Premiere Pro :: Playing Video With A Gradient Map Effect
Dec 5, 2013
Started using premier pro I have imported some video and all looks fine but when you hover cursor over the video it plays the video with a gradient map effect even though an effect has not been added. when you place video into the timetime the video preview playes with this effect also but when I have exported video the video is exported as normal without this effect.
View 2 Replies
ADVERTISEMENT
Mar 8, 2014
After rendering a few clips in my timeline for playback, my video tracks are no longer playing back. The timeline time marker plays, the time counts, and the audio playback is working correctly, but the video stays on the frame in which playback started, and does not move change until pausing playback.
View 2 Replies
View Related
Mar 21, 2014
After importing my mp4 video into Premiere Pro, the audio plays perfectly, but the video is out of sync and plays as if though it's in slow motion.I've been using this software for about 4 months and have encountered this problem within the last few weeks.
View 13 Replies
View Related
Dec 13, 2013
I started a Premiere Pro CS5 project on my PC at work. Video files played both audio and video, life was good. Unfortunately my PC at work is slow, so I want to continue working on the project on my home PC. Uploaded the needed files with Sugarsync, went home, but when I open the project here all the video files only play audio.
So I know the files CAN display video, so it must be something to do with my home computer and CS5 install? I tried reinstalling PP CS5, no change. Is there a setting I may have accidentally disabled at home to force audio only?
View 11 Replies
View Related
Jul 11, 2010
I just came over from Sony Vegas Pro 9 (which kicks ***, but has bad native support for DSLR files).
In Vegas you can apply effects to video in three ways:
1. A whole clip in the project media bin (automatically applying such effects to all timeline events using this clip).
2. Individual timeline events.
3. Entire video tracks (automatically applying such effects to every clip on the track).
Is this possible in Premiere CS5? I find it hard to believe that it's not possible since it is such a useful thing to do. For example, what if you have a bunch of footage that you want to look grainy but you don't want to apply the same effect to every timeline event from the clips because it is time consuming and creates many sources of change if you want to tweak the effect settings?
View 20 Replies
View Related
Jan 13, 2014
I want to add a skip frame effect to my video. Which tool should I use?!
View 2 Replies
View Related
Dec 7, 2013
I notice red cursor jumping back and forth as I play to edit in open project - did not do this before.What can I do?
i recently dragged the Premiere pro cc icon to my apps folder - could this have introduced a time /rendering delay?I think the sound has also become lower!
View 7 Replies
View Related
Mar 4, 2014
I have a short 5min film for a student film fest, all the audio and visual plays perfectly in the timeline. However, when exported, the last audio clip (which is a 'button' and comes after two soundless title slides) does not play at all. Again, it works perfectly in timeline. All audio files are .WAV and I've tried exporting it in several different fashions, none of which have made a difference.
For the film fest I need to export in 16:9, Apple ProRes 422 (HQ). I tried this, among regular Quick Time export, Vimeo export, and others...every single export the audio on the 'button' didn't play at all but the clip is there.
Side Note: I tried adding low volume audio to bridge the last clip to the button to see if that made a difference so there would be no gaps in the audio timeline, but it did nothing.
View 1 Replies
View Related
Mar 11, 2014
We thinking about buying Adobe Premiere Pro for production of movies shown as LED banners on sport arenas. We need to make a customised projects and sequenses where 20 small movies are shown on the screen at the same time. Full screen has a solution on 2560 x 1120 px. Each small movie has a solution on 1280 x 112 px. The 20 movies filles up the total screen. Is this posible and an eacy thing to do in Adobe Premiere Pro?
View 2 Replies
View Related
Nov 26, 2013
Any solution regarding why video is not playing LR 5.2? In the past video worked fine until this update. I have looked thru the threads and see that other people have had a similar problem. One person said she reinstalled numerous times and then suddenly it began working?!?! I have downloaded all updates and it does not work. Yet I have confirmed that i can go to the files directly and open/play them using other programs.
