AutoCAD Inventor :: Can Project Number Be Assigned To Project File
May 6, 2013Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies
ADVERTISEMENT
AutoCAD 2010 :: Project Browser - Create New With Project Number Prompt?
May 14, 2012How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
AutoCAD 2013 :: Project Navigator - Change Project Number
Jul 17, 2013I have to set up a project in Navigator so we can get started on it but I will have to go back and change the project number when we get it.
My question is how do I change the project no so that it re paths everything and reorganizes itself numerically in Windows Explorer...or should I just create a new project in Navigator and copy the files I need into the new project?
AutoCAD Inventor :: Getting Part Number Value From IProperties Project Tab?
Feb 26, 2013Is there a api to read part number value in properties "Project Tab" for a drawing document?
View 2 Replies View RelatedRevit :: Assigned Levels Not Showing In Project Browser
Jan 29, 2014In starting a new project, I renamed "Level 1" to "Street Level" and "Level 2" to "Level 1". Next I added two additional levels in the drawing, "Level 2" and "Level 3".
My Project Browser shows only Level 1, Site, and Street. Why do the Levels 2 and 3 not show under and how can I get them to.
Revit :: New Project File - Setting That Controls Next Available Room Number
Jun 28, 2013We were updating the wall finish schedule in our template. Now using the template, if we create a new room, it's number is 3. Where is the setting that controls what the next available room number is?
View 2 Replies View RelatedVideoStudio :: Create Smart Package From Project File That Has Smaller Component Project Files?
Aug 22, 2011I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
AutoCAD Inventor :: Add Non Project Files To Project?
Dec 12, 2011I do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
View 1 Replies View RelatedAutoCAD Inventor :: Project File Structure
Mar 14, 2013As a new Inventor user I wanted to get some insight and pointers on good practices for Project Files and their structure while using a stand alone Inventor seat with no Vault I am a single user at our company and just upgraded to Inventor. I have been using Solid Works for years and things are a little different.
View 9 Replies View RelatedAutoCAD Inventor :: Change The Project File
Aug 13, 2013How can we change(open) the Project file(ipj) with inventor api using vb.net code?
View 3 Replies View RelatedAutoCAD Inventor :: Master Project File
May 30, 2012I was making some changes the other day to the parts list settings inside of the styles editor and discovered that this involved needing to make the master project file a read/write condition. I was starting to get into uncharted territory at this point, but was proceeding with caution. So I went into my vault working folder in windows explorer and RC'd on the MPF and changed it to read/write. I made my BOM changes and life seemed to be good on the heals of a long holiday weekend. I changed the properties of the MPF back to read only and I thought things were fine.
Until yesterday when I started getting this message. This shows up every time I open and check out a file from Vault. Plus it also changes my MPF on my local drive back to read/write. I am also starting to get this error message when I start a new drawing file as well.
AutoCAD Inventor :: Add File Location To Project
Feb 10, 2012I'm working on creating iparts for fasteners. Initially I had the O.D. of all the fasteners as nominal, which created an issue when using analyze interference. All hole features are based on the minor diameter, so they are displayed correctly on the .idw. Nominal fasteners with minor diameter holes means interference.
I am currently referencing the thread.xls spreadsheet, located in the Inventor Design Data folder, within my fastener ipart spreadsheet. This allows me to maintain a constant connection to the thread.xls file if there are ever changes from Autodesk.
My issue comes about when I am placing the ipart files within assemblies. I am asked for the location of thread.xls. Once I re-establish the link, Inventor tells me it's not part of the active project. BUT, if you look at the Project - Folder Options - Design Data, it is the same location. So the project does have a link to the folder structure.
Would I have to create a library in each project so the link can be established.
AutoCAD VB :: Get Current Project Number And Drawing By Using Some Vba Code?
May 13, 2011Is that possible to get the current Project number and Drawing by using some vba code?
View 2 Replies View RelatedAutoCAD Architecture :: Tool Palettes Aren't Same In New Project As In Project Template?
Dec 6, 2011I have a Project Template that is used when creating a new project. I noticed that the Tool Palette in the Project Template and the Tool Palette in the new Project are not the same. How do I get the new Projects to pull the same Tool Palettes from the Project Template?
View 2 Replies View RelatedAutoCAD Inventor :: Project File / Different Part Dimensions
Sep 11, 2013I have an assembly of pallet racking, it is one complete frame which can be modified in all the desired ways by the ilogic i have in place. I wish to be able to put this frame into a new assembly but have different dimensions for each frame. I used to do this by copying all the files to a new folder so that each frame had its own parts. This has stopped working and now once one frame is altered all the other frames change to rather than having there own dimensions.
View 1 Replies View RelatedAutoCAD Inventor :: Project File Reverting To Default
Jun 28, 2013One of our employees is having an issue where his project file keeps reverting back to a default setup and his changes are being lost. Is there anyway to prevent this from happening?
View 2 Replies View RelatedAutoCAD Inventor :: Master Project File Switching?
Apr 3, 2012We are having an issue where the master project file that we have created at my company keeps switching back to the default.ipj file randomly. This is causing obviously our template paths as well as other path settings to not be right.
Our VAR told us that this randomly happens. why this is happening or that my VAR is correct in what they said?
AutoCAD Inventor :: Project File Disappearing From Navigation
Mar 13, 2013My company requires us to use two master project files instead of one and my problem is that i can add both .ipj files into the Projects navigator in Inventor and set one as the current project, but as soon as i close the navigation window and reopen it (presumably to switch to the other project) the project that is not the active project disappears from the navigation window. The .ipj file still exists, it just doesnt show in the navigator and i have to browse to find it again. This problem happens no matter which project i set to be currently active. How can i keep that from happening?
View 8 Replies View RelatedAutoCAD Inventor :: Project File Reverting To Default?
Sep 22, 2009Has seen Inventor randomly reset a users project file from whatever it's set at to Default?
I have a couple of users here that for whatever reason have a habit of closing out Inventor everytime they want to close out one file and open another...yes, if they work on 10 files in one day, they've opened and closed Inventor 10 times...i.e. open, close, open, close, etc.
I've seen the project file reset happen on thier stations only thusfar.
Inventor 2010
AutoCAD Inventor :: Project File Keeps Switching To Default?
Sep 25, 2012I run inventor with Vault. I have a project file set up in my vault directory. Each time I close everything and restart my computer inventor switches the Project back to default. I have deleted every .ipj I could find. Below is a screen shot of what I see every morning. It should be on vault but it is not. If I start by checking out a file from vault it checks it back in because the .IPJ is not set in inventor.
View 6 Replies View RelatedAutoCAD Inventor :: Set-up A Project File That Can Easily Open Drawings
Nov 30, 2011set-up a project file that I can easily open my drawings and be able to share with others?I have lost several drawings and time because I have not been able to open my drawings.
View 1 Replies View RelatedAutoCAD Inventor :: Duplicating Vault Project And Renaming Every Related File
May 20, 2013I want to duplicate & then rename a project I have stored on my vault computer, However I am experiencing many difficulties.
There are probably around 1000 + files in this project-multiple assemblies/drawings & parts. Initially i did a Pack & Go of the Project to my desktop. I then took my first top level drawings & using Design Assistant renamed all the reference parts and assemblies related too it. This worked fine, albeit a very long time to rename all the files.
The problem is that i have say 50 drawing files, some contain similar assemblies/part files which will have already been rename in the first top level drawing & some container different assemblies/parts (which are not related to the first top level drawing) & will have to be renamed separately.
Is there an easier way to duplicate & rename a vault project because design assistant makes this task extremely laborious. An great tool to add would be to 'Find & Replace' a file name & apply it too all the files. Similar to the function in Microsoft Word.
I have looked into the copy design feature in vault however, you can only copy a project within a project, you cannot copy it to a completely new folder in the vault.
The other problem is, is that you can only add a prefix or suffix to every file/related part/assembly, & i would rather replace the project number rather then add the new project number to the file names. This would be a viable option if you could rename multiple files quickly, however this just stems back to the design assistant.
AutoCAD Inventor :: Active Project File Changes Randomly On Different Users Machines
Mar 19, 2013We have had this issue now for a couple years and don't know what is causing it. We are using vault pro with admin set single project file. A user can work for months using correct.ipj, then randomly at 10:42 they will notice the active project was been changed to some other temporary project location "c: emp.....". Then it will happen to different users at different times. I cant seem to find any correlation to anything. I can only imagine that it is somehow triggered from the vault addin.
We are inventor 1012 and vault 2012 pro.
AutoCAD Inventor :: Project File Changes Related To Switch Local CC Libraries
Mar 24, 2012For the last few years I had my content center libraries running as part of the vault server. I have not made any customizations.
I want to try to have the content center libraries on my local machine to see if that speeds things up.
Is that possible while still using the vault server for our regular data?
Do I need to make any changes to my project file?
IV210 Professional Suite
AutoCAD Inventor :: Custom Title Block Properties Based On Project File?
Mar 21, 2013As I am creating drawings for parts/assemblies, I have to fill out the customers name and the job number which I currently do on every drawing I create by right clicking on the Drawing name in the tree, going to iProperties, and then filling out the fields I need.
I have to do this for every sheet. Sometimes over 100 sheets per job.
Is there a way, within the project file maybe, to have these fields be already filled in with the customers name and job number?
Every new project file I make is a new customer. So I'm wondering if there is someway to tweak the project file.
AutoCAD Inventor :: 2012 Task Scheduler Won't Support Vault Project File
Mar 29, 2012I tried to use 2012 task scheduler to migrate files, got an error message saying it won't support vault project file. I used vault project file for version 2010.
View 1 Replies View RelatedAfter Effects :: How To Find Number Of Keyframes And / Or Layers Used In A Project
Sep 12, 2013how many keyframes and layers I ended up using. Does AE have any kind of function for getting this info?
View 1 Replies View RelatedPhotoshop :: Project Doesn't Retain Transparency When Imported Into Another Project
Mar 12, 2012I'm having issues with importing an image I created in photoshop that has a background transparency into another photoshop project. The part of the image that should be invisible, is not.
View 5 Replies View RelatedRevit :: Custom Railing Insert Project To Project
Sep 9, 2011I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
Premiere Pro :: Importing / Transferring Sequences From Project To Project?
Jan 13, 2014I want to take a sequence that I had in an old project and put it into a current project, but I dont want it to be one rendered file... i still want too see the fades and make changes to it...
View 5 Replies View RelatedPremiere Pro :: Corrupted CS6 Project / Cannot Load Project
Jan 2, 2014i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
View 2 Replies View Related