AutoCAD Architecture :: This Drawing Contains Newer Versions Of Objects
Feb 15, 2013
I'm trying to work in some drawings that we got from another employee working in a different office using Civil. When I open the drawing, I get a message that says:
This drawing contains newer versions of objects
To work with the newer objects in a limited fashion, enable proxy graphics and then resave the drawings in the current version. You can also export the drawing to AutoCAD; however, be aware this permanently converts AEC objects to basic AutoCAD objects.
I tried typing in PROXYGRAPHICS and turning it to 0, then resaved it and closed it. When I opened it again, it still gives me the same message. I had the person that sent us the drawings resave it to different versions of AutoCAD. I still get the message.
The biggest problem I'm having with these drawings is that the units are set incorrectly for our use. They are set to civil standards. Like, when I xref in our titleblock, it comes in as being 3 inches long instead of 3 feet long. When I type in UNITS into the command line to change them, I get the message: Command not allowed because drawing contains objects from a newer version of this application. I tried usnig the -EXPORTTOAUTOCAD command, but I get the same message.
We are on ACA 2011 and created a ceiling plan. Sent it to a consultant that is on ACA 2013.The file was saved down, but when we try to make a new ceiling or copy an existing grid, we get the following:
Command: _AecCeilingGridAdd.
Command not allowed because drawing contains objects from a newer version of this application.
I've got the following problem: I've created some files in older version No. 12. The file contains just rectangles, some simple text and pasted photos... When I install the newer version either X4 or X5, the all photos and other object start blinking and I cannot do anything with them at all... But I can see them just after I zoom in to male everything very large...
ACA 2013: How to get the 'One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created' why this is coming up?
On a large 2012 drawing, suddenly the entire drawing is half tone and every object is locked. When you try to select an object, the little lock symbol apprears next to the cursor. I must have done something inadvertantly to lock the entire drawing, but I can not find any command or reference to unlock the drawing. This problem is also unique to this drawing.
I have a drawing done in AutoCAD Architecture 2013. Most of it is just lines, but I have a couple of Walls with Doors. It looks fine in the base drawing but when I xref into another file the walls revert to their original color and the doors have disappeared. The opening is there but no door.
I tried xredit and the doors are there but when I close that they are gone again. Tried detaching and reattaching...still have the problem.
After I posted this tried Display Configuration. Clicking all options for Doors gives me the doors...in a closed position, not the same as in the base plan.
I have three drawing constructs.I have door tags and room tags. I have schedules. All work just fine. However, I need to combine all three Finish and all three Door schedules into one multi-level schedule for each, doors and finishes. In views, I schedule the external references by selecting the YES option in the properties dialog box. The problem is that the drawing contains doors and spaces that I do not want to be part of the schedule. How do I deselect the objects that I want to be in the schedule?
The other problem is I can only select one drawing. It makes no sense to have separate schedules for each floor on a small project where there are only 10-20 rooms. As a work around I can create the schedules in constructs, import all the constructs into a view, clip all the constructs and the stitch the tables together. This is cumbersome, does not update seamlessly and results in unnecessary file sizes.
What I have is a nice production drawing, that has NEVER even been opened in C3D2013. I JUST finished adding labels for some new pipes and structures that are in an Xref. I saved the drawing and closed it to work on a different project while plotting. In SSM, I select the sheets to Publish, the first 4 plot without issue, then I get a CER without a Fatal Error...I can still work on the nbow current drawing...it appears that SSM crashed while loading the aforementioned sheet I had been working on.I close everything down, restart C3D2012, open the same drawing I had just labeled, says it needs to be recovered, so I let it finish loading (I've found that stopping the load will almost always cause C3D to hang indefinitely), close that drawing, then run recover, finds 2 errors, allow to fix, am greeted with the message box "This drawing has been saved by a newer version of C3D. All C3D commands are disabled in this drawing."
Wait a dang minute, SSM crashes and somehow (the save time is still the same as when i manually saved it in 2012) saves it as a C3D2013 file...even though it is still opening as a 2010dwg format file? Opening the file in Notepad even shows it was last saved in 2012.
Can prior versions of inventor access current versions of vault?As in, can Inventor 2010 access vault 2013? Or does it have inventor 2013 and vault 2013?
I get the message "One or more objects cannot be saved to the specified format" when using Architecture 2011 and 2012. My other other machines running the same software have no problem. Have purged and audited but it still does it.
I am currently working on a project with an architect and I have some elevations that are in the current floor plan sheet. During the last project review he wants to move them off the floor plan sheet and onto another sheet. No Problem. However when i went back to regenerate the elevation to copy to another sheet, I noticed that there were a flashing boxes where the old elevations were. Is there something there that needs to be purged somehow. I tried using the purge command and they are still there.
I do not know what has changed but the select objects works differently now. For example, when 3 lines are drawn and the erase command is selected. I do a crossing window and the command line says 3 objects selected. But when I do it again and only select 2 lines, it says 2 objects selected and the 3rd line is then unselected. It used to say 2 objects selected and ignore but the total was 3.
my OS is Vista 64bit. i was using ACA2008 SP1 without any problems about a year.i decided to uninstall it and start using ACA2009.i have uninstalled ACA2008, 3dsmax2008 and other autodesk apps and removed some folders 'autodesk' and 'autodesk shared' from vista system folders.i also delete 'autodesk' from registry (LocalMachine/Software & CurrentUser/Software).then i installed ACA2009 64bit without any problems. after install i start it and there wasn't any problems (but i do not use any AEC objects, so i don't know if they was working).next i installed 3dsmax2009 & sp1 for it. max worked OK.then i installed sp1 for ACA2009. instalation was OK... but when i start working on a project i realised that AEC objects (wall,door, etc.) dont work at all ACA2009 starts OK without any warning or something...it loads at startup AECarchBase (and other AEC related stuff) but when you are trying to use any of wall,door,window it does do nothing... for example when you select wall from tools pallete it shows command 'WallAdd' in command line and then wall command ends without any warning or something...it also doesn't work from command line or menu the strange thing is when i uninstall ACA2009 and install ACA2008 again problem was also now in ACA2008 !!!
