Premiere Pro :: Apply A Video Effect To A Track?
Jul 11, 2010
I just came over from Sony Vegas Pro 9 (which kicks ***, but has bad native support for DSLR files).
In Vegas you can apply effects to video in three ways:
1. A whole clip in the project media bin (automatically applying such effects to all timeline events using this clip).
2. Individual timeline events.
3. Entire video tracks (automatically applying such effects to every clip on the track).
Is this possible in Premiere CS5? I find it hard to believe that it's not possible since it is such a useful thing to do. For example, what if you have a bunch of footage that you want to look grainy but you don't want to apply the same effect to every timeline event from the clips because it is time consuming and creates many sources of change if you want to tweak the effect settings?
View 20 Replies
ADVERTISEMENT
Dec 10, 2013
I just finnished editing a music video.
It has over 8 video tracks and now I want to export it to a EDL format but It looks like everything needs to go on 1 video track.
View 1 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Feb 20, 2014
Or can I? "Link" is greyed out
View 8 Replies
View Related
Dec 5, 2013
Started using premier pro I have imported some video and all looks fine but when you hover cursor over the video it plays the video with a gradient map effect even though an effect has not been added. when you place video into the timetime the video preview playes with this effect also but when I have exported video the video is exported as normal without this effect.
View 2 Replies
View Related
Jan 13, 2014
I want to add a skip frame effect to my video. Which tool should I use?!
View 2 Replies
View Related
Jan 28, 2012
When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies
View Related
Dec 9, 2013
In VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
View 2 Replies
View Related
Jan 17, 2012
I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies
View Related
Nov 24, 2013
How do I apply the mask track feature on After Effects CC? I can't seem to find it.
View 1 Replies
View Related
Apr 18, 2014
I need to fade a music track in and out but I'm not able to add keyfrmaes with the pen tool. And the Add Keyframe button next to the audio track in sequence is greyed out.
View 5 Replies
View Related
Feb 2, 2014
Is there any way to track select backwards, a la FCP7, in Premiere? I've tried all the modifiers but no luck. I'm guessing 'no but feel free to fill out a feature request'..
View 3 Replies
View Related
Dec 27, 2013
when I right-click on the soundtrack and select 'edit in audition' it does the 'render and replace', but does not open Audition. Even when I open Audition first, it will not place the sound track in the Audition software.
View 1 Replies
View Related
Mar 12, 2014
I watched a video clip and I liked everything from, let's say the :30 mark to the minute mark. So, I import it into Premiere. However, when I put it at the end of the next clip, it shows the time for the whole sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) is by avoiding doing the calculation? It's do-able, but seems a little tedious. Would like to "reset the clock" so to speak when working on individual clips within the timeline.
View 2 Replies
View Related
Jan 8, 2012
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies
View Related
Feb 27, 2014
the latest Premiere Pro CC update is supposed to improve multi-cam editing of MXF footage, but I'm still having problems with C300 footage. After flattening a multi-cam track (containing a mix of C300 and Canon 5D 3), some of the C300 clips appear with a striped pattern (the represeantation of the clip in the time line), and don't play back any content. The content is still there, but I have to go back into the original multi-cam sequence, find it, cut it out and replace the "empty" clips in the flattened track.
View 16 Replies
View Related
Apr 17, 2014
I'm new to CC's Mulicam feature, but well versed in the more limited equivalent in FCP. I was delighted with everything about it, until I began actually cutting multicam footage into my sequence.
Whenever I try and overwrite/insert/drag the multicam material into the sequence, it brings in 18 audio tracks- in spite of the fact that my multicam sequences have only 4 audio and 2 video tracks.
No amount of track deselection on the destination sequence works with this.This is going to be a real problem as I add new material into an existing a rough cut, with a 5 track temp mix. how I can specify only 1 or 2 tracks of audio?
I'm running 7.2.2, on OSX 8.5.
PS, Also unable to insert images into this post. Using Chrome Version 34.0.1847.116
View 6 Replies
View Related
Feb 17, 2014
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
View 1 Replies
View Related
Mar 17, 2014
I am exporting dailes clips.We record dual system and there are two different audio levels - on the two different channels.However, when I export a clip from Premiere and set the audio option tol the uncompressed codec it defaults to a "single track" audio layout with no option to change. However, if i change the codec to AAC or any other I am allowed to chose whether I want a single mono track or a stereo track.
Additionally - if that single uncompressed track is an amalgamation of my original two tracks - or if it has just defaulted to one or the other.
View 7 Replies
View Related
Feb 24, 2012
I'm a professional musician trying to create material for my website and YouTube. I recently shot video with two cameras at an event. I need to learn
1) how to insert the second video track,
2) how to line it up to the exact time of the first video track, and 3) how to pan back and fourth between tracks to create a short film.
View 11 Replies
View Related
Feb 13, 2014
when I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies
View Related
Apr 11, 2013
I recently started using my DSLR (Nikon D800) to shoot some video. My wife has several musical projects and I'm just shooting some basic demo videos. But since these are musical projects, the audio is important. And while I plug the camera microphone port directly into the mixing board, and get really good audio, I still want to be able to work with the audio track separately to do some basic equalization, volume adjustment, etc.
