VideoStudio :: Samsung MP4 Won't Play In Clip Mode
Jan 16, 2011
I'm a long time user of Videostudio Pro all the way back to Media Studio Pro 6. I recently purchased VideoStudio Pro X3. I am working with HD video from a Samsung HMX-H200. The MP4 files were moved to my computer directly from the SDHC card. The format of the files is 1080i. I believe the camera records at 60 fps, but in VSP it is reported as 29.97.
The problem is as follows... I can load a clip on the timeline and play it in project mode, but if I try to play it in clip mode, the preview window goes black and stays this way until I press the stop button. Even stranger is I can scrub through the clip just fine in clip mode.
I have tried both SP2 patches. I have applied the latest Direct X updates. I have re-installed VSP. I tried this with Smart Proxy on and off. I've tried several other system wide optimizations like like cleaning the registry. No luck.
View 4 Replies
ADVERTISEMENT
Jun 27, 2011
Video Studio X4
Is there anyway to play a clip backward? Tried looking special effects did not see it. Have footage of a person running into a pool, I'm trying do a one two one two effect before they go in.
View 1 Replies
View Related
Aug 16, 2012
I purchased VideoStudio X5 for HD editing of .MTS clips from my Panasonic HS700 video camera. I transfer the clips to my hard drive using explorer and then use the X5 program to bring them into the library and then to the timeline. Due to my volume problem I re-downloaded VSX5, reinstalled it and installed SP1 patch, updated my Video Card Driver to the latest, updated Direct X and made sure my Microsoft Updates are all up to date.
My Volume problem is, during the editing proces you use both the Project playback and also individual clip playback. Without any manual changes to clip volume, when I play an individual clip the volume is substatially higher than when I play the project over the same clip area. This is annoying to me and those nearby. Earlier versions of VS did not do this.
If I change the individual clip volume up or down from 100% then when I play either the project or individual clip the volume remains the same (ie.it is no longer louder in clip mode).
View 3 Replies
View Related
Jun 20, 2011
I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.
View 4 Replies
View Related
Dec 27, 2011
X4. I created a 48hz sample rate 24 bit WAV file on my portable Tascam recorder.. I am creating a sales presentation for my invention. I have brought in many different videos I created on my camera and have edited them successfully with single clip and multi clip. Also have been able to split audio out of video. adjust sections using the nodes with the sound mixer.. move audio after split to different areas on the timeline.. However I need to do some voice over work. I figured it would be much easier and better quality for me to use my tascam to create the wav's and then just drop them into the project, edit them and place them where I want them, mute the voice I have on the video..
I was able to bring the .wavs in just fine.. and while editing them in clip mode they play just fine, I can shorten them or cut them where I need too. But when I choose to play back the project with the .wav in one one of the additional sound/music tracks I get very nasty static only. None of my recorded voice is audible. click to clip mode on the wav audio and it plays perfect. I tried moving it to the voice over track area and same exact problem.
am I missing a switch function somewhere? I made sure I muted the video clips above the .wav in the timeline. The manual says to use import option to bring in audio files but I do not see an import button anywhere? missing something? seems to me the drag and drop or add to library a wave file should work.. ??
View 2 Replies
View Related
Dec 7, 2012
Is it by design that I cannot hear sound from videoclips played in "clip" mode when the volume is set to 100% ? I can hear the sound OK when the volume is changed to anything other than 100%, like 101% or 99%. By the way I can hear the sound OK when played in Project mode at 100%, just not in clip mode at 100%. This is very annoying as I need to change the volume of each clip to hear it. Product is VS-X5 digital purchase. video clips are from Leica Dlux-5 foto camera, which is basically a panasonic inside (avcdh lite 720p)
View 7 Replies
View Related
Apr 1, 2011
If I have project properties set to anything but the default, I am unable to scrub through a clip when in clip mode if the clip has the second icon indicator, as shown in the screen grab below. This second icon (double diagonal frames) does not appear immediately. Before it appears, I can scrub in clip mode, but after it appears, I cannot. What that icon represents? My video files are from Canon HV20 (m2t 1440x1080) and my project properties match them.
I have a suspision that it has something to do with proxy files, and that once the proxy file is made, I lose clip scrubbing.
I just tried turning off smart proxy, and wouldn't you know it, I can scrub in clip mode.
I restarted X4 and clip scrubbing is fine. I enabled Smart Proxy, and clip scrubbing doesn't work again.
View 3 Replies
View Related
Aug 7, 2011
I've several hundred video clips from my Samsung R10 HD camcorder ( H264 - 1080 25 fps) that I wish to link into one continuous file. I'm not bothered about transisitons or any other editing.
Ideally, I would prefer it to be lossless, but when the clips are placed into X3, it appears they have to be rendered. However, if I'm forced to re render, I cant find a 1080 H264 setting in MP4 format with 25 fps?
View 14 Replies
View Related
Jul 19, 2012
How to make the Clip play from last frame to first frame?
