Premiere Pro :: How To Track Time Within The Clip (not Sequence)
Mar 12, 2014
I watched a video clip and I liked everything from, let's say the :30 mark to the minute mark. So, I import it into Premiere. However, when I put it at the end of the next clip, it shows the time for the whole sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) is by avoiding doing the calculation? It's do-able, but seems a little tedious. Would like to "reset the clock" so to speak when working on individual clips within the timeline.
View 2 Replies
ADVERTISEMENT
Apr 17, 2014
I'm new to CC's Mulicam feature, but well versed in the more limited equivalent in FCP. I was delighted with everything about it, until I began actually cutting multicam footage into my sequence.
Whenever I try and overwrite/insert/drag the multicam material into the sequence, it brings in 18 audio tracks- in spite of the fact that my multicam sequences have only 4 audio and 2 video tracks.
No amount of track deselection on the destination sequence works with this.This is going to be a real problem as I add new material into an existing a rough cut, with a 5 track temp mix. how I can specify only 1 or 2 tracks of audio?
I'm running 7.2.2, on OSX 8.5.
PS, Also unable to insert images into this post. Using Chrome Version 34.0.1847.116
View 6 Replies
View Related
Apr 20, 2014
When i try to drag a clip into the sequence, a prompt comes up saying Adobe Premiere Pro has stopped working!
i have a project due in a few weeks and i cant rely on windows movie maker!
I am running it on a HP Probook 450 with Windows 8.1 64 bit.
View 1 Replies
View Related
Mar 14, 2014
I'm running Premiere Pro CS5 on Win7 x64. I have an MP3 audio clip that I've selected a sub-clip from, as you can see here:
When I click on the insert button, everything to the right of the insertion point on the timeline is pushed to the right, as if the clip were inserted, but the clip doesn't show up anywhere (I've scrolled up and down through both the audio and video tracks), as you can see here:
View 6 Replies
View Related
Feb 7, 2014
I know this can't be done at present but it would be great to be able to see both timeline & clip markers as you work through a sequence of subclips. This is for those that get handed a project where the Markers have been spread across both clip & sequence. Even a merge function based on current location would do?
View 3 Replies
View Related
Feb 2, 2014
In Adobe Prem Pro, I'm finishing a short film. All, of a sudden I am bringing over one last clip, and I can't get an audio track. So, if I select a clip and drag it over, only the video shows up.
View 5 Replies
View Related
Mar 1, 2014
Trying to insert a clip on a new timeline form a different sequence in my source monitor. But the audio track does not come through.
I am running the latest CC of Premiere on Windows 8.
View 2 Replies
View Related
Dec 16, 2013
I want to adjust the level of the sound within a clip. I take my pen tool and just add 2 keyframes a few seconds apart from eachother. I adjust the height of the last keyframe, but when I playback NOTHING happends. This is so annoying because it has always worked. I use Premiere Pro 5.5.
View 11 Replies
View Related
Apr 17, 2014
I'm putting together a timelapse movie with about 6K stills. I have them gathered in groups of 600. They're all about 4 megs. I'm taking them into a sequence at 24 fps. Why is my clip coming in at about 6 sec's? Then another group of 600 stills coming in at .04 sec's?
View 7 Replies
View Related
Mar 31, 2014
I'm trying to apply the time remapping settings from my original clips to those that I've colored in DaVinci Resolve. I turned off all effects on my colored clips and graded the entire clip, not just the segment in my original timeline. My workflow thus far has been this:
1) Copy the original clip above the colored clip
2) Revert the speed of the original clip to 100 from where it was adjusted to (the speed of the original clips varies from 500% to 1000% across the timeline)
3) Turn off Time Remapping on the original clips (this is done by deleting all keyframes)
4) Find the In and Out points of the original clip through timecode
5) Set the In and Out points of the colored clip to those of the original
6) Make another copy of the original clip and set it to 100 but don't turn off time remapping
7) Copy the time remapping settings of the original clip to the colored clip
8) Convert the colored clip to the original clip's speed (usually between 500% and 1000%)
Now, in several cases this works, but in others it falls apart at Step 3. When we turn off time remapping, the original clip gets grey stripes over it in the timeline and we cannot see the footage in the Program or Source viewing monitors. We have tried reversing steps 2 and 3, but when we do that the clip gets shrunk down to 1 frame and we lose the original In and Out points.
