Premiere Pro :: Can't Change The Volume Of The Sound Over Time Within A Clip

Dec 16, 2013

I want to adjust the level of the sound within a clip. I take my pen tool and just add 2 keyframes a few seconds apart from eachother. I adjust the height of the last keyframe, but when I playback NOTHING happends. This is so annoying because it has always worked. I use Premiere Pro 5.5.

View 11 Replies


ADVERTISEMENT

VideoStudio :: No Sound From Clip Mode At Default 100% Volume

Dec 7, 2012

Is it by design that I cannot hear sound from videoclips played in "clip" mode when the volume is set to 100% ? I can hear the sound OK when the volume is changed to anything other than 100%, like 101% or 99%. By the way I can hear the sound OK when played in Project mode at 100%, just not in clip mode at 100%. This is very annoying as I need to change the volume of each clip to hear it. Product is VS-X5 digital purchase. video clips are from Leica Dlux-5 foto camera, which is basically a panasonic inside (avcdh lite 720p)

View 7 Replies View Related

Premiere Pro :: How To Track Time Within The Clip (not Sequence)

Mar 12, 2014

I watched a video clip and I liked everything from, let's say the :30 mark to the minute mark. So, I import it into Premiere. However, when I put it at the end of the next clip, it shows the time for the whole sequence. Now, I know that I can do the math, but is there a way to show where the 30 second mark (in this example) is by avoiding doing the calculation? It's do-able, but seems a little tedious. Would like to "reset the clock" so to speak when working on individual clips within the timeline.

View 2 Replies View Related

Premiere Pro :: Uploading Stills Giving Odd Clip Length For Time Lapse?

Apr 17, 2014

I'm putting together a timelapse movie with about 6K stills.  I have them gathered in groups of 600.  They're all about 4 megs.  I'm taking them into a sequence at 24 fps.  Why is my clip coming in at about 6 sec's?  Then another group of 600 stills coming in at .04 sec's?

View 7 Replies View Related

Premiere Pro :: Turn Off Time Remapping - Original Clip Gets Grey Stripes Over It?

Mar 31, 2014

I'm trying to apply the time remapping settings from my original clips to those that I've colored in DaVinci Resolve. I turned off all effects on my colored clips and graded the entire clip, not just the segment in my original timeline.  My workflow thus far has been this:
 
1) Copy the original clip above the colored clip

2) Revert the speed of the original clip to 100 from where it was adjusted to (the speed of the original clips varies from 500% to 1000% across the timeline)

3) Turn off Time Remapping on the original clips (this is done by deleting all keyframes)

4) Find the In and Out points of the original clip through timecode

5) Set the In and Out points of the colored clip to those of the original

6) Make another copy of the original clip and set it to 100 but don't turn off time remapping

7) Copy the time remapping settings of the original clip to the colored clip

8) Convert the colored clip to the original clip's speed (usually between 500% and 1000%)
 
Now, in several cases this works, but in others it falls apart at Step 3.  When we turn off time remapping, the original clip gets grey stripes over it in the timeline and we cannot see the footage in the Program or Source viewing monitors.  We have tried reversing steps 2 and 3, but when we do that the clip gets shrunk down to 1 frame and we lose the original In and Out points.

View 1 Replies View Related

VideoStudio :: Sound On Clip But No Sound On Project?

Oct 26, 2010

Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.

View 3 Replies View Related

Premiere Pro :: Control (monitor) Volume Using Computer Volume Controls

Feb 4, 2014

I'm no longer able to control the PP (monitor) volume using my computer volume controls. I've always controlled the monitor volume using my computer volume levels, but starting today, that has changed.
 
The volume is just playing at the level recorded with no way for me to turn down or up.I performed a disc repair and that didn't solve the problem.

View 1 Replies View Related

VideoStudio :: Sound Volume On Blu-ray Menu

Sep 12, 2013

I have recently been burning my videos to Blu Ray disks using VS Ultimate X6. Once I have rendered my video project I select the "burn to disk" option and create chapter menus etc and apply a music soundtrack to the menu. I generally create a BDMV file so I can store a back up copy on my media centre. I then build and burn to Blu Ray disk using ImgBurn. All works like a treat however when I play the disk the menu audio is way too loud such that on one occasion it has overloaded my sound system and caused auto shut down. Is there any way to adjust / reduce the volume of the menu audio or normalise it to the rest of the audio on the disk. I have not had any similar issues in the past creating an .ISO file and then burning the DVD.

