VideoStudio :: No Sound From Clip Mode At Default 100% Volume
Dec 7, 2012
Is it by design that I cannot hear sound from videoclips played in "clip" mode when the volume is set to 100% ? I can hear the sound OK when the volume is changed to anything other than 100%, like 101% or 99%. By the way I can hear the sound OK when played in Project mode at 100%, just not in clip mode at 100%. This is very annoying as I need to change the volume of each clip to hear it. Product is VS-X5 digital purchase. video clips are from Leica Dlux-5 foto camera, which is basically a panasonic inside (avcdh lite 720p)
View 7 Replies
ADVERTISEMENT
Dec 16, 2013
I want to adjust the level of the sound within a clip. I take my pen tool and just add 2 keyframes a few seconds apart from eachother. I adjust the height of the last keyframe, but when I playback NOTHING happends. This is so annoying because it has always worked. I use Premiere Pro 5.5.
View 11 Replies
View Related
Oct 26, 2010
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies
View Related
Sep 12, 2013
I have recently been burning my videos to Blu Ray disks using VS Ultimate X6. Once I have rendered my video project I select the "burn to disk" option and create chapter menus etc and apply a music soundtrack to the menu. I generally create a BDMV file so I can store a back up copy on my media centre. I then build and burn to Blu Ray disk using ImgBurn. All works like a treat however when I play the disk the menu audio is way too loud such that on one occasion it has overloaded my sound system and caused auto shut down. Is there any way to adjust / reduce the volume of the menu audio or normalise it to the rest of the audio on the disk. I have not had any similar issues in the past creating an .ISO file and then burning the DVD.
View 1 Replies
View Related
Feb 19, 2013
why I'm having trouble with VSX5 Pro's "Sound Mixer?" It isn't working, and I don't know if my issue is one that has been reported already, or not. In my timeline (under 'voice track') I have an audio file which I separated from the main video file. The main video file is now 'muted' so that only my voice track plays the sounds. Note: I copied the same voice track and pasted 3 copies of it only to lengthen the overall playtime, but they are each on the same voice track.
The problem I'm having is that the volume adjustment settings don't work. After selecting the first segment on my voice track, I then move the slider up to maximum volume (from level 0 to 12), and then I right-click on it to save it as "default," but it ALWAYS jumps back to volume level zero (0)! It does the same thing even if I don't "right-click" and save it. The setting never stays where I want it to. What else can I do to increase the volume of the sounds on my 3 segments in my voice track, and have them stay at level 12?
EDITED: Also, is there some way I can save/export my "voice track" to an external sound file and/or convert it into a different sound format? I haven't seen a way to do that.
View 2 Replies
View Related
Aug 8, 2012
After staying away from video editing for some time I have just installed VS X5. But here I can't find the Audio View in which I could adjust the sound volume (using the graph) in the video track. Has it gone away or is it just that I can't find it?
Does this mean that I have to split the audio from the video to be able to adjust the volume (up and down at various places, not just the track volume).
View 2 Replies
View Related
Aug 9, 2012
I am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.
I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.
View 5 Replies
View Related
Feb 16, 2013
Using X5 Ultimate Using the Edit function tab, and with several clips in the timeline, selecting one, then choosing clip mode and playing the clip in the view panel happily provides the clip embedded sound too. But occasionally, it doesn't. Generally after doing something related, eg today, I was recording a voiceover file to go with a clip, and when finished I just played the clip in clip mode - and just got images, but not the sound which is embedded in the clip (don't expect to hear the voiceover in that configuration). When it happens, I can get the sound embedded in the clip back by:
- choosing project mode, then playing the clip section; or
- changing the function tab to share, then back to edit, and then playing the clip; or
- saving the project file, closing X5 and then reopening both X5 and the same project file, and playing the clip.
Like, the control(s) that manage clip sound in the clip mode, play, seem to get "lost" during some edit functions and require a serious elbow jog to get back together.
Is there a control setting that prevents it happening in the first place?
View 2 Replies
View Related
Mar 24, 2011
I have been meaning to ask this question when using previous versions but forgot so here goes Now using ProX4 (boxed upgrade) and it has the same prob as with previous versions namely that when on the Share step and adding a music file to one of the Gallery intro scenes I have not found any way to control the volume of that sound as it blares out LOUD on preview and in the final DVD video. If the viewer of the DVD video subsequently lowers that sound level then the sound level is too low for the following video. I have made a sound file at the sound level I need but even that is ignored and the sound on the intro screen is LOUD again. Corel Support advised me that I can adjust the volume when in the preview prior to butning but that does not affect the level on the final DVDF.
View 14 Replies
View Related
Jul 1, 2012
The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
View 2 Replies
View Related
Jul 23, 2013
In edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?
View 12 Replies
View Related
Nov 21, 2011
I used many clips capture from a Sony HD Camorder. Everything's working fine in Video Studio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back. I tried to slip the sound from the clip, remove the transition, nothing work.
I updated all the drivers...I tried on an other computer...still the problem.
View 1 Replies
View Related
Nov 7, 2011
I used many clips capture from a Sony HD Camorder.Everything's working fine in VideoStudio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back.I tried to slip the sound from the clip, remove the transition, nothing work.
View 4 Replies
View Related
Feb 24, 2013
adjusting the music clip volume on a menu.....I see that you can adjust the duration and fadein/out but not a volume adjustment.
View 2 Replies
View Related
Apr 2, 2012
I've just bought VideoStudio Pro X4 and I want to mute the sound on my clips as I'm going to have music playing instead. On page 115 of the manual it says I will find the clip volume control in the Music and Voice tab. I have been all over the program interface and clicked on virtually everything but I cannot find a Music and Voice tab. In the end I had to split the audio for each clip and delete it. how to find the Clip audio volume control?