View 2 Replies
View Related
Dec 19, 2013
I started a project and watch a lot of files in the source monitor to set IN and OUT points. When the file playes f.e. more than a minute the sound gets muted while the film is still running. First I thought it wood be a matter of my external HD from where I loaded the files. Now that I take the same or any other files from my internal sata 3 harddrive the behaviour is still the same.
When i scroll the mouse wheel to move some frames back and forth the sound is back when i hit the space bar. It's the same if i just hit the space bar once to pause and then hit it again to resume.
The effect shows after different amount of times, sometimes after 45 sec. and sometimes after 2 minutes +
I am running Pr Pro CS6 (latest update installed some days ago) on a windows 7 ultimate x64, 16 GB of ram, Nvidia GTX 670, i7 3770, HD is a WD caviar black
The movie clips come from a Panasonic Lumix FZ 150 in FullHD resolution as h.264 MP4 files.
I am quite sure that some months ago this behaviour was not present. I did not change anything on Premiere CS6 but running the updates.
View 7 Replies
View Related
Nov 5, 2013
When playing vlideo from a either a DSLR or my Canon XL-1 hear no audio from Photoshop CC.When I first opened the file had audio, but have hot heard a sound since then. Audio is fine using other software
View 1 Replies
View Related
Sep 24, 2011
I'm using Corel VideoStudio X4. I'm facing problem that there is no any audio for any type of video playing. AVI, MP4.. any type of file I play, no audio plays.. All files are checked & plays correctly in any video player, GOM, VLC player etc...
No problem with video files. there is no audio for sample files provided by corel itself. When I play mp3 like audio files, sound plays perfectly. But some problem with video files only... I edited one file but no audio for that file also when I play edited clip in video player like VLC.
PC Configuration:
Windows 7 Ultimate.
HP DV6 laptop. 1GB graphic card, i5 2nd Gen.
View 14 Replies
View Related
Jun 17, 2013
I am a amateur editor and do the basic stuff with the editing like color fixing and cropping/cutting. Since the time, i switched to HD videos the video does not render and playback smoothly in preview mode.
However in other editing programs like Vegas it plays back like butter but i am not into Vegas and i dont like vegas. I use Videostudio only.
the video plays back like in 1FPS or like 2-3FPS i mean the videos one picture is shown then directly after 2-3 seconds. The audio is howver smooth.
I have a Duo Core 2ghz Intel Processer,
View 9 Replies
View Related
Mar 29, 2013
I had VisualStudio x5 working fine on my Windows 8 Pro machine. I've been using this for a few months without issue. I imported some video from my phone in .MOV format, and had the message that I needed install quicktime to work with this video. I did so, edited video, and posted it.
However when I then imported video from my Canon camcorder, AVCHD format, I received a crash dump in trying to play any of the clips. What's strange is that I was able to look at old sections of clips I'd saved and play them find. Only the newer clips were an issue. I suspected corrupt files, re-imported things and it didn't work. I even recorded new video and that didn't work. I was up to date on patches from Corel, according to the product.
I was in a bind, so I decided to upgrade to x6, even though none of the features were really important. I upgraded, imported the same videos I'd had issue with in x5 and they worked. Problem solved, or so I thought.
I had to run x5 to access some old clips to put together a short reel. I did that and things worked fine. I then went back to x6 and received crash dumps on all imported files, including the video I had just imported. I can still play the edited pieces of clips I separated out in x6, but I cannot play any full clips.
I've rebooted multiple times, removed quicktime, uninstalled and reinstalled x6, no go.
View 2 Replies
View Related
Feb 6, 2011
when I try to preview my project, I do not get any video. I can hear the audio though. When I preview individual clips I have both audio and video.
View 7 Replies
View Related
Sep 18, 2012
As I screen video clips in Lightroom 4, I'd like to be able to view the timecode numbers in the window so that I can log the footage. Can this be done?
View 1 Replies
View Related
Jul 21, 2013
I have an embedded video in my animation , in an earlier state on my timeline I have a back button.
