Premiere Pro :: Video Files Playing Audio Only On Specific Computer?
Dec 13, 2013
I started a Premiere Pro CS5 project on my PC at work. Video files played both audio and video, life was good. Unfortunately my PC at work is slow, so I want to continue working on the project on my home PC. Uploaded the needed files with Sugarsync, went home, but when I open the project here all the video files only play audio.
So I know the files CAN display video, so it must be something to do with my home computer and CS5 install? I tried reinstalling PP CS5, no change. Is there a setting I may have accidentally disabled at home to force audio only?
View 11 Replies
ADVERTISEMENT
Mar 21, 2014
After importing my mp4 video into Premiere Pro, the audio plays perfectly, but the video is out of sync and plays as if though it's in slow motion.I've been using this software for about 4 months and have encountered this problem within the last few weeks.
View 13 Replies
View Related
Jan 22, 2013
I'm using Elements 9.03 with Windows XP. When I download videos from my Sony HandyCam, the video portion of the file does not play back, only audio. Is there a setting I can adjust or do I need to use a more recent version of Windows?
View 1 Replies
View Related
Mar 4, 2014
I have a short 5min film for a student film fest, all the audio and visual plays perfectly in the timeline. However, when exported, the last audio clip (which is a 'button' and comes after two soundless title slides) does not play at all. Again, it works perfectly in timeline. All audio files are .WAV and I've tried exporting it in several different fashions, none of which have made a difference.
For the film fest I need to export in 16:9, Apple ProRes 422 (HQ). I tried this, among regular Quick Time export, Vimeo export, and others...every single export the audio on the 'button' didn't play at all but the clip is there.
Side Note: I tried adding low volume audio to bridge the last clip to the button to see if that made a difference so there would be no gaps in the audio timeline, but it did nothing.
View 1 Replies
View Related
Nov 5, 2013
When playing vlideo from a either a DSLR or my Canon XL-1 hear no audio from Photoshop CC.When I first opened the file had audio, but have hot heard a sound since then. Audio is fine using other software
View 1 Replies
View Related
Sep 24, 2011
I'm using Corel VideoStudio X4. I'm facing problem that there is no any audio for any type of video playing. AVI, MP4.. any type of file I play, no audio plays.. All files are checked & plays correctly in any video player, GOM, VLC player etc...
No problem with video files. there is no audio for sample files provided by corel itself. When I play mp3 like audio files, sound plays perfectly. But some problem with video files only... I edited one file but no audio for that file also when I play edited clip in video player like VLC.
PC Configuration:
Windows 7 Ultimate.
HP DV6 laptop. 1GB graphic card, i5 2nd Gen.
View 14 Replies
View Related
Mar 8, 2014
After rendering a few clips in my timeline for playback, my video tracks are no longer playing back. The timeline time marker plays, the time counts, and the audio playback is working correctly, but the video stays on the frame in which playback started, and does not move change until pausing playback.
View 2 Replies
View Related
Dec 5, 2013
Started using premier pro I have imported some video and all looks fine but when you hover cursor over the video it plays the video with a gradient map effect even though an effect has not been added. when you place video into the timetime the video preview playes with this effect also but when I have exported video the video is exported as normal without this effect.
View 2 Replies
View Related
Feb 13, 2014
when I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies
View Related
Apr 10, 2014
since I updated my Mac OS to 10.9.2, my Adobe Premiere Pro CS6 has a problem: when I import MTS-files (AVCHD) from a Sony video camera, I get the video, but I don’t get the audio! That’s strange, because when I import other video formats like mp4, everything is fine, and I get video AND audio.
I also tried Premiere CC test version, but there’s the same problem.
Before my update I had Mac OS 10.6 and Premiere worked fine.
View 2 Replies
View Related
Dec 4, 2013
the original clip is visible perfectly fine,however the edited version now just looks like three coloured bricks instead of an image, and in the preview is simply a blank screen. I can export the clip and view it fine that way, however the quality is much lesser.I'm about to give up on this entirely.
View 1 Replies
View Related
Dec 12, 2013
I am editing footage for a nonprofit and they gave me footage of an interview that is an MPEG Movie, 1920 x 1080, Frame Rate: 29.97 and Pixel Aspect Ratio: 1.0. There is no in camera audio, but there was audio recorded separately in a .wav file. The interview was shot on a Canon 60D and I created a sequence from the .MOV file off the camera and put in the separate audio file. The problem is when I sync the beginning it will stay in sync for about 2 seconds before it slowly gets off sync the longer it runs. The video doens't look like it is running fast, but I have to slow it to almost 80% before the audio even matches for more than a second. I don't understand why they will not sync up.