View 3 Replies
View Related
Dec 25, 2013
In Premiere Pro CC, if I have previously set an in and out point in my source monitor, the spacebar plays clips from the in point only. I'd rather be able to move my CTI to any place in my clip, hit spacebar, and play from there but it always snaps to the in point and plays from there.
The play around shortcut is a joke because it doesn't play from the playhead location and loops at seemingly random intervals.
View 4 Replies
View Related
Aug 25, 2013
I have imported a clip from imovies and cannot play back the sound in preview. What have I done wrong?
View 3 Replies
View Related
Oct 11, 2011
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies
View Related
Sep 16, 2013
When I double click on the video downloaded from NikonD7100 in Library mode in lightroom 5 it will not play. I have windows 8..
View 1 Replies
View Related
Nov 19, 2013
Why doesn't the slideshow start button in Library mode play the selected music?
View 1 Replies
View Related
Aug 18, 2012
I have been editing video with Pro x3 for a while and have not had this problem unti just recently. My computer died and had to be reinstalled (windows 7 ult). When I import flv files they play but are blank. I have tried a couple of things but none work.
View 3 Replies
View Related
Nov 17, 2012
I'm making some music videos, and I thought I'd get the best audio quality using .WAV files instead of MP3 files. Trouble is, when I load a .WAV into my audio track, all I get is a bunch of noise and loud hiss. An MP3 file works just fine. If I play the "clip" in the preview window, each file will play just fine, but the problem shows itself when I play the "project" in the preview window. Is this happening because my computer has choked on all the data, and it's too much for it to handle? Am I stuck with using the MP3 files in my projects?
View 9 Replies
View Related
Apr 3, 2012
All of a sudden my Videostudio X4 will not play any clip for longer then a second or two. When you play a clip or the project it plays for 1 or 2 seconds and stops just like you hit the stop or pause button. Click play again and it does the same thing. Makes it really impossible to edit. It had been working great up until last week. I tried uninstalling and reinstalling but still have the same problem. I have excluded my anti virus from scanning the Corel folder.
View 1 Replies
View Related
May 22, 2013
I have found that the program Videostudio x5 does not play MPG formats.
When using SHARE-Custom-MPG the program renders the video, then displays a general error message and closes the program.
It seems to play AVI, MOV, MP4, WMV, Webm, UIS formats.
Other players work - ie. VLC , Media Player Classic and DIV-X. A black screen is shown in WIN DVD silver.
I have loaded H-Lite 9.90 , FFDSHOW and Windows 8 codecs, but this made no difference.
I have downloaded and installed Videostudio X6 as a trial, but this made no difference either
This is the event log
Event Viewer General
Faulting application name: vstudio.exe, version: 15.0.0.0, time stamp: 0x5149e750
Faulting module name: uvHTMPEG2.dll, version: 0.0.0.0, time stamp: 0x514a04a0
Exception 0xc0000005
[Code]...
View 7 Replies
View Related
Oct 21, 2013
I have an SD Pioneer dvd player...model dv-49av. It plays all commercial DVD fine, but never a DVD I burn from VS. However, any DVD I burn from Corel plays perfectly in my Pioneer 23fd bluray player.
Anything I can do to change this? The disk type (-r, +r etc.) doesn't matter and the DVD that won't play plays fine on the computer. The disk loads fine, but when I select play the video or chapter it just locks up and I have to restart the player.
View 14 Replies
View Related
May 17, 2011
Having produced my first video production on VS4 I made several copies on DVD but I have been unable to get any of those DVD copies to play properly on most DVD players. They all behave differently on on Different players, on some players they won't even start, some will start and play part of the way through before playing up. All copies behave differently on different players. I have been able to get most copies to play properly on my computer.
View 1 Replies
View Related
Aug 25, 2012
...adding effects in VS x5 pro. I just downloaded the trial after upgrading to a new laptop running windows 7 and was told I could not use my videostudio 11 or moviefactory 6 plus. So I have video that I imported from my SDHC card in high def, it played fine until I started adding a crossfade and a couple of slow motions. Now, every video had no sound. I have tried deleting them and bring them back in, but still no sound. It will play music over the tracks, but I have lost all my original sound. I thought I would be able to add some music and lower the original soundtrack at certain points, letting it fade in and fade out, allowing for the original audio to play through and along with the music. I am pretty dissapointed right now and need some answers. Also what happened to the moving menus? I am confused with the templates as well... begininng, middle end or complete. Is that instead of moving menus? Can I not make a moving thumbnail menu with music and chapters?
View 10 Replies
View Related
Dec 6, 2011
I have been creating a project for some time which contains a lot of video clips.Every now and then I position the 'scrubber' mid way along and click on the 'play' button to check what the effect is at the place I am editing.
Today after adding some more video clips to the end of the project and editing them when I place the 'scrubber' where the clips are that I have been editing and click on 'play' to see the effect instead of VS 'paying' my video from the position the scrubber was placed at it moves the scrubber to the start of the project and plays from the beginning. It was not doing that yesterday (I have added some more clips to the end of the project since then and editing them).This is VERY annoying as I cannot check to see what parts of the movie (project) look like without playing from the start of the project (30 minutes in length).
