VideoStudio :: MP4 File - No Audio Playing In Project
Jan 2, 2013
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
View 7 Replies
ADVERTISEMENT
Nov 11, 2013
I am working on creating a project and it all goes well when I have it in the edit tab. I am able to listen to the audio and watch the video.
When I hit the Share Tab and watch it the audio disappears and I can't hear anything anymore but can still see the picture.
I have split the audio from the video to see if this corrects the problem and it doesn't. I know my microphone is picking up the audio or I wouldn't be able to hear it in the edit tab. I have made several videos before using the program and have never encountered this before.
View 3 Replies
View Related
Jan 25, 2011
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
View 5 Replies
View Related
Jan 22, 2012
I am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
View 2 Replies
View Related
Sep 24, 2011
I'm using Corel VideoStudio X4. I'm facing problem that there is no any audio for any type of video playing. AVI, MP4.. any type of file I play, no audio plays.. All files are checked & plays correctly in any video player, GOM, VLC player etc...
No problem with video files. there is no audio for sample files provided by corel itself. When I play mp3 like audio files, sound plays perfectly. But some problem with video files only... I edited one file but no audio for that file also when I play edited clip in video player like VLC.
PC Configuration:
Windows 7 Ultimate.
HP DV6 laptop. 1GB graphic card, i5 2nd Gen.
View 14 Replies
View Related
Jan 2, 2013
i was work on some project and it's was going well and everything was just fine but then i've saved it and close the program (went to watch tv). after few minutes i've opend the program again but then the sound didnt play with "project" but only when i play the clip alone or in edit sound mode. * when i'm playing the project on "audio" instead of "thumbnail" it's working fine...
i'm using X5
ii've record some of my screen in here: [URL]
View 1 Replies
View Related
Feb 6, 2011
when I try to preview my project, I do not get any video. I can hear the audio though. When I preview individual clips I have both audio and video.
View 7 Replies
View Related
Mar 7, 2013
In VS Pro 4, in edit mode, I get no sound when I play the project but sound is OK when I play the clip. Then if I switch on the sound mixer I get sound when I play the project.
View 14 Replies
View Related
Nov 19, 2012
I just upgraded to Windows 8. All with Videostudio X5 is working fine, except MP3 files will not play in the Library. I get this strange hiss. If I drop the mp 3 file into the time line on any audio track and then play the project it plays fine. Wave files play fine. I did a uninstall and re-install of X5 to see If that would fix the problem.
View 3 Replies
View Related
Apr 13, 2013
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
View 1 Replies
View Related
Jul 12, 2011
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
View 5 Replies
View Related
Jul 16, 2008
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
View 14 Replies
View Related
Mar 26, 2013
Audio in clips (video or audio) plays but will not play in project preview or in created video files or DVDs.
Devices:
No special devices just the normal PC setup (using 3 monitors).
Video Studio version:
VSX4 Pro: SP1, SP2 and SP3 added with nothing else added (templates etc).
Source files:
Codecs Note:
I first tried VSX4 with only the codecs on the PC from a new install - that is a total wipe of the two SSD drives in the PC and a reinstall from 'clean' of Windows 8 Pro on the 'c:' main SSD and a new install of VSX4.
The PC then had adobe flash player added - mainly just for 'YouTube', 'DivX' and 'Xilisoft - Video Convertor Platinum' - a package I have used extensively before and along sided VSX4 without issue.
When I found that the audio issue continued I installed the latest available 'K-Lite' package via 'CNet - Downloads'. Throwing codecs at the problem is not necessarily I have used 'K-Lite' on and off for years though and have had no issues from 'K-Lite' (with VSX4).
Regarding .avi:
I am told there are some 800 plus known versions of files that have the .avi extension and this is problematic. However, I have tried many files and converted some to the somewhat 'standard' DivX, Xvid or H.264/MPEG 4 and had no luck thus far!
Have tried various source files from various sources. Have mostly tried .avi (DivX /Xvid) files but have also tried mpeg and mpeg 2. Have tried converting files from one type to other also.
I use the audio as it is per file and have tried splitting the audio and saving it as a .wav directly from VSX4 then using that .wav as a voice or music track. Split audio works in independent player (Windows Media Player) and plays directly in VSX4 as a clip but not when playing the project.
Project Properties:
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 16:9
I have not deliberately set any of the properties manually and they seem correct for my usage.
PAL or NTSC:
In the UK using Pal.
Error Codes:
None.
Trying to make:
So far just testing VSX4 in Win 8 and looking to make standard DVD of legally acquired old B&W movie(s) or home video only.
Additional:
All my PC drivers are up to date - I check video and audio drivers regularly and run windows update often.
I have .net as standard with Windows 8 but had to install an earlier version as it was reported as required by a game (Lord of the rings online).
End:
I know I have not given precise audio and video data but this is because no matter which video I use the problem is present - I have tried many videos and audio over the last week or so.
I wonder if this is a Windows 8 Pro issue only as when I had the same PC setup with the same VSX4 and the same software previously on Windows 7, VSX4 worked a treat! That is as close to 'same' as is possible - I know Windows 8 is a bit different to Windows 7.