Photoshop's video handling is pretty basic, and it seems all I can do with the audio track is delete it, adjust the master levels, or add an outside track.
Is there a way I can strip off and save the audio to a separate file and process it with audio software (what software?) so I can then re-add it Photoshop?
Am I approaching this from the wrong angle? I don't want to spend tons of money on a full video editing package. Is there audio software that can open the video file and just edit the audio track?
View 1 Replies
View Related
May 23, 2012
Upon uploading a video clip that already has video sound attached, why am I not able to hear that video sound when I try to edit my video?
View 4 Replies
View Related
Oct 28, 2012
I am using VS5 for the first time by creating avi files in Proshow Producer and importing them into video studio to make a show with both video and still images. My question is; once clips are imported to the video track can they be moved left or right? The reason I ask is the videos made in Producer are not necessarily in the order of the finished show and I would like to move the clips around to make the flow of the show smoother. When I try to move the clips on the video track they won't move left or right but only up or down in the overlay track. When I move the clip where I want it and move it into the video track the clip snaps back into it's original position. Is moving the clips into the overlay track the only way I can put them where I want them or am I missing something?
View 9 Replies
View Related
Feb 5, 2011
I'm VERY new at Corel Videostudio Pro X3.How do I move the video track in the timeline? I can't make it work unless the clip is in the overlay track.
View 7 Replies
View Related
Apr 14, 2013
I made a 4 minute video comprising 25 clips including background audio and an accompanying "Auto Music" Music track.At present the background sound of the kiteboarding video is too loud and overpowers the music.
How to I reduce the volume of the entire 4 minute video track in a single procedure? If I open Sound Mixer I only see a way to adjust individual points in each of the 25 individual clips. So changing it this way would involve a ridiculous amount of work. Ideally I would like to simultaneously reduce the background water action sound to about 25% of current lever for the entire video track. Then perhaps go back in and bump it up again in one two two spots to accentuate things. I can select the entire video track with shift/enter but then most of the menus are greyed out. Also tried splitting audio from video but it only does it for one clip at a time. Surely there is an easier way?
Background: I am new to videostudio after deciding Adobe Elements which came with my HP laptop is too complex for what I want. All I want is a simple video editing package. So that I can take kiteboarding video from a GoPro, cut it down to something worth watching and adding non copyright background sound. I can then put it on my iPad or share it to friends via youtube. So I am trialling VideoStudio X6 which seems to fit the bill. Dealing with the audio is the only bugbear I have and I want to work it out before I buy it. I cannot believe it can be so complicate to bump the background audio volume down a few notches.
View 3 Replies
View Related
Jun 9, 2011
I am putting together a biographical video of my wife and myself for our kids (married 50 years). I want to have a video of her (example) sitting and talking about growing up. Is there a way to insert a photo on the main video track and still keep the voice track intact? Example: She is talking about her childhood. A photo apears of her as a small girl while she is still talking. The photo goes away after a few seconds and there she is live and taliking. I hope to get away from using the overlay track.
View 6 Replies
View Related
May 15, 2012
Is there a way to show more than just one thumbnail from a given clip when inserted into the video track? Currently in VS X4 I get just a thumbnail at the start of the clip and a blue bar after that. In Microsoft Movie Maker by comparison you get thumbnail after thumbnail from the various frames within the clip, I also see in one of Trevor's tutorials (bottom of the page) URL.... there's thumbnails galore but he may be using images rather than a video clip.
View 3 Replies
View Related
Feb 26, 2011
When I apply a transition to a clip on the overlay track (and/or title track) the transition is applied to the video on the video track... even if the clip on the video track is 'in the middle' to where the transition is on the overlay track. e.g. If I apply a dissolve (or any transition) to the overlay clip... the clip on the video track will go through said transition also. VSX4
In other words, the clip on the video track goes through the transition applied on the overlay or title track.
This does not seem right. I saw nothing in preference that would affect this and I saw no way of 'de-parenting' the video track with the overlay or title track. (By de-parenting I mean separating the tracks so what happens on one does not affect the other.)
View 14 Replies
View Related
Aug 20, 2013
What is the difference between the Video track and the Overlay tracks?
I noticed that I cannot trim the "overlay" clips, but when I added some screen recording to my folder and placed it on the timeline, it automatically goes to the Overlay track. And from there, I cannot trim them as the scissors icon is greyed out. Is there a way to add those clips to the video track instead of the overlay track if there is no other video in the way?
View 13 Replies
View Related
Mar 1, 2012
I am assembling a project with a few video, overlay and audio clips. Everything is timed the way I want, but I decide to add a few seconds to the beginning. I insert the additional clip and all the video clips move over, but all the other clips (overlay and audio) do not move. It takes a long time to adjust everything and get the timing correct again.
Is there anyway to LOCK the audio and overlay clips to their corresponding video, and have them move together when I insert video in the beginning?
View 3 Replies
View Related
