When upgrading to a newer version of PS (ps7 -> pscs), would i need to transfer all my saved files (projects, brushes, styles, actions, etc...) manually (drag and drop method), or would the installation/setup process do everything for me?
I'm afraid that if i do decide to upgrade to CS and need to transfer all my files, i might unknowingly miss an essential folder and lose it forever when uninstalling the older version.
(or does the setup/installation take care of getting rid of the older version, too?)
is there anyway of opening old files from previous edition of autocad on the newer version, have a file from a few years ago and it wont open now on the new one?
I have a program which had compiled for acad 2010 and windows XP x86. I want to rebuild for acad 2014 and win7-8 x64. I did import 2014's dll (AcMgd.dll, AcDbMgd.dll, AcCui.dll, AcCoreMgd.dll) and built. There is no errors. But when I wantted to run one of my commands it gives an error. I attached the error message.
I have Creative Cloud Illustrator CS6 Version 16.2.0. I keep gettin a message saying The file can't be opened because it was generated in a newer Version of Illustrator. How can it be a newer version?
Everytime I open up a file in Photoshop, it says, 'Linotype Fontexplorer version fc4 or newer cannot be found'. I recently deleted that program, how can I get Photoshop to stop looking for it?
What I have is a nice production drawing, that has NEVER even been opened in C3D2013. I JUST finished adding labels for some new pipes and structures that are in an Xref. I saved the drawing and closed it to work on a different project while plotting. In SSM, I select the sheets to Publish, the first 4 plot without issue, then I get a CER without a Fatal Error...I can still work on the nbow current drawing...it appears that SSM crashed while loading the aforementioned sheet I had been working on.I close everything down, restart C3D2012, open the same drawing I had just labeled, says it needs to be recovered, so I let it finish loading (I've found that stopping the load will almost always cause C3D to hang indefinitely), close that drawing, then run recover, finds 2 errors, allow to fix, am greeted with the message box "This drawing has been saved by a newer version of C3D. All C3D commands are disabled in this drawing."
Wait a dang minute, SSM crashes and somehow (the save time is still the same as when i manually saved it in 2012) saves it as a C3D2013 file...even though it is still opening as a 2010dwg format file? Opening the file in Notepad even shows it was last saved in 2012.
A client has sent me files created in a version newer than CS5. When I import them and the PDF objects are re-interpreted I get an error message that, during "An unknown imaging construct was encountered." The resulting images have gradients that are extremely bandedb - though I do not know if this is atributable to the error.
The client insists that he is a highly-experienced Illustrator guru, his files are perfect and he will not change them in any way. He has also delcared that it is quite impossible (for him) to convert his artwork to TIFF files. I am able to do this with the files he has provided quite easily, and do not understand what his issue(s) might be.
Assuming that I am the weak link in the chain, what can I do to improve the quality of his images with the software - CS5 - I have?
Running inventor 2010, Installed 2012 to get myself acquainted with the program before totally making the switch, In an assembly everytime I constrain something, or move it it gives me this error. Also I cannot bring this assembly into a drawing because of unresolved issues, yet i have fixed all resolved issues. I would like to get the ribbon platform down before I uninstall inventor 2010...any possibilities
I am a student right now and I am taking a class to learn how to use my new DSLR. I will probably never be a professional photographer but plan on avidly pursuing this hobby. I was thinking of purchasing an academic version of Photoshop CS3.
My question is: When a new version of photoshop comes out (for example CS4) will I be able to purchase the upgrade version if I own the academic version of cs3 or will I have to purchase the full version?
Whenever anyone at the company tries to open a model that has a decal part in it, the File Edit window comes up asking if the person wants to check out the part. As decals generally never change after they are created, they are never desired to be checked out. After saying no to check out, the window then reappears stating that the local is never than the vault, even though you just finished a Get operation. Is there anyway to keep these files from needed constant updating?
We are on ACA 2011 and created a ceiling plan. Sent it to a consultant that is on ACA 2013.The file was saved down, but when we try to make a new ceiling or copy an existing grid, we get the following:
Command: _AecCeilingGridAdd.
Command not allowed because drawing contains objects from a newer version of this application.
My AutoCAD 2013 crashed and as a result the recovered file was saved in 2013 format, instead of my automatic save profile option version set to AutoCAD 2000.
As we have other users in the office without AutoCAD 2013, how do i change the default crash save to a newer version (ie. AutoCAD 2000)?
after upgrading to version 14.1 CC, Photoshop shows several CMD windows during load. It stops on the third one, showing this:
Finally, a pop-up error windows says clc.exe stopped working (you can see that on the photo). I'm running on Windows 7, 64 bit.