View 1 Replies
View Related
Feb 20, 2014
Or can I? "Link" is greyed out
View 8 Replies
View Related
Feb 17, 2014
After selecting 2 (or more) files and right clicking and choosing Multi camera sequence from source, I drag the newly created sequence on to the time line but all I get is the two files on the time line stacked over one another. the sequence never gets created.
View 3 Replies
View Related
Mar 27, 2014
Not sure if this is possible, but is there any way to turn a 15 fps clip into a 30 fps clip?
View 3 Replies
View Related
Jan 8, 2012
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies
View Related
May 8, 2012
I can't seem to trim a clip in the overlay track. When I'm scrubbing through it the F3 and F4 keys will not work. This is a clip that I have already used Multi-trim to create.
View 2 Replies
View Related
Jul 14, 2012
I can’t put a border around an overlay track clip once it has been rotated. If I put a boarder around an overlay track clip prior to rotation then it is removed upon rotation.
I use VideoStudio x4.
View 5 Replies
View Related
Feb 7, 2013
Is there any short cut for moving the clip from one track to other(above or below track)?
like we have in FCP.
View 4 Replies
View Related
Jul 23, 2013
In edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?
View 12 Replies
View Related
Jul 22, 2013
Kind of at my wits end with this software. Decided to give it a proper test on a job involving some wire removal and a bit of 3D comping. Every day brings hourly crashes, corrupted sequences, black frame renders, inability to archive projects, on and on. It's like every shot on this project is a minefield of troubleshooting and trying to find workarounds just to get a render complete. I'm spending easily an extra 20 hours a week just trying to overcome problems with the software.
Now I've got a sequence that I literally spent 4 hours on and just trying to open it brings smoke to a hard crash. Trying to make a cfx clip of the sequence takes half an hour to save so I've only been doing that once a day.
Smoke 2013 EXT1
iMac i7 3.4Ghz
NVIDIA GeForce GTX 680MX 2048 MB
32GB RAM
MAC OS X 10.8.3
Promise R6
View 5 Replies
View Related
Oct 27, 2010
Is there a way to show the voice pattern and the clip in video track one. I want to see the voice print, so I can make a cup without cutting off part of a sentence when cut out part of a clip.
View 3 Replies
View Related
May 30, 2013
What would be the short cut key for creating a gap effect of the clip on the track below?
View 4 Replies
View Related
Oct 24, 2012
How do I remove the audio track from a video clip which I am using in a Elements 10 slideshow?
View 4 Replies
View Related
Jul 7, 2012
I recently got a movie file from a client. This file is actually an edited video with straight cut edits. So I dragged this from the bin / media library onto the timeline and proceed to chop up the video according to where the cuts are using ctrl v, like how I usually do in premiere pro. I then selected one of the clips and added color correction to this clip. I found out that all the other clips were being color corrected as well.
I removed every thing and re-started from scratch using the source monitor to mark in and out for every cut. This time it worked properly with just the selected clip being color corrected. Is there any way I can do this like in premiere pro timeline with the razor blade but each clip becomes an individual one?
View 3 Replies
View Related
Dec 10, 2013
I just finnished editing a music video.
It has over 8 video tracks and now I want to export it to a EDL format but It looks like everything needs to go on 1 video track.
View 1 Replies
View Related
Apr 18, 2014
I need to fade a music track in and out but I'm not able to add keyfrmaes with the pen tool. And the Add Keyframe button next to the audio track in sequence is greyed out.
