We are having an issue where the master project file that we have created at my company keeps switching back to the default.ipj file randomly. This is causing obviously our template paths as well as other path settings to not be right.
Our VAR told us that this randomly happens. why this is happening or that my VAR is correct in what they said?
I was making some changes the other day to the parts list settings inside of the styles editor and discovered that this involved needing to make the master project file a read/write condition. I was starting to get into uncharted territory at this point, but was proceeding with caution. So I went into my vault working folder in windows explorer and RC'd on the MPF and changed it to read/write. I made my BOM changes and life seemed to be good on the heals of a long holiday weekend. I changed the properties of the MPF back to read only and I thought things were fine.
Until yesterday when I started getting this message. This shows up every time I open and check out a file from Vault. Plus it also changes my MPF on my local drive back to read/write. I am also starting to get this error message when I start a new drawing file as well.
I run inventor with Vault. I have a project file set up in my vault directory. Each time I close everything and restart my computer inventor switches the Project back to default. I have deleted every .ipj I could find. Below is a screen shot of what I see every morning. It should be on vault but it is not. If I start by checking out a file from vault it checks it back in because the .IPJ is not set in inventor.
View 6 Replies View RelatedEverytime i switch project files for any reason, Inventors response time to anything gets to the point i have to close the program and open it back up. After the program restart I'm able to use it again, but then when I have to change project files it does the same thing again. It's wasting a lot of time for me and I'd rather not format and reinstall everything.
View 2 Replies View RelatedIs it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies View RelatedJust wondering, if I have several seperate idw files and I want to combine them into one master file, is this possible? Would be handy to have all my drawing on one file instead of the 30 or so seperate ones it will become.
Inventor 2014 PDS
I have an issue with opening assembly files as they always open as Master not Last Active.
Have I missed an option on another tab or something else?
64-Bit Inventor Professional 2012
Build 219, SP2
I have created a parametric, multibody master part file to derive parts from it, and then put them in an assembly. See attached file. Now, I need 3 different versions of this setup (with different values of the parameter 'bending_angle').
What is the best way to do it? If I derive parts from it, they always follow the *actual* status of their master file. Is there some method to do this: "derive from this file, with parameter bending_angle=55deg", but keep the dependency relation, i.e. if I modify something on the master file, the derived part fill follow the modifications (with the value of bending_angle=55deg)
Inventor 2013
In the drawing environment, is it possible to use the same file to show a client (example) option a or option b from the file? Meaning, can I create a separate side by side view in the idw using the same assembly file, but in different suppressed states? Or how does this work specifically? Right now all I have done is saved out the file with the different suppressed state showing, but this became obviously cumbersome quickly since the parts are similar and keep updating, thus forcing me to create yet even more optional files. I'm thinking that iLogic could be a possible fix.
View 1 Replies View RelatedAs a new Inventor user I wanted to get some insight and pointers on good practices for Project Files and their structure while using a stand alone Inventor seat with no Vault I am a single user at our company and just upgraded to Inventor. I have been using Solid Works for years and things are a little different.
View 9 Replies View RelatedHow can we change(open) the Project file(ipj) with inventor api using vb.net code?
View 3 Replies View RelatedI'm working on creating iparts for fasteners. Initially I had the O.D. of all the fasteners as nominal, which created an issue when using analyze interference. All hole features are based on the minor diameter, so they are displayed correctly on the .idw. Nominal fasteners with minor diameter holes means interference.
I am currently referencing the thread.xls spreadsheet, located in the Inventor Design Data folder, within my fastener ipart spreadsheet. This allows me to maintain a constant connection to the thread.xls file if there are ever changes from Autodesk.
My issue comes about when I am placing the ipart files within assemblies. I am asked for the location of thread.xls. Once I re-establish the link, Inventor tells me it's not part of the active project. BUT, if you look at the Project - Folder Options - Design Data, it is the same location. So the project does have a link to the folder structure.
Would I have to create a library in each project so the link can be established.
I have an assembly of pallet racking, it is one complete frame which can be modified in all the desired ways by the ilogic i have in place. I wish to be able to put this frame into a new assembly but have different dimensions for each frame. I used to do this by copying all the files to a new folder so that each frame had its own parts. This has stopped working and now once one frame is altered all the other frames change to rather than having there own dimensions.
View 1 Replies View RelatedOne of our employees is having an issue where his project file keeps reverting back to a default setup and his changes are being lost. Is there anyway to prevent this from happening?
View 2 Replies View RelatedMy company requires us to use two master project files instead of one and my problem is that i can add both .ipj files into the Projects navigator in Inventor and set one as the current project, but as soon as i close the navigation window and reopen it (presumably to switch to the other project) the project that is not the active project disappears from the navigation window. The .ipj file still exists, it just doesnt show in the navigator and i have to browse to find it again. This problem happens no matter which project i set to be currently active. How can i keep that from happening?
View 8 Replies View RelatedHas seen Inventor randomly reset a users project file from whatever it's set at to Default?
I have a couple of users here that for whatever reason have a habit of closing out Inventor everytime they want to close out one file and open another...yes, if they work on 10 files in one day, they've opened and closed Inventor 10 times...i.e. open, close, open, close, etc.
I've seen the project file reset happen on thier stations only thusfar.