View 4 Replies
View Related
Jan 14, 2012
I download avi files and then edit them in Videostudio X4. THe avi's are always from different resolutions and framerate.
When i play the converted or edited avi files on my mediaplayer on a Widescreen tv then the video is played may time not full screen. Sometimes it is on top and sides filled with black borders.
I would like the video's always be full screen on tv (off course with good quality).
My question is: how can i see in Videostudio if the video can be played full screen on tv?
Let's say i have 2 video's: divx / xvid 576 x 320 at 25.000 fpsec and 512 x 384 at 188.900 at 25.000 frames per second. Would these files be played full screen on the tv?. How can i calculate that it is 4:3 or 16:9 and what must the preference be in Video studio itself: 16:9 or 4:3?
View 1 Replies
View Related
May 25, 2012
I'm trying to create a blu-ray movie that contains AVCHD videos of various vacations that I've been on over the past year (just your typical collection of home movies), but I've had problem after problem in trying to create the damn thing. I've used VS Pro X4 to create four individual movies (representing four different vacations, each saved as vsp files); I then created my "menu file" to compile all four movies into a single blu-ray with each one having menu buttons that then go to chapter sections. Then, due to VSX4 never completing a successful burn, I simply had it create the Blu-Ray folders and then used ImgBurn to burn them to disc.
ANYWAYS, what kind of project settings do I need to be using in VS? I will be playing the disc in a PS3 (not sure if that matters as opposed to a regular BD player). I finally managed to produce a successful burn, but it was only able to play once in my PS3 - for some reason after it initially played fine, it wouldn't play again even though there was no damage to the disc. The disc was a BD-RE DL by Maxell. I had previously tried BD-DL Verbatim discs, but I was never able to finish a burn with those.
I'm just trying to figure out why I'm having so much trouble getting my movie from my computer to a playable disc!! Dx
Here are my current project settings:NTSC drop frame (29.97 fps)MPEG files24 bits, 720 x 480, 29.97 fpsUpper Field First(DVD-NTSC), 16:9Video data rate: Variable (Max. 8000 kbps) LPCM Audio, 48000 Hz, StereoAnd here is a screenshot of my Share > Create Blu-ray properties: click.
Blu-ray burner that I'm using: Matshita BD-MLT U240AF. It is connected via USB cable to my Vista 64 laptop. All of my drivers are up to date.
View 14 Replies
View Related
Mar 12, 2011
Is there a way to change VS X4's setting to play after creating an MPEG file. After I edit a file, I create an MPEG, either DVD or Blu-Ray, and I have to go into options everytime to turn off the play after creating default.
View 9 Replies
View Related
Feb 22, 2011
When I run my project with sound on, those clips shot with a HDV camcorder do not play the sync-sound recorded on them properly. I know that the sound recorded with the clops is perfectly alright as it plays properly when each clip is run individually. when they are run as a part of the whole in the project mode all I get is an unintelligible beating sound. I also have clips in the project that were shot with a DV camcorder and the sync-sound with them plays perfectly alright in any mode. I am unable to find any mention of sync-sound in Corel's user guide and am at a loss of what to do to make the sync-sound play correctly. I haven't attempted to lay my sound-track for the project yet.
View 2 Replies
View Related
Jan 14, 2013
By the way, i use it for a whole week, and it worked just fine, until today i have this problem.
View 1 Replies
View Related
Dec 1, 2013
I have made six slideshows and saved them as mpg files. I have not made any chapters. I now want to do a DVD menu. What I would like to try is a first menu screen with two options "Play All" and "Scene Selection". Play-all will play all and then return to this first menu page. Scene-selection will go to a second menu page. Any scene selected will play and then return to this second screen which will have a link back to the first menu. I'm really at a loss to see how to do this using the menu creation in VS. Is it possible?
View 10 Replies
View Related
Apr 20, 2012
Doesn't matter how I render my .mp4 I can't get it to play on my website in flowplayer. I get audio but no video. Also when I try to open in Zune it gives me an error code and tells me the file is corrupt. I can open it in WMP. It uploaded to youtube and played fine. But I don't want to embed from YouTube I want to upload to my site. I've tried other players and same thing...no luck. So what I finally did is opened up my Camtasia and rerendered from there. Now it works fine every where I play it. Sooo, my question is why won't the rendered mp4 play in all mp4 players?
View 5 Replies
View Related
Oct 29, 2012
On my Video Studio Pro 5 I have an annoying delay every time I press Play to preview.
I am sure that pressing this button is the most common thing people do and yet it's the slowest one. It takes 2-3 sec each time.
I have pretty fast new computer i5 overclocked to 4Gh and 8GB Ram and working with short (max 10min) 720p clips.
View 5 Replies
View Related
Sep 20, 2011
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies
View Related
