I am experiencing this very compromising situation.. i am starting to get out of breath literaly. I am trying to save my 3D but cad say to me some objects cannot be save into specified format.
Then No save.I am trying to find a way to identify these objects..
How to identify and delete overlapping objects. For example one polyline has been pasted double time, with in common reference point.
View 3 Replies View RelatedSome of my artboards use the color yellow to highlight selected objects. Can I change that?
View 2 Replies View RelatedI can not find the tcircle command
View 2 Replies View RelatedI would like to know how i can find the good scale for hatch. Is there an other mean to find by aleatory ?
View 4 Replies View RelatedWhere do I find Content Explorer? Is it the same as Content Browser?
View 1 Replies View Relatedi have lost a file and cannot find it anywhere on c drive. where can it be stored.?
View 1 Replies View Relatedsomehow i got zoomed way out in paperspace and can't find my objects, how do i get back to centered over those?
View 9 Replies View RelatedI'm working on a routine to find orphaned objects in .idw files. So far, I've found it relatively simple to find orphaned dimensions, balloons, surface texture symbols and centerlines/marks, but I'm having trouble with leaders (such as for tapped holes, etc.) and weld symbols.
I've tried iterating through a drawing's SketchedSymbols collection, but it seems that this collection always has zero size, and unlike the items I've been successful with so far, I cannot find a specific collection for those items either within the sheet or drawingview objects.
I'm still bouncing back and forth from 2008 LDD and 2010 3D.
I can't seem to find inquiry station offset objects or something like inverse to line.
Do have to create alignments for these simple calculations.
Land Desktop 2009 Civil 3D Companion
When I issue the Wblock Command I can not find the Dialog box to select objects and file location... This happens in the Layer Dialog when I try to change the color of a layer, the Color Dialog box can not be found. When I use the Block command the dialog box pops up, so I can see it.
fildia>1
cmddia>1
attdia>0
I get the message "One or more objects cannot be saved to the specified format" when using Architecture 2011 and 2012. My other other machines running the same software have no problem. Have purged and audited but it still does it.
View 5 Replies View RelatedI am currently working on a project with an architect and I have some elevations that are in the current floor plan sheet. During the last project review he wants to move them off the floor plan sheet and onto another sheet. No Problem. However when i went back to regenerate the elevation to copy to another sheet, I noticed that there were a flashing boxes where the old elevations were. Is there something there that needs to be purged somehow. I tried using the purge command and they are still there.
View 1 Replies View RelatedI do not know what has changed but the select objects works differently now. For example, when 3 lines are drawn and the erase command is selected. I do a crossing window and the command line says 3 objects selected. But when I do it again and only select 2 lines, it says 2 objects selected and the 3rd line is then unselected. It used to say 2 objects selected and ignore but the total was 3.
View 1 Replies View Relatedmy OS is Vista 64bit. i was using ACA2008 SP1 without any problems about a year.i decided to uninstall it and start using ACA2009.i have uninstalled ACA2008, 3dsmax2008 and other autodesk apps and removed some folders 'autodesk' and 'autodesk shared' from vista system folders.i also delete 'autodesk' from registry (LocalMachine/Software & CurrentUser/Software).then i installed ACA2009 64bit without any problems. after install i start it and there wasn't any problems (but i do not use any AEC objects, so i don't know if they was working).next i installed 3dsmax2009 & sp1 for it. max worked OK.then i installed sp1 for ACA2009. instalation was OK... but when i start working on a project i realised that AEC objects (wall,door, etc.) dont work at all ACA2009 starts OK without any warning or something...it loads at startup AECarchBase (and other AEC related stuff) but when you are trying to use any of wall,door,window it does do nothing... for example when you select wall from tools pallete it shows command 'WallAdd' in command line and then wall command ends without any warning or something...it also doesn't work from command line or menu the strange thing is when i uninstall ACA2009 and install ACA2008 again problem was also now in ACA2008 !!!
View 9 Replies View RelatedAre Layer Keys only for ACA objects ?
for example:
I'd like my dimensions to be all on layer "D" in the color red.
I added "dimlinear" to the key style. but it just draws dimensions on the current layer.
ACA 2013: How to get the 'One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created' why this is coming up?
View 1 Replies View RelatedSoms of the objects in my 3D view "disappear" when clicking on it. The edges are still visible while the rest of the objects get invisible. This is only the case for some objects in my 3D view. I have no problem with the visibility of the objects in the structural plans or elsewhere. How can I make all objects visible in 3D again when clicking on them?
View 3 Replies View RelatedI used architecture on my pc. I installed Autocad on another pc with the same Serial code. I can see on the top that my version suddenly is a Educational version. I'm telling you this because i don't know if this is the reason of my problem.