View 1 Replies View Related

VideoStudio :: X5 Sound Mixer - Volume Control

Feb 19, 2013

why I'm having trouble with VSX5 Pro's "Sound Mixer?" It isn't working, and I don't know if my issue is one that has been reported already, or not. In my timeline (under 'voice track') I have an audio file which I separated from the main video file. The main video file is now 'muted' so that only my voice track plays the sounds. Note: I copied the same voice track and pasted 3 copies of it only to lengthen the overall playtime, but they are each on the same voice track.

The problem I'm having is that the volume adjustment settings don't work. After selecting the first segment on my voice track, I then move the slider up to maximum volume (from level 0 to 12), and then I right-click on it to save it as "default," but it ALWAYS jumps back to volume level zero (0)! It does the same thing even if I don't "right-click" and save it. The setting never stays where I want it to. What else can I do to increase the volume of the sounds on my 3 segments in my voice track, and have them stay at level 12?

EDITED: Also, is there some way I can save/export my "voice track" to an external sound file and/or convert it into a different sound format? I haven't seen a way to do that.

View 2 Replies View Related

Premiere Pro :: Turn 15 Fps Clip Into 30 Fps Clip Through Adobe?

Mar 27, 2014

Not sure if this is possible, but is there any way to turn a 15 fps clip into a 30 fps clip?

View 3 Replies View Related

VideoStudio :: X5 - Audio View To Adjust Sound Volume?

Aug 8, 2012

After staying away from video editing for some time I have just installed VS X5. But here I can't find the Audio View in which I could adjust the sound volume (using the graph) in the video track. Has it gone away or is it just that I can't find it?

Does this mean that I have to split the audio from the video to be able to adjust the volume (up and down at various places, not just the track volume).

View 2 Replies View Related

Lightroom :: Can Use (edit In) To Move Video Clip To Premiere Or Premiere Elements

Jan 8, 2012

Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?

View 17 Replies View Related

VideoStudio :: Share Step Intro Screen Sound Volume Level?

Mar 24, 2011

I have been meaning to ask this question when using previous versions but forgot so here goes Now using ProX4 (boxed upgrade) and it has the same prob as with previous versions namely that when on the Share step and adding a music file to one of the Gallery intro scenes I have not found any way to control the volume of that sound as it blares out LOUD on preview and in the final DVD video. If the viewer of the DVD video subsequently lowers that sound level then the sound level is too low for the following video. I have made a sound file at the sound level I need but even that is ignored and the sound on the intro screen is LOUD again. Corel Support advised me that I can adjust the volume when in the preview prior to butning but that does not affect the level on the final DVDF.

View 14 Replies View Related

VideoStudio :: X4 - Adding Sound To A Clip?

Aug 9, 2012

I am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.

I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.

View 5 Replies View Related

VideoStudio :: Clip Sound Temporarily Gone?

Feb 16, 2013

Using X5 Ultimate Using the Edit function tab, and with several clips in the timeline, selecting one, then choosing clip mode and playing the clip in the view panel happily provides the clip embedded sound too. But occasionally, it doesn't. Generally after doing something related, eg today, I was recording a voiceover file to go with a clip, and when finished I just played the clip in clip mode - and just got images, but not the sound which is embedded in the clip (don't expect to hear the voiceover in that configuration). When it happens, I can get the sound embedded in the clip back by:

- choosing project mode, then playing the clip section; or

- changing the function tab to share, then back to edit, and then playing the clip; or

- saving the project file, closing X5 and then reopening both X5 and the same project file, and playing the clip.

Like, the control(s) that manage clip sound in the clip mode, play, seem to get "lost" during some edit functions and require a serious elbow jog to get back together.

Is there a control setting that prevents it happening in the first place?

View 2 Replies View Related

VideoStudio :: Movie Clip Sound Not Playing In X4?

Jul 1, 2012

The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.

When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.

I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.

why the clips are not playing the audio?

View 2 Replies View Related

VideoStudio :: Sound When Playing Clip In Overlay Track?

Jul 23, 2013

In edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?

View 12 Replies View Related

VideoStudio :: Sound On Some Clip Muted When Project Exported

Nov 21, 2011

I used many clips capture from a Sony HD Camorder. Everything's working fine in Video Studio when I do a preview of my project.

My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back. I tried to slip the sound from the clip, remove the transition, nothing work.

I updated all the drivers...I tried on an other computer...still the problem.

View 1 Replies View Related

VideoStudio :: When Clip Begin Sound Is Muted For About 7-8 Seconds

Nov 7, 2011

I used many clips capture from a Sony HD Camorder.Everything's working fine in VideoStudio when I do a preview of my project.

