fashioned LDD boundary from polyline seems to work better most of the time.
I have resorted to partially recreating frames.
I am working on one frame where I have rebuilt two parts multiple times and they still revert to being rotated slightly after performing a rebuild. I can continually hit the rebuild button and watch them rotate back and forth. Is there a known fix for some of these oddities with FG?
Notice the two tubes in the attached pic. I do not understand why they continue to rotate out of alignment after they are placed correctly. (They even look fine when placed.)
Inventor Pro 2011
I have 5 intersections in a drawing and i try to update all the intersections regions one after the other with "Update Regions and Rebuild Corridor". The problem is that sending up to date some intersections send other intersections (previously updated) out of date. So i cannot have all my intersections updated. The only way i found to correct this is to "Update regions automatically". but this way i cannot make changes to regions manually.
View 3 Replies View RelatedHow can you force the rebuild of a corridor in C3D 2014 even if the corridor thinks it is up to date? (no yellow exclamation shield icon).
We have .NET subassemblies that react to changes in the location of objects in XRef'd files.
In C3D 2012 when we changed the XRef'd objects position, we would right click the corridor and select rebuild and the subassemblies would rerun (no matter what).
In C3D 2014 if you select rebuild, the corridor does nothing if it thinks nothing has changed.
I have some code that edits the breaklines of a surface. Everything works correctly, except for the surface rebuild when finished.At the end of the command I use:
surf.Rebuild();
But when the command completes I still need to manually rebuild the surface to see the result of my command's edits. This is in both 2013 & 2014. I shouldn't need to do this and was just wondering why the Rebuild() method doesn't always work.
Also, is it possible to toggle the Automatic Rebuild option for surfaces in code?
I have been working on a template (.DWT) for Civil3D 2012. I decided to continue my work recently with a newer vesion C3d 2013, and to my shock there seems to be no way at all to transfer my newer settings (I.E.: default layering, default data bands, newer CODECS, etc to the C3d 2012 version. This is about a week's worth of work that I will have to replicate manually to C3d 2012. I cannot believe that the 2 versions are this completely incompatable.
View 9 Replies View RelatedI'm trying to work in some drawings that we got from another employee working in a different office using Civil. When I open the drawing, I get a message that says:
This drawing contains newer versions of objects
To work with the newer objects in a limited fashion, enable proxy graphics and then resave the drawings in the current version. You can also export the drawing to AutoCAD; however, be aware this permanently converts AEC objects to basic AutoCAD objects.
I tried typing in PROXYGRAPHICS and turning it to 0, then resaved it and closed it. When I opened it again, it still gives me the same message. I had the person that sent us the drawings resave it to different versions of AutoCAD. I still get the message.
The biggest problem I'm having with these drawings is that the units are set incorrectly for our use. They are set to civil standards. Like, when I xref in our titleblock, it comes in as being 3 inches long instead of 3 feet long. When I type in UNITS into the command line to change them, I get the message: Command not allowed because drawing contains objects from a newer version of this application. I tried usnig the -EXPORTTOAUTOCAD command, but I get the same message.
I have 4 main catalogs in LR 4.3 at the moment. They all appear as folders in LR.What I'd like to do is create one main folder, with all four of these in there. Is that possible without rebuilding all of the catalogs?
View 7 Replies View Relatedon newer drawings ( amonth or two old) my crosshairs disappear in paper space (model space is fine)....but on older drawings (some are years old) the crosshairs works fine. neither the older or newer drawings were started by me so i can;t be sure of how they were set up, but (i think) it must have something to do with the way these newer dwgs were set up.
i was using C3D 2011 when the issu started and upgraded to C3D 2013 and i still have the issue. I've loaded the latest service pack but no change.
C3D 2013
windows 7 pro
service pack 1
64 bit
intel xeon 3.07 ghz
12 gb ram