View 6 Replies
View Related
Dec 1, 2012
I am not new to this software and have made many videos. The problem is that I got a new computer with Windows 8 and installed X4 VideoStudio. I can hear the sound file when I select the clip but as soon as I select Project, there is no sound. I am currently uninstalling the program and trying to reinstall.
View 2 Replies
View Related
Oct 5, 2011
Have just started working on VS and discovered a strange issue. I can put a piece of video in the clip window to mark in/out points and it plays fine. When I drag it to the timeline and play as a clip, there is no audio!
View 1 Replies
View Related
Aug 5, 2012
I'm trying to create a music video in the latest trial of X5 (with SP1 and latest QT) with not much luck as the audio/video sync keeps changing.
I've imported all my .MOV files into a project library, files ranging from 50mb to 1gb in size.
Clip properties are:
Video Track 1:
24bit, 1920x1080
29.970 frame/sec
Sound Track 1:
Compression: 16-bit Little Endian
48K, 16bit, stereo
From the get-go, when I Preview or Clip trim view any video segment, the audio is slightly out of sync. I've confirmed the original clip file is fine.
Since I am trying to sync only the video portion of the clip to a pre-recorded audio file I went ahead and lined up a few video clips with the audio file and it see if it would export in in sync but no such luck. Even after synching my video to my pre-recorded audio, the export is out of synch.
X5 looks like a decent program but if I can't even preview my clips with a good audio synch I think this X5 is tremendously flawed.
View 9 Replies
View Related
Apr 25, 2011
Just upgraded from X3 to X4 - created first project and as soon as I started trimming the video, I noticed that when I scrubbed through the project, there was no sound! I then tried scrubbing each clip, and that worked, then I tried scrubbing the project again, still no sound - tried clip on timeline and now no sound there also.
Threw out the clip, deleted the project and started over - same thing happened - audio dropped out as soon as I started cutting down the clip on the timeline.
Took exact same clip (simple .avi file) into X3 and works fine. Cutting it and editing it to hearts content, sound works fine in X3. Started over again in X4 - audio drops out AGAIN!
ZERO sound issues in any other program I have been using. Audio works fine in all other applications, except X4.
Yes "enable audio on scrubbing" is on - the audio is disappearing entirely from the clip. No audio on any form of playback as soon as I edit the clip on the timeline.
I have been playing with various clips and it seems X4 only does this on certain clips - namely the ones I have converted from .FlV to AVI - BUT, X3 handles them ALL fine!
View 8 Replies
View Related
Nov 24, 2011
I have seen others with this problem. I have downloaded all current codecs. I have audio in clip mode but not project mode. All attempts to edit and save file result in no audio.
this is the third version of video studio I have purchased.
Project properties
Xvid MPEG-4
24 bits 624 by 240
Audio Mpeg layer 3
113 kbts
48.000 kz stereo
View 1 Replies
View Related
Aug 13, 2012
I have created 2 Bluray discs with Video Studio X5 using clips from my HS700 Panasonic. The clips are high quality HD 1920x1080 AVCHD and import into VS as .mts files. I have created two discs and menus and burned them successfully and at the same time used the function that enables a file version to be stored. The discs play beautifully with menus working well on my Samsung Bluray player and TV and also in my PC drive E using WIN DVD Pro 11 (trial version).
My problem is when I try to play the VSX5 created file on C drive, with WIN DVD Pro 11, if I select the BDMV file it says "media not supported" and if I select the STREAM file it plays the files in the order that VSX5 created them, therefore playing the file 0000.m2ts first and onward to the last. In this case there were 4 AVCHD 1920x1080 h264 files rendered to video files and onto the disc and PC file with menus, therefore VSX5 created 18 .m2ts files in the stream file, 4 video files numbered 0000,0001,0002, 0003 and 14 menu files 0004, through to 0018, all of these .m2ts.
WinDVD Pro 11 plays the stream file as a Playlist in strict numerical order therefore playing the menu files last and not as a selectable thing.I guess my big questions are.1) Am I doing something incorrectly OR 2) Does WIN DVD Pro 11 ever play a Corel VSX5 created PC file as a menu selectable Bluray file like it does with a disc?I am running Windows 7-64 Professional with two 1TB hard drives, I have tried the files on either hard drive without success in playing as I expect (like a disc).
To go back a bit, I have a library of DVD VS created files and play through the Windows Media Centre, however with the Bluray ones it tells me I need to have a Bluray Player, hence my downloading the trial WINDVD Pro 11. The old DVD files had a TS file which contained the files necessary to play the video with menu, but there does not seem to be an equivalent in the Bluray folder.
View 4 Replies
View Related
Nov 20, 2012
I am burning DVDs from an hour long project file in ProX5, of a two act opera. Act I burned fine, but Act II which is a separate project comes out on the DVD with the audio ahead of the video. I am making coasters, have quite a collection. I've never had this problem before with burning DVDs. I have burn speed set to 16x, not maximum. In the past I normally use the project rendered to a movie for the DVD burn, but with editing changes I keep making, it is faster to just burn directly from the project.