View 5 Replies
View Related
Dec 24, 2013
Win 7. CC7.1...For specific reasons I created a new Project in Premiere CC7.1 and imported a single sequence from a CC project that had a lot of sequences (11)
This worked absolutely perfectly but I was surprised by 2 things ....that I do not recall happening in CS6 or any prior versions. ( I never did this procedure much though)
#1. The assets came in as if project managed. ie. Only the assets the sequence required. In this case a very small sub set of what was in the original project.That was very cool and made for a neat and compact project. I dont recall that in CS6 so if its a feature...I love it.
#2.The assets did not ingest in the new project in the Bin folders carefully named and organised in the original project.Not so cool in the case where one is using source footage with common file names (eg. AVCHD) and not so cool that it needs managing and sorting again.I think I recall assets imported in original folders in CS6 ...albeit...non project managed ie everything??? Part cool and part not!
Do wonder if #2 can be looked at as a possibility for a fix. It would be brilliant please Adobe.I created a new project and imported the sequence ( which was an edit lockdown) specifically for a Direct Link into Speed Grade.
It was an insurance measure in case of any issues that may have arisen. eg a corruption via the DL. workflow.the DL and SG are working on this brilliantly well.
View 2 Replies
View Related
Dec 12, 2013
I'm trying to export a sequence as XML, but no matter what I try, it exports the wrong sequence. I've tried selecting the sequence in the project panel, then hitting export, and I've also tried opening the timeline and exporting from there.
The sequence being exported is actually used at one point in the sequence I want to export, otherwise I would just delete it temporarily. I'm using Premiere CC 7.2.
View 6 Replies
View Related
Feb 6, 2014
Using CS6 Premiere Pro in Windows with the intent of making a DVD of the movie,how do I choose the Preset descriptions in the "New Sequence" screen? I assume I'm going to choose an AVCHD version, but don't have any idea what the differences are.
View 2 Replies
View Related
Sep 28, 2011
Ok, so I'm in the project panel, right? Minding my own buiz and doing what I do. I want to rename a sequence that I've instinctively named "fat chick" because, well, uh, she was a bit heavy (and in a bikini). Well, now I need to show the "fat chick" that's paying me what her sequence looks like. So I want to change "fat chick" to "cute lady" so she's happy. But guess what? I can right-click and hit rename, but I never get further than that. I can't rename it. So I had to show her the sequence and hope she'd only see the video, not the name of the sequence.
What's weird is I can rename a whole bunch of other sequences, but the other half of the time I can't. Oh, I can rename it if it's sitting in the timeline of another sequence... but it only changes it there in the timeline. (I've posted on this before I realize this is a limitation in Premiere). But this is different. I want to rename sequences from the project panel but can't.
Now she's all mad at me and threatening a lawsuit becaue I hurt her feelings, yada, yada. It's a disaster... all this because I couldn't change the sequence name.
Ok, so the story's made up, but the renaming problem is true. Is this a bug? How can I rename sequences when they don't want to be renamed and are perfectly satisfied with the first name I gave them?
View 11 Replies
View Related
Dec 4, 2013
I lost a sequence in Adobe Premiere Pro CC. I was going to export a new sequence I created in a project. While I was doing it, the PC crashed.When I restarted premiere, my updated project file was gone and only an older version opened, where all my work was missing.
View 2 Replies
View Related
Jul 11, 2010
I just came over from Sony Vegas Pro 9 (which kicks ***, but has bad native support for DSLR files).
In Vegas you can apply effects to video in three ways:
1. A whole clip in the project media bin (automatically applying such effects to all timeline events using this clip).
2. Individual timeline events.
3. Entire video tracks (automatically applying such effects to every clip on the track).
Is this possible in Premiere CS5? I find it hard to believe that it's not possible since it is such a useful thing to do. For example, what if you have a bunch of footage that you want to look grainy but you don't want to apply the same effect to every timeline event from the clips because it is time consuming and creates many sources of change if you want to tweak the effect settings?
View 20 Replies
View Related