View 1 Replies
View Related
Jan 27, 2014
So the option to add Adding Video/Audio Tracks to Timeline are "grey'd out" and what's even more strange is that they don't even have the one or two tracks that are usually in the timeline when you open new project.
View 14 Replies
View Related
Jan 5, 2014
I am newer to using Adobe CS 6, but I am having a problem I have never had before. When I play the video I edited in adobe timeline everything is perfect. But when I export the video, the video and audio export in different files. The video has no audio, and the audio has no video.
View 6 Replies
View Related
Apr 17, 2014
I'm importing a 878,367KB .mov file into Premiere Pro - and while the full audio is there, the video screen is just green.When I put it into a sequence, the preview pane is black - and when I try to render it, it says "Error compiling movie. Unknown error."
View 4 Replies
View Related
Dec 19, 2013
I have been editing on Premiere and just recently encountered this problem: the video and audio get out of sync AFTER I have imported my media into the program. I have been importing my media in the following process:
I upload the media from my SD card in my camera onto my computer.I watch the media in QuickTime and it plays perfectly. Nothing is out of sync and everything plays in normal time.I create a new project in Premiere and import the media from my computer into the new project.I go to play the media back and start editing, and find the video and audio are out of sync. The video is playing extremly slowly and the audio is playing perfectly fine. I have played around with the speed and duration of just the video (not the audio) and all it does is create weird skips in the video. I have also tried exporting the media to see if it would somehow render itself out, but nothing seems to work. The problem is not with the camera or the original media.
This is how the video looks when I play it straight from QuickTime after uploading the media onto my computer from the SD card.
View 8 Replies
View Related
Dec 18, 2013
I've been using Xsplit to record games while I play. I recorded a ~2 hour video and toward the beginning of the video it seems to be pretty a-okay but later in the video when I play it in premier pro, the audio starts falling out of sync.When I play the original raw video the audio and video are both on time.
I read somewhere that the reason why the audio was out of sync was because xsplit uses a "variable framerate".
Not sure if this is true or not, but regardless, I tried exporting numerous times and the audio STILL falls out of whack. I looked on xsplit and there was a setting that i could enable to force constant frame rate..
View 4 Replies
View Related
Dec 9, 2013
I'm exporting DSLR footage with synced audio in order to "bake" the audio in. I'm going to bring the export into Prelude to organize and then back into Premiere to edit. What are the best export settings (including target and maximum bitrate) to maintain top quality footage that I'll continue editing?
View 1 Replies
View Related
Dec 2, 2013
So I've recorded some footage on GoPro Cameras at 1080p at 29.97 fps. The audio is 48000Hz.
I've recorded audio using Two Zoom h4ns simultaneously. One is at 44100 Hz at 16 Bits and the other is at 44100 Hz at 24 bits.
Now I've tried both a 24fps sequence and a 30 fps sequence, but neither of Zoom recordings match the video, they start off in synch (because i synch them) and then fall out of synch (obviously).
Is it that they fact that they were recorded at different Hz or fps/bits affect it? Is there any way to fix it that wouldn't destroy the footage aesthetically?
View 1 Replies
View Related
Jun 27, 2013
This is a daily occurrence. As I go along editing, I inevitably come upon some video clip (or audio clip) on my timeline that is missing it's original audio (or video) counterpart. I've previously deleted the audio portion (or video) at some point earlier in the edit, when it made sense to do so. Now, though, I change my mind, or I need to hear the audio to sync other clips, or just hear the audio for reference, etc.
How do I bring back the corresponding media? I love the new "Join Through Edits" command in Premiere Pro CC, it seems that a companion feature would be something like "Restore Original Linked Audio / Video"
Match Frame seems close to what I need, but involves a few more steps than a right-click, or keyboard shortcut (maybe I don't properly understand how it works). Does any command exist that would do what I'm needing? I can't imagine I'm the only one who would need this function DAILY.
View 6 Replies
View Related
May 9, 2012
Audio sync problem I'm experiencing with videos recorded with the latest iPad 3 (well, that's what I'm calling it anyway).
I believe the iPad 3 recording format is 1080/30p with 44.1Khz / 16 bit audio, but when I match those settings on a Premiere Pro CS5.5 project (or try 48KHz audio as a test), the audio gradually goes out of sync. If the video is several minutes long, it becomes quite obvious, and by 10 minutes, it's terrible!
I should add the file plays back fine on the iPad itself and was imported to a Mac via iTunes. It also plays fine on the Mac itself in Quicktime.
On a related note, I additionally captured the audio using a Zoom H2n which i intended to replace in Premiere, but foolishly I captured it at 48KHz, rather than the 44.1KHz of the iPad video file. Should I resample it?