I am not using a separate audio file. The audio is embedded in the video.When I play the project and not the DVD, the audio and video are fine.
View 4 Replies
View Related
Dec 16, 2010
I would like to add a music file on one track, sound effects like bells, dramatic drums on another. Is this something that I can do with VSP x3? If so where can I find out how it is done? If not is there a way for me to say put special sound effects in back of the main music clip in different places in the timeline?
View 5 Replies
View Related
Aug 17, 2011
When I do the final render on my project, I find that in certain spots the audio is clicking, kinda sounds like static. It tends to happen when I do hi-def renders, but almost happens all the time. The only time it doesn't seem to happen is when I do low quality rendering. However, when I am editing the project, before I do the final render, there are no audio clicks at all. how to fix it?
View 13 Replies
View Related
Aug 18, 2011
Describe your problem: Once I've inserted a video file or files into the project timeline, playing the videos with the word "Project" under the screen highlighted, the audio (which is speech only) breaks up - all I hear is parts of words every second or two. Highlighting the term "Clip" just under "Project" provides clear, unbroken audio. This condition is new, first occurring after I installed VideoStudio Pro X3 Fix for MLE Database Incompatibility with PaintShop Photo Pro X3. Since then, I have re-loaded VSX3 and all the patches but to no avail. Note: the same video files can be processed by Windows Live Movie Maker and the audio and video come out fine, even if the effects are primitive.
What devices are involved and their mode of connection?: NONE, files are either in the VS Projects file or in my Videos folder. The Version of program is being used: Video Studio Pro X3. Please list all patches/updates that have been installed relating to that version of the program. I've installed all three patches and updates available on the Corel site (thru the User to User board) plus any updates offered by Corel.
Details of the source files. Quick Time movie, 24 bits 1280 x 720, 1 video track, 1 sound track - sound track is MPEG-4, low complexity
Where did they originate: camcorder
How did they get onto your hard drive USB cable
Type of video: Quick Time Movie
Video data rate: 29.970 frames/second
Type of audio: MPEG 4 low complexity
Audio data rate: 48,000 KHz, 16 bit, Stereo
Project Settings: As the software was shipped. I haven't changed any settings.
NTSC
Did this error occur at the: EDIT step - but it continues in the SHARE step - except the sound goes completely away after processing. OR have you gone directly to the SHARE - NO
Error Codes NONE
View 14 Replies
View Related
Aug 22, 2011
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
View 7 Replies
View Related
Nov 5, 2013
When playing vlideo from a either a DSLR or my Canon XL-1 hear no audio from Photoshop CC.When I first opened the file had audio, but have hot heard a sound since then. Audio is fine using other software
View 1 Replies
View Related
Jan 11, 2013
I play audio with the following code:
var a = new Audio();
a.src = "xxx.mp3"; //.ogg if IE
a.play();
It works on different browsers including IE, firefox and chrome, but have no sound on Safari. I tried Safari 5.1 on PC and on iPod 4.3.3. I tried .wav, .ogg, .mp3.
View 6 Replies
View Related
Mar 4, 2014
I have a short 5min film for a student film fest, all the audio and visual plays perfectly in the timeline. However, when exported, the last audio clip (which is a 'button' and comes after two soundless title slides) does not play at all. Again, it works perfectly in timeline. All audio files are .WAV and I've tried exporting it in several different fashions, none of which have made a difference.
For the film fest I need to export in 16:9, Apple ProRes 422 (HQ). I tried this, among regular Quick Time export, Vimeo export, and others...every single export the audio on the 'button' didn't play at all but the clip is there.
Side Note: I tried adding low volume audio to bridge the last clip to the button to see if that made a difference so there would be no gaps in the audio timeline, but it did nothing.
View 1 Replies
View Related
Mar 21, 2014
After importing my mp4 video into Premiere Pro, the audio plays perfectly, but the video is out of sync and plays as if though it's in slow motion.I've been using this software for about 4 months and have encountered this problem within the last few weeks.
View 13 Replies
View Related
Dec 13, 2013
I started a Premiere Pro CS5 project on my PC at work. Video files played both audio and video, life was good. Unfortunately my PC at work is slow, so I want to continue working on the project on my home PC. Uploaded the needed files with Sugarsync, went home, but when I open the project here all the video files only play audio.
So I know the files CAN display video, so it must be something to do with my home computer and CS5 install? I tried reinstalling PP CS5, no change. Is there a setting I may have accidentally disabled at home to force audio only?
View 11 Replies
View Related
Jan 22, 2013
I'm using Elements 9.03 with Windows XP. When I download videos from my Sony HandyCam, the video portion of the file does not play back, only audio. Is there a setting I can adjust or do I need to use a more recent version of Windows?
View 1 Replies
View Related
Nov 15, 2011
I made my first Bluray video onto a Disk....looks great (with audio ). But now, when I try do more editing , make another disk, or save to a file in my PC., I have no audio. If I save it as a dvd, the sound is fine. I've reinstalled the software, still the same. Have I turned the audio off somehow when I try to make the file in Bluray format ?
View 6 Replies
View Related