My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back.I tried to slip the sound from the clip, remove the transition, nothing work.

View 4 Replies View Related

AutoDesk Smoke :: How To Insert / Add A Clip On Timeline Without Its Sound

May 9, 2013

There is any simple method to insert/add a clip on timeline without its sound? I know the methods of locking the audio track in the sequence or deleting the audio track of the clip but I'd like to have some simple shortcut like Option+drag or something similar. There is any?

View 1 Replies View Related

Photoshop Elements :: No Sound When Playing Back Clip?

Dec 3, 2012

no sound when playing back clip

View 3 Replies View Related

VideoStudio :: Adjusting Music Clip Volume On Menu?

Feb 24, 2013

adjusting the music clip volume on a menu.....I see that you can adjust the duration and fadein/out but not a volume adjustment.

View 2 Replies View Related

VideoStudio :: Find Clip Audio Volume Control?

Apr 2, 2012

I've just bought VideoStudio Pro X4 and I want to mute the sound on my clips as I'm going to have music playing instead. On page 115 of the manual it says I will find the clip volume control in the Music and Voice tab. I have been all over the program interface and clicked on virtually everything but I cannot find a Music and Voice tab. In the end I had to split the audio for each clip and delete it. how to find the Clip audio volume control?

View 2 Replies View Related

VideoStudio :: X5 - Editing Volume Difference Between PROJECT And CLIP Play

Aug 16, 2012

I purchased VideoStudio X5 for HD editing of .MTS clips from my Panasonic HS700 video camera. I transfer the clips to my hard drive using explorer and then use the X5 program to bring them into the library and then to the timeline. Due to my volume problem I re-downloaded VSX5, reinstalled it and installed SP1 patch, updated my Video Card Driver to the latest, updated Direct X and made sure my Microsoft Updates are all up to date.

My Volume problem is, during the editing proces you use both the Project playback and also individual clip playback. Without any manual changes to clip volume, when I play an individual clip the volume is substatially higher than when I play the project over the same clip area. This is annoying to me and those nearby. Earlier versions of VS did not do this.

If I change the individual clip volume up or down from 100% then when I play either the project or individual clip the volume remains the same (ie.it is no longer louder in clip mode).

View 3 Replies View Related

Premiere Pro :: CS6 - No Sound

Feb 17, 2014

I am having a problem with Premiere Pro CS6. It opens and imports files. The audio mixer shows the audio but there is no sound coming through.

View 1 Replies View Related

VideoStudio :: No Sound On Clip In Rendered Project Via Create Disk Image?

Aug 29, 2012

Using X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.

But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.

View 14 Replies View Related

After Effects :: Imported A Clip From Imovies And Cannot Play Back The Sound In Preview

Aug 25, 2013

I have imported a clip from imovies and cannot play back the sound in preview. What have I done wrong?

View 3 Replies View Related

Premiere Pro :: Video Appearing As A Sound

Feb 5, 2014

When i upload my video clips they appear as an "audio" and just sound and not a video clip.

View 2 Replies View Related

Premiere Pro :: Adobe Won't Export Sound

Jan 30, 2014

I am trying to export a video I have created, so that I can put it on youtube. The problem is, whenever I export it, it exports the voice over, but not the background music.

View 3 Replies View Related

Premiere Pro :: Imported Video Files Without Sound?

Feb 19, 2014

if I export a sequence from the timeline and have it imported into the project it only imports the film but without any sound. With some codec I can play the clip as it should be in the windows 7 ultimate explorer but I sometimes also get automatically a HD-file and the sound files as way as a separate thing. I never had that before. In fact what I want to do is to create a sequence from my timeline and have that as a separate HD-file to use whereever in the project. Especially if the sound is not the original one but added by myself. I have done that before and I would just get my HD-file and could play it in the preview WITH sound. Now all I get is the picture but .... like I said: without sound. That is not normal. So is that a rather useless update or a failure in the program?

And how can I copy a sequence from a timeline and place it anywhere else on the timeline. Used to be so easy in a previous premiere version. Now copy and paste does not work at all anymore. And whenever I want to add a clip onto a layer, I have to shut all used layers, because otherwise the sound goes anywhere but where it should and might just place itself within another sound-layer.Used to be all much better and simpler in previous editions.

View 3 Replies View Related

Premiere Pro :: Sound Settings Through Black Magic In PR?

Feb 3, 2014

I have a black magic and have problems setting the sound properly in PR to get the sound out through the black magic. Although settings seem to have been done properly, there is no sound coming out. When I start the setting again, most of the time the settings have automatically changed and are not on the black magic anymore.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved