AutoCAD Inventor :: Project File / Different Part Dimensions
Sep 11, 2013
I have an assembly of pallet racking, it is one complete frame which can be modified in all the desired ways by the ilogic i have in place. I wish to be able to put this frame into a new assembly but have different dimensions for each frame. I used to do this by copying all the files to a new folder so that each frame had its own parts. This has stopped working and now once one frame is altered all the other frames change to rather than having there own dimensions.
I received a stp.file from a vendor and need to add shrink to the file. How do edit the file? Also, once the shrink is added I need to be able to make a split mold out of the part. How would I go about do that? I should be able to make a block; then cut the part out of the block. Is that correct?
I´m trying to measure the base dimensions of simple geometric shapes. I started out with plates since they are easy to measure as long as they sit in 90°, 180° and 270° positions relative to the origin. Then Measure.ExtentsLength, Measure.ExtentsWidth and Measure.ExtentsHeight will give me the base dimensions of a plate.
However, if the plate sits abitrary relative to origin this will obviously fail, since Measure.Extents only measures in x,y,z
Is there any way how I get positions of the geometry that is in the part, like corners surfaces on the B-REP so I can calculate the dimensions properly for a plate. I´m not sure if this is possible with iLogic. I have a strong suspicion VB.net would be needed for this.
Another problem I have is that derived parts don´t get triggered to run a script when I change the geometry in the Multibody Part and the rule is set to run by any modelgeometry change.
I'm looking for an easy way to extract the information of max box dimensions (X, Y, Z).
When we want to send one part, or assembly all over the world, we need those dimension. I think, it is something that inventor already have it but not in an easy way like a phisical propertie that you can include in your BOM. Is this something for autodesk to implement?
When I try to scale a part in Autodesk Inventor Fusion, it asks to select a solid body, and reference point, but there is no option to change the scaling type to nonuniform. How to do it? I have Autodesk Inventor and Autodesk Inventor Fusion 2013.
I'm making a part and am adding features to it and using my existing sketch dimensions as my guide. The problem is that when there are sketch dimensions on the face of the part, they are difficult to read. I'm forever dragging these dims to the side in order to read them, it's just a bit annoying. I was wonering if there was a setting that made them show up as well as they do when the aren't sitting on the face of my parts. I've attached a .jpg of what I'm talking about. notice the dimension on the left side and the bottom.
I am finally getting time to do some organizational cleanup and management with our templates and vault settings. Many of the things are items that I am altering for each drawing/model I make and I would like to make them "stick" for the company standards. Things like altering font size in the styles library, adding part dimensions to the parameters for the parts list, and creating a new content central library where our part numbers are already populated for the parts list and the structural shapes have datum planes in the middle rather than just at beginning and end.
Inventor Premium 2013 SP1.1 Vault 2013- plain vanilla version HP G71 notebook celeron cpu w 4gb RAM and 64 bit system Win 7 home premium
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
I need converting imperial dimensions into metric in assembly as weell as part level sketches dimensions.
Any solution for converting all imperial dimensions to metric dimensions in whole assembly constraint level and as well as part level sketch dimensions. Any macros or any ilogic rules?
I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
As a new Inventor user I wanted to get some insight and pointers on good practices for Project Files and their structure while using a stand alone Inventor seat with no Vault I am a single user at our company and just upgraded to Inventor. I have been using Solid Works for years and things are a little different.
I was making some changes the other day to the parts list settings inside of the styles editor and discovered that this involved needing to make the master project file a read/write condition. I was starting to get into uncharted territory at this point, but was proceeding with caution. So I went into my vault working folder in windows explorer and RC'd on the MPF and changed it to read/write. I made my BOM changes and life seemed to be good on the heals of a long holiday weekend. I changed the properties of the MPF back to read only and I thought things were fine.
Until yesterday when I started getting this message. This shows up every time I open and check out a file from Vault. Plus it also changes my MPF on my local drive back to read/write. I am also starting to get this error message when I start a new drawing file as well.
I'm working on creating iparts for fasteners. Initially I had the O.D. of all the fasteners as nominal, which created an issue when using analyze interference. All hole features are based on the minor diameter, so they are displayed correctly on the .idw. Nominal fasteners with minor diameter holes means interference.
I am currently referencing the thread.xls spreadsheet, located in the Inventor Design Data folder, within my fastener ipart spreadsheet. This allows me to maintain a constant connection to the thread.xls file if there are ever changes from Autodesk.
My issue comes about when I am placing the ipart files within assemblies. I am asked for the location of thread.xls. Once I re-establish the link, Inventor tells me it's not part of the active project. BUT, if you look at the Project - Folder Options - Design Data, it is the same location. So the project does have a link to the folder structure.
Would I have to create a library in each project so the link can be established.
One of our employees is having an issue where his project file keeps reverting back to a default setup and his changes are being lost. Is there anyway to prevent this from happening?
We are having an issue where the master project file that we have created at my company keeps switching back to the default.ipj file randomly. This is causing obviously our template paths as well as other path settings to not be right.
Our VAR told us that this randomly happens. why this is happening or that my VAR is correct in what they said?
My company requires us to use two master project files instead of one and my problem is that i can add both .ipj files into the Projects navigator in Inventor and set one as the current project, but as soon as i close the navigation window and reopen it (presumably to switch to the other project) the project that is not the active project disappears from the navigation window. The .ipj file still exists, it just doesnt show in the navigator and i have to browse to find it again. This problem happens no matter which project i set to be currently active. How can i keep that from happening?
Has seen Inventor randomly reset a users project file from whatever it's set at to Default?
I have a couple of users here that for whatever reason have a habit of closing out Inventor everytime they want to close out one file and open another...yes, if they work on 10 files in one day, they've opened and closed Inventor 10 times...i.e. open, close, open, close, etc.
I've seen the project file reset happen on thier stations only thusfar.