View 2 Replies
View Related
Aug 16, 2012
I purchased VideoStudio X5 for HD editing of .MTS clips from my Panasonic HS700 video camera. I transfer the clips to my hard drive using explorer and then use the X5 program to bring them into the library and then to the timeline. Due to my volume problem I re-downloaded VSX5, reinstalled it and installed SP1 patch, updated my Video Card Driver to the latest, updated Direct X and made sure my Microsoft Updates are all up to date.
My Volume problem is, during the editing proces you use both the Project playback and also individual clip playback. Without any manual changes to clip volume, when I play an individual clip the volume is substatially higher than when I play the project over the same clip area. This is annoying to me and those nearby. Earlier versions of VS did not do this.
If I change the individual clip volume up or down from 100% then when I play either the project or individual clip the volume remains the same (ie.it is no longer louder in clip mode).
View 3 Replies
View Related
May 2, 2011
All the avi's (divx and xvid codec) that i load and put in the timeline have no sound in project mode. When i make a output file there is also no sound in the .avi. When i select a clip in the timeline there is sound....I Have updated divx and xvid. Using WIndows 7 32 bit pro and Videostudio X4.
View 2 Replies
View Related
Aug 29, 2012
Using X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.
But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.
View 14 Replies
View Related
Mar 7, 2013
In VS Pro 4, in edit mode, I get no sound when I play the project but sound is OK when I play the clip. Then if I switch on the sound mixer I get sound when I play the project.
View 14 Replies
View Related
Jun 20, 2011
I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.
View 4 Replies
View Related
Jan 16, 2011
I'm a long time user of Videostudio Pro all the way back to Media Studio Pro 6. I recently purchased VideoStudio Pro X3. I am working with HD video from a Samsung HMX-H200. The MP4 files were moved to my computer directly from the SDHC card. The format of the files is 1080i. I believe the camera records at 60 fps, but in VSP it is reported as 29.97.
The problem is as follows... I can load a clip on the timeline and play it in project mode, but if I try to play it in clip mode, the preview window goes black and stays this way until I press the stop button. Even stranger is I can scrub through the clip just fine in clip mode.
I have tried both SP2 patches. I have applied the latest Direct X updates. I have re-installed VSP. I tried this with Smart Proxy on and off. I've tried several other system wide optimizations like like cleaning the registry. No luck.
View 4 Replies
View Related
Dec 27, 2011
X4. I created a 48hz sample rate 24 bit WAV file on my portable Tascam recorder.. I am creating a sales presentation for my invention. I have brought in many different videos I created on my camera and have edited them successfully with single clip and multi clip. Also have been able to split audio out of video. adjust sections using the nodes with the sound mixer.. move audio after split to different areas on the timeline.. However I need to do some voice over work. I figured it would be much easier and better quality for me to use my tascam to create the wav's and then just drop them into the project, edit them and place them where I want them, mute the voice I have on the video..
I was able to bring the .wavs in just fine.. and while editing them in clip mode they play just fine, I can shorten them or cut them where I need too. But when I choose to play back the project with the .wav in one one of the additional sound/music tracks I get very nasty static only. None of my recorded voice is audible. click to clip mode on the wav audio and it plays perfect. I tried moving it to the voice over track area and same exact problem.
am I missing a switch function somewhere? I made sure I muted the video clips above the .wav in the timeline. The manual says to use import option to bring in audio files but I do not see an import button anywhere? missing something? seems to me the drag and drop or add to library a wave file should work.. ??
View 2 Replies
View Related
Apr 1, 2011
If I have project properties set to anything but the default, I am unable to scrub through a clip when in clip mode if the clip has the second icon indicator, as shown in the screen grab below. This second icon (double diagonal frames) does not appear immediately. Before it appears, I can scrub in clip mode, but after it appears, I cannot. What that icon represents? My video files are from Canon HV20 (m2t 1440x1080) and my project properties match them.
I have a suspision that it has something to do with proxy files, and that once the proxy file is made, I lose clip scrubbing.
I just tried turning off smart proxy, and wouldn't you know it, I can scrub in clip mode.
I restarted X4 and clip scrubbing is fine. I enabled Smart Proxy, and clip scrubbing doesn't work again.
View 3 Replies
View Related
May 9, 2013
There is any simple method to insert/add a clip on timeline without its sound? I know the methods of locking the audio track in the sequence or deleting the audio track of the clip but I'd like to have some simple shortcut like Option+drag or something similar. There is any?
View 1 Replies
View Related
Dec 3, 2012
no sound when playing back clip
View 3 Replies
View Related
Aug 25, 2013
I have imported a clip from imovies and cannot play back the sound in preview. What have I done wrong?
View 3 Replies
View Related
Oct 11, 2011
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies
View Related
Mar 4, 2012
Every time that I open a new drawing which has clipped XRefs, the X clip frame is set to the number 2, and I set it back to number "0", but then when I finish that drawing and open another drawing, then the new drawing reverts back to X clip frame 2.
How or where I can change the setting to the default is always "0"?
View 6 Replies
View Related
Oct 2, 2013
I have recently completed a new project and made a video file (using the DVD option). This video file plays perfectly with media player etc., but when I the burn a DVD from the file all I get is the pictures with no sound.
I am using VS Pro x4 ultimate - what I am missing (apart from the sound! )
View 4 Replies
View Related
Dec 16, 2012
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...
View 1 Replies
View Related
Jun 7, 2011
Suddenly Pro X3 will no longer play audio.
I import any mpg file which are known to have sound and when i ty to play it there is no audio at all from Pro X3. This has been working all along and it just seems to have stopped. I have made sure of the obvious things.We get sound from other apps so the computer and speakers are fine. I have checked the sound icon from within Pro X3 and it is turned up to max.
View 1 Replies
View Related