I actually managed to line-up the 48 and 44.1KHz waveforms from the iPad and Zoom in Premiere quite accurately, but again both gradually go out of sync with the video...
I'm running Premiere Pro 5.5.2 on Mac OSX 10.7.3.
View 15 Replies
View Related
Jan 9, 2014
Is it possible to capture video using Premiere Pro (or any other program from the Adobe Creative Suite) directly from my dvd player on my PC or my superdrive? If not, how can I capture video from DVDs? These are not copyright protected DVDs. They are copies on DVD of on-camera work I have done that I would like to digiitize to make a demo reel.
View 11 Replies
View Related
Jan 30, 2014
I have a several dozen shots, Quicktime ProRes 422 HQ. When I try to import them into Premiere CS6 all the arrives in the bin is the audio of the clips. The video has been stripped. But if I play the clips outside Premiere - just double click them open and play them with Windows Media Player, they play fine.
I'm not having trouble with any other formats.
Just the ProRes. And I must have the necessary Quicktime ProRes plug-in installed, as the individual clips open and play fine.
View 1 Replies
View Related
Mar 23, 2014
It was working before. Now I can't insert any audio at all. I even tried using some of the video clips that I have already extracted audio from and they no longer work. When I have it up in the source box I can play it and the aeudio is there. But if I ovrwrite the clip or drag the clip it adds the video only with no audio. Even if I try to drag just the audio it won't allow me to put it in any ofc the audio trays. Did I acidentally push a button and turn iaudio off. How do I fix this?
View 1 Replies
View Related
Jan 13, 2014
I have 2 years of footage related to a project and I'm looking to have it centralised and have metadata attached to it that will allow me to cross reference footage, for example, when someone in an interview talks about losing weight and to be able to pull up clips that relate to that.
I got a feeling that an Excel spreadsheet is the way...
View 1 Replies
View Related
Nov 28, 2013
I am new to working with bigger projects in Premiere, I moved from FCP last year. I am currently editing a show which is based of Line recorded cameras.
I have 6 Tracks of video, plus mulitple audio tracks and 2 hrs long
My problem. Having made and lifted my selects in the timeline I now am finding the timeline to be very unresponsive to the point of pinwheeling even just to open the sequence. I can't zoom, move or edit anything in this timeline without a pinwheel and a 30 second delay. None of my other sequences are having this issue. All are the same codec.
Is there a way to set up larger sequences so that this does not happen? I find premiere 7.1 is fine until I build bigger sequences/projects. My inital thought was drive speed, however the issues only arose when I had lifted all the selects.
Could it be that I have too many tracks of video for premiere to handle? I have no problem playing the timeline (although it will initally pinwheel) its mainly navigation/clip selction along the timeline which causes an issue
I tried multicam also but that had too many issues
I work on a 2012 Mac Pro 2.4 Ghz 12-cores with 12 GB ram 9 of which is allocated to premiere. I also have my working caches on a dedicated single 3.5" 7200 rpm drive 1gb graphics card.
View 1 Replies
View Related
Feb 12, 2014
How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file). Also, my client is having a hard time making an omf that Pro Tools can read. The files can not be found by Pro Tools. How do you make an omf that Pro Tools can read?
View 2 Replies
View Related
Jun 13, 2013
Photoshop CS6 Extened won't play or process Dolby Digital (AC-3) Audio Files from my AVCHD video files.The video plays fine just no sound at all. When processed still no sound. Are there any (AC-3) audio codecs I can download and install. How would I install them. Do I need to convert audio files to another format & if so how & what format.
View 1 Replies
View Related
Jan 13, 2014
I imported some AVI files. The audio is over modulated in Premiere, but fine in any other player.
View 2 Replies
View Related
Oct 9, 2013
I can't upload audio files into premeire elements. I keep getting an add media failure message that says, the importer reported a generic error.
View 1 Replies
View Related
Mar 5, 2014
I've been working the last 6 months with 4 GH2s and ran into some strange troubles when initially importing them to the timeline. 2 hour shots are divided into 6 or 7 different files, and when brought into PP the first clips audio was assigned to all the other remaining clips. This was pretty strange, but I fixed it by using TSmuxer. It was added time in the workflow/set up, but in the end I could produce;
The latest update of PPCC now combines the entire 2 hours of footage into each of the 7 files being imported. So it is importing 2 hours of footage 7 times for each camera. The conforming is taking forever! For 4 cameras it's conforming 14 hours of footage each, when it should literally be a 7th of that.
It is taking up large amounts of time and disk space.
View 6 Replies
View Related