When the back button is pressed teh animaiton returns to this state but the video still plays in the backround.
The video cant be seen as its only appears at a later stage on the time line but the audio can still clearly be heard.
View 4 Replies
View Related
Aug 13, 2013
I came across this one tutorial that I'm liking, but in many parts he doesn't explain enough. He just kind of says "Click this, press that. Toward the beginning of the video when he is playing with the rust picture to get just the rust to show, break that down for me so that I can understand the actual princibles behind that so I can apply it elsewhere.[URL]...
View 4 Replies
View Related
Jan 4, 2013
Playing a video will cause Lightroom 4 to crash in Windows 7. It seems to be correlated with several videos open in the grid.
View 4 Replies
View Related
Apr 3, 2012
Suppose you apply spiraling effect on the left edge of the figure (clockwise) and want to reproduce the same effect,but with the same intensity on the right side of the figure (reverse clockwise) so that both effects have symmetry.Clicking on the opposite edge of the picture and select the opposite direction (changing clockwise direction in the appropriate button) does not necessary mean that there will be the desired symmetry, once you can not determine how much pressure should be given to get exactly the same spirals intensity given to the left edge.
Is there any way to do it accurately? In what moment you should release mouse so that the number of turns is the same as previously established (left side)?
View 3 Replies
View Related
Jan 8, 2012
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies
View Related
Feb 17, 2014
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
View 1 Replies
View Related
Jan 22, 2013
I'm using Elements 9.03 with Windows XP. When I download videos from my Sony HandyCam, the video portion of the file does not play back, only audio. Is there a setting I can adjust or do I need to use a more recent version of Windows?
View 1 Replies
View Related
Feb 13, 2014
when I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies
View Related
Dec 16, 2012
Is there a way to duplicate the 4-color gradient in Premier Pro's Titler? I have used it through out a project, and would like to use it for the DVD menus and such.
View 4 Replies
View Related
Nov 5, 2005
how to do this cool gradient effect on photos,
I tried to do a gradient overlay but that doesnt do it.
View 7 Replies
View Related
Jan 7, 2013
I have made a tv icon and on the object that's suppose to be the screen I would like to add a Lens Flare effect.However, I cannot seem to get the Flare placement just where I would like for it to be also, I used a Gradient (on the screen) of a mid Grey color and White set to Radial but it seems as though when the Gradient Effect is turned on the Flare is behind the Gradient effect. So, I assume I cannot use both ~ together??
But, the lesson by which I followed seems to have used both effects ... ie: the Flare seems to be on top of the Gradient. Thus far I tried to Duplicate the layer and then tried to put the Flare on the duplicate and I have tried different Layer Blends, Opacity etc, but I cannot seem to achieve the desired result.
The blue one is the one I made. The red one is a partial shot of the one from the lesson. See how the screen has the Flare effect and also seems to have the Radial Gradient? The tut doesn't offer any instruction as to how the author/artist went about achieving the result.
View 5 Replies
View Related
Jan 28, 2013
If i apply gradient then bevel effect the gradient effect disappear, how do i do this? what im trying to do is the piping.
View 1 Replies
View Related
Mar 24, 2004
to create a dotted gradient effect as shown in the below image.
View 6 Replies
View Related
Feb 8, 2004
I was working on a design. I had a dark gray background and was going to do a soft white gradient effect in my selection.
When I went to do it, for some reason it was reversed. The gradient came into the selection but just above the selection was a darker color. So it looked like a gradient with a shadow all at once.
Then I looked at my layers and noticed I was not in the new layer, but I was on my background layer, so it was one layer.
So when I did the design, I went back to play with gradients and it wouldn't happen anymore. Does anyone know how this happened, it was a nice effect.
My mode was on "normal" and the only difference is that I was on a background layer already filled with color, so I thought that was it, but apparently not.
it looked pretty clean to get a gradient with a shadow effect on the outside of the selection. The only other way it does some of this effect, is when I feather the selection and use foreground/background color with the gradient tool, but it's not the same.
View 3 Replies
View Related