The problem: i can't see the properties of an object when i use autocad architecture in the educational version.
For example: I make a wall and i place a window in the wall. Now i want to change the width of my window, using the properties bar. SO i click on my window (right mouse button) and click on PROPERTIES. It opens the properties bar BUT i can't see the window and his properties. At the top of the properties bar it says "No selection".. How can this be when i begin with the right mouse click on my window?
When i do it in the other direction: Open properties (ctrl+1) first and then select for example my wall, still nothing changes in the properties bar!
I produced some objects in Inventor 2013 and exported to DWG to be assembled in AutoCAD 2013. All is fine except when i look at the objects in a 'hidden' view these weird diagonal lines appear over the objects. I am unable to clcik these but when i zoom in they gradually disappear but. If I try to plot the object as shown these lines are printed. This also happens when saving to pdf.
View 2 Replies View RelatedOn a large 2012 drawing, suddenly the entire drawing is half tone and every object is locked. When you try to select an object, the little lock symbol apprears next to the cursor. I must have done something inadvertantly to lock the entire drawing, but I can not find any command or reference to unlock the drawing. This problem is also unique to this drawing.
View 4 Replies View RelatedACA 2011
So, I extract elevations from my model. No prob. Works perfectly. I then often edit linework to change some linework colors...works fine. However, What if I want to change/edit a Hatch? When I click on 'Edit Linework', the hatch automatically turns off to allow me to edit the linework... Can one edit the Hatching?
I used to have a third party plugin that had a "clone" command.
It was like "Add Selcted" & keep matching the properies for more new objects. So new objects would match the layer, linetype, etc.of what was previosly selected Not just the once.
Is there a command like this in ACA 2012 ?
We are trying to create a set of palettes for a building type that we specialize in. How do we add the spaces to a design palette and can we include a room tag with it?
View 1 Replies View RelatedThe best way to have normal AutoCAD objects (lines, plines, arcs) adhere to the Display Configurations.
My original idea was to contain all of the 'vanilla linework' in one Multi-View Block per Construct, thereby enabling me to set the Display Properties for that MVB and have the linework show/hide depending on my Display Config. I end up having to 'edit block in-place' if I want to change anything, which seems to work but there has got to be a better way.
My only other idea was to somehow link Layer Filters (which I'm unfamiliar with, and probably using the wrong term) to the Display Configs so that depending on the current Config, certain layers would be frozen/thawed. This seems like the way to do it, but it is not obvious to me how I might be able to achieve this through the Display Manager.
We model the building using AEC steel members in AutoCAD ACA. When the piping group xrefs our model into their model (in regular AutoCAD) to add their pipe, the AEC steel behaves properly in model space, but when they go to dimension in paperspace (for example from the center of their pipe to the face of a column) osnap does not recognize the AEC steel geometry.
View 3 Replies View RelatedI'm trying to work in some drawings that we got from another employee working in a different office using Civil. When I open the drawing, I get a message that says:
This drawing contains newer versions of objects
To work with the newer objects in a limited fashion, enable proxy graphics and then resave the drawings in the current version. You can also export the drawing to AutoCAD; however, be aware this permanently converts AEC objects to basic AutoCAD objects.
I tried typing in PROXYGRAPHICS and turning it to 0, then resaved it and closed it. When I opened it again, it still gives me the same message. I had the person that sent us the drawings resave it to different versions of AutoCAD. I still get the message.
The biggest problem I'm having with these drawings is that the units are set incorrectly for our use. They are set to civil standards. Like, when I xref in our titleblock, it comes in as being 3 inches long instead of 3 feet long. When I type in UNITS into the command line to change them, I get the message: Command not allowed because drawing contains objects from a newer version of this application. I tried usnig the -EXPORTTOAUTOCAD command, but I get the same message.
I have a drawing done in AutoCAD Architecture 2013. Most of it is just lines, but I have a couple of Walls with Doors. It looks fine in the base drawing but when I xref into another file the walls revert to their original color and the doors have disappeared. The opening is there but no door.
I tried xredit and the doors are there but when I close that they are gone again. Tried detaching and reattaching...still have the problem.
After I posted this tried Display Configuration. Clicking all options for Doors gives me the doors...in a closed position, not the same as in the base plan.
When using the design pallette tool bar, my objects will not insert into the selected surface? Reasons Why?
View 2 Replies View RelatedOLE objects does not plot in color. The OLE object is in a title block that its being reference to the working drawing. Is the are referencing setting we can manipulate to resolve this issue?
View 1 Replies View RelatedI am getting an err message "unable to execute the tool .class not registered" while trying to insert objects from the tool pallette.
View 9 Replies View Related