The crash message reports this:
Firma con problemas: Nombre del evento de problema: APPCRASH Nombre de la aplicación: clc.exe Versión de la aplicación: 0.0.0.0 Marca de tiempo de la aplicación: 4c5cc9f6 Nombre del módulo con errores: clc.exe Versión del módulo con errores: 0.0.0.0 Marca de tiempo del módulo con errores: 4c5cc9f6 Código de excepción: c0000005 Desplazamiento de excepción: 000000000000a620 Versión del sistema operativo: 6.1.7601.2.1.0.768.3 Id. de configuración regional: 2058 Información adicional 1: e945 Información adicional 2: e9453ece61423ab98d0ee5bd40bdd8d2 Información adicional 3: be9a Información adicional 4: be9a4f994c98c3a8aa1b5294bf419e15
Everything worked just fine before the update. Problems started right after upgrading.
I have PSE 11 and have turned off my firewalls and still cannot get a Camera Raw update newer than 7.1. I have a d600 and it wont work through that. I know it can be done since I wasnt having this problem before I had to restore my computer and reload my software. I have searched Adobe up and down and everything says to us Help>updates...but its not giving me the option to update.
I have PS CS3 on a older laptop. I have been trying to download the disk on a newer laptop. I keep getting Setup has encountered an error and cannot continue. Internal error 2739. how to get the program downloaded?
I installed the retina display-optimized update to my purchased (non-Creative Cloud) version of Photoshop Design Standard (via the Adobe Updater app that pops up in my menu bar only when updates are available), but now when Photoshop launches, I get Photoshop Extended (and it's a trial version). Is this a known issue? Will I need to reinstall Photoshop?
I updated CS4 (student version) to CS5.5 commercial version. The brushes, patterns, shapes and styles I had installed in the CS4 Photoshop version were not loaded into the new version. I no longer have the original files of these assets (or customizations).
After the installation of Photoshop Elements 11 and Premiere Elements 11 on my new system, the catalogs of version 10 do not appear for the conversion to version 11; my 2 catalogs are installed on a LACIE-2BIG NAS system.
Elements Organizer 11.0.0.0 Version principale : 11.0 (20120830.r.32025)
I have been working on a template (.DWT) for Civil3D 2012. I decided to continue my work recently with a newer vesion C3d 2013, and to my shock there seems to be no way at all to transfer my newer settings (I.E.: default layering, default data bands, newer CODECS, etc to the C3d 2012 version. This is about a week's worth of work that I will have to replicate manually to C3d 2012. I cannot believe that the 2 versions are this completely incompatable.
I'm trying to work in some drawings that we got from another employee working in a different office using Civil. When I open the drawing, I get a message that says:
This drawing contains newer versions of objects
To work with the newer objects in a limited fashion, enable proxy graphics and then resave the drawings in the current version. You can also export the drawing to AutoCAD; however, be aware this permanently converts AEC objects to basic AutoCAD objects.
I tried typing in PROXYGRAPHICS and turning it to 0, then resaved it and closed it. When I opened it again, it still gives me the same message. I had the person that sent us the drawings resave it to different versions of AutoCAD. I still get the message.
The biggest problem I'm having with these drawings is that the units are set incorrectly for our use. They are set to civil standards. Like, when I xref in our titleblock, it comes in as being 3 inches long instead of 3 feet long. When I type in UNITS into the command line to change them, I get the message: Command not allowed because drawing contains objects from a newer version of this application. I tried usnig the -EXPORTTOAUTOCAD command, but I get the same message.
I'm thinking about switching to the DNG-Format for the RAW-Files taken with the Fuji X-E1.
When the initial RAW-Conversion for this file type was recently replaced by a much better one, my RAW-Files were automatically updated. I wonder if this would also have happened if I had saved my RAWs under the DNG-format.
Or, in other words, does a DNG include all the data from the original RAW allowing it to be reprocessed when a better technology is available ?
I've got the following problem: I've created some files in older version No. 12. The file contains just rectangles, some simple text and pasted photos... When I install the newer version either X4 or X5, the all photos and other object start blinking and I cannot do anything with them at all... But I can see them just after I zoom in to male everything very large...
on newer drawings ( amonth or two old) my crosshairs disappear in paper space (model space is fine)....but on older drawings (some are years old) the crosshairs works fine. neither the older or newer drawings were started by me so i can;t be sure of how they were set up, but (i think) it must have something to do with the way these newer dwgs were set up.
i was using C3D 2011 when the issu started and upgraded to C3D 2013 and i still have the issue. I've loaded the latest service pack but no change.
C3D 2013 windows 7 pro service pack 1 64 bit intel xeon 3.07 ghz 12 gb ram
Does Lightroom 3.6 have problem with file recognition from newer camera models? In my case does not recognize any of my raw photographs taken with Canon G1X