I am experiencing this very compromising situation.. i am starting to get out of breath literaly. I am trying to save my 3D but cad say to me some objects cannot be save into specified format.
Then No save.I am trying to find a way to identify these objects..
Soms of the objects in my 3D view "disappear" when clicking on it. The edges are still visible while the rest of the objects get invisible. This is only the case for some objects in my 3D view. I have no problem with the visibility of the objects in the structural plans or elsewhere. How can I make all objects visible in 3D again when clicking on them?
I used architecture on my pc. I installed Autocad on another pc with the same Serial code. I can see on the top that my version suddenly is a Educational version. I'm telling you this because i don't know if this is the reason of my problem.
The problem: i can't see the properties of an object when i use autocad architecture in the educational version.
For example: I make a wall and i place a window in the wall. Now i want to change the width of my window, using the properties bar. SO i click on my window (right mouse button) and click on PROPERTIES. It opens the properties bar BUT i can't see the window and his properties. At the top of the properties bar it says "No selection".. How can this be when i begin with the right mouse click on my window?
When i do it in the other direction: Open properties (ctrl+1) first and then select for example my wall, still nothing changes in the properties bar!
I produced some objects in Inventor 2013 and exported to DWG to be assembled in AutoCAD 2013. All is fine except when i look at the objects in a 'hidden' view these weird diagonal lines appear over the objects. I am unable to clcik these but when i zoom in they gradually disappear but. If I try to plot the object as shown these lines are printed. This also happens when saving to pdf.
So, I extract elevations from my model. No prob. Works perfectly. I then often edit linework to change some linework colors...works fine. However, What if I want to change/edit a Hatch? When I click on 'Edit Linework', the hatch automatically turns off to allow me to edit the linework... Can one edit the Hatching?
I used to have a third party plugin that had a "clone" command.
It was like "Add Selcted" & keep matching the properies for more new objects. So new objects would match the layer, linetype, etc.of what was previosly selected Not just the once.
We are trying to create a set of palettes for a building type that we specialize in. How do we add the spaces to a design palette and can we include a room tag with it?
The best way to have normal AutoCAD objects (lines, plines, arcs) adhere to the Display Configurations.
My original idea was to contain all of the 'vanilla linework' in one Multi-View Block per Construct, thereby enabling me to set the Display Properties for that MVB and have the linework show/hide depending on my Display Config. I end up having to 'edit block in-place' if I want to change anything, which seems to work but there has got to be a better way.
My only other idea was to somehow link Layer Filters (which I'm unfamiliar with, and probably using the wrong term) to the Display Configs so that depending on the current Config, certain layers would be frozen/thawed. This seems like the way to do it, but it is not obvious to me how I might be able to achieve this through the Display Manager.
We model the building using AEC steel members in AutoCAD ACA. When the piping group xrefs our model into their model (in regular AutoCAD) to add their pipe, the AEC steel behaves properly in model space, but when they go to dimension in paperspace (for example from the center of their pipe to the face of a column) osnap does not recognize the AEC steel geometry.
OLE objects does not plot in color. The OLE object is in a title block that its being reference to the working drawing. Is the are referencing setting we can manipulate to resolve this issue?
When an object in an XRef is tagged (and the object has an object based PSD) the tag will not update to reflect changes made in the XRef.
This can be fixed in the XRef by running the PropertyDataBrowser command and unticking the Overrides (shown in the leftmost tickbox when two tick boxes present).
Any automatic way to keep the tags up to date? I have attached my VB.Net code attempt for this. It almost works BUT the MultiViewBlock Overrides are ReadOnly.
Walls are being created on layer A-Wall, in color Cyan, Lineweight .020, etc. I'd like to edit those layer properties. There must be a matrix somewhere that shows a list of all of the Architectural Objects, the layer that each object will be created on, and the properties of those layers. Where in ACA2008 have they hidden this top-secret matrix? I've accessed Layer Key Styles via about 6 different routes, and nowhere do I find a list of Objects. I see that I could define an override for every component of a Wall object in the Style Manager / Display Properties, but it sure would be easier to just change the layer color once, wherever that's defined. There is only one Layer Key Style accessible through Style Manager, and layer A-Wall doesn't appear in that manager- layers A-Wall-Abov, A-Wall-Blow, etc appear, but not A-Wall. Neither does layer A-Glaz, which is where Window objects are placed.
How does a Wall object know to place itself on layer A-Wall, and where are the properties of layer A-Wall defined?
We have a house plan that has windows and doors of different types anchored to their walls. It seems that whenever someone is working in a file from the network that has the plan xrefed into it and the plan is opened to be modified by another user the windows and doors randomly detach from the walls. We're getting tired of going back in and reanchoring them.
We experienced a problem. we have a drawing file, is about 1.6meg not big. while working in model space doing some 3D work, all of a sudden all the objects dissapear except for some text. all layers are on and thawed. we regen all, zoom all. weird thing is when we go into the paper space tabs everything shows up. so all the data is there some place but cant find it in model space.
there are no xrefs in the drawings and i had cleaned all the multiple copies out before to keep the file size down and more workable. this is happening on two machines. other drawings are fine.