Inventor 2010
set-up a project file that I can easily open my drawings and be able to share with others?I have lost several drawings and time because I have not been able to open my drawings.
View 1 Replies View RelatedI want to duplicate & then rename a project I have stored on my vault computer, However I am experiencing many difficulties.
There are probably around 1000 + files in this project-multiple assemblies/drawings & parts. Initially i did a Pack & Go of the Project to my desktop. I then took my first top level drawings & using Design Assistant renamed all the reference parts and assemblies related too it. This worked fine, albeit a very long time to rename all the files.
The problem is that i have say 50 drawing files, some contain similar assemblies/part files which will have already been rename in the first top level drawing & some container different assemblies/parts (which are not related to the first top level drawing) & will have to be renamed separately.
Is there an easier way to duplicate & rename a vault project because design assistant makes this task extremely laborious. An great tool to add would be to 'Find & Replace' a file name & apply it too all the files. Similar to the function in Microsoft Word.
I have looked into the copy design feature in vault however, you can only copy a project within a project, you cannot copy it to a completely new folder in the vault.
The other problem is, is that you can only add a prefix or suffix to every file/related part/assembly, & i would rather replace the project number rather then add the new project number to the file names. This would be a viable option if you could rename multiple files quickly, however this just stems back to the design assistant.
We have had this issue now for a couple years and don't know what is causing it. We are using vault pro with admin set single project file. A user can work for months using correct.ipj, then randomly at 10:42 they will notice the active project was been changed to some other temporary project location "c: emp.....". Then it will happen to different users at different times. I cant seem to find any correlation to anything. I can only imagine that it is somehow triggered from the vault addin.
We are inventor 1012 and vault 2012 pro.
For the last few years I had my content center libraries running as part of the vault server. I have not made any customizations.
I want to try to have the content center libraries on my local machine to see if that speeds things up.
Is that possible while still using the vault server for our regular data?
Do I need to make any changes to my project file?
IV210 Professional Suite
As I am creating drawings for parts/assemblies, I have to fill out the customers name and the job number which I currently do on every drawing I create by right clicking on the Drawing name in the tree, going to iProperties, and then filling out the fields I need.
I have to do this for every sheet. Sometimes over 100 sheets per job.
Is there a way, within the project file maybe, to have these fields be already filled in with the customers name and job number?
Every new project file I make is a new customer. So I'm wondering if there is someway to tweak the project file.
I tried to use 2012 task scheduler to migrate files, got an error message saying it won't support vault project file. I used vault project file for version 2010.
View 1 Replies View RelatedI would like to create a master background layer that multiple pages will be built over, while retaining the ability to edit the master background layer after-the-fact which will automatically change all the subsequent pages.
Similar to how an include file would work on a webpage, ie: create the menu as an include file, then all pages that reference that include file would have their menus changed when that single include file gets modified.
Or another way of looking at it: like how headers/footers work in word, ie: change the header or footer and all pages in that document are automatically modified.
Illustrator CS6 PC.
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
I do not have vault installed and I am trying to add sub files to my project. As of now my project has to find many of my files and I do not want to copy and past them into my project folder as this will mess with my parts numbering system. I want only one part / assembly file per part. I assume that you can do this with the project dialog box or some other system tool I just can not seem to figure it out.
View 1 Replies View RelatedIs it possible to have an idw file of a part as the master idw and insert that idw into a new idw or a few different idw files and the secondary idw files that were inserted update when the master idw file is edted or updated?
I am using the same ipt in multiple assemblies and i would only like to update one idw file. I do need to have as many as eight different idw files related to the single part and i would like to only update the master idw file.
I have an assy in which I have created work planes which are huge and annoying, so I make them invisible but when I save the assy I get a message saying the Design Current Design view representation.... blah blah..... or Unlock the Current one.
How do I unlock the Master View Rep.
the activation is failed because the serial number i've enterred is not valid. i install AutiCAD LT on tha same computer with new Operating System(Win7)
View 1 Replies View RelatedI have a cabinet that we make, and we put some holes through the sheet metal skin of the cabinet at the assembly level. I use iLogic to turn these holes on and off, depending on configurations.
Sometimes when switching between configurations the holes that were suppressed will disappear from my model and leave me with just the original sketch. So my iLogic rule errors because it can't find the hole feature.
I am using planes based off of the origin planes to define an axis that I use as my hole center line. And I then make a sketch on the XY origin plane to create a point for my hole. So everything there is independent of the cabinet model.
I have recently purchased a MacBook Pro and originally thought that I would be able to switch between boot camp and parrallels to run Inventor. After reading several threads there seems to be a problem with the Inventor Licience breaking if you switch from on environment to the other.
Has tried using the Lic. Transfer Utility when switching between the two. I know it sounds like a hassel, but shouldn't that work? I sure that isn't how it Utility was designed, but since the program thinks that you have changed computers?
I haven't tried this personally, but really that Inventor running thru boot camp would be the best environment for serious work and I could use parallels when I need to less intensive design or review?
I have loaded parallels 6 and windows 7 as a virtual machine with boot camp. I haven't loaded Inventor but plan on doing that today?
How can I block the View representations on Master, so that when I reopen the asembly it is on Master, or, the view I want ?
View 2 Replies View Related