VideoStudio :: Sync Sound Won't Play
Feb 22, 2011
When I run my project with sound on, those clips shot with a HDV camcorder do not play the sync-sound recorded on them properly. I know that the sound recorded with the clops is perfectly alright as it plays properly when each clip is run individually. when they are run as a part of the whole in the project mode all I get is an unintelligible beating sound. I also have clips in the project that were shot with a DV camcorder and the sync-sound with them plays perfectly alright in any mode. I am unable to find any mention of sync-sound in Corel's user guide and am at a loss of what to do to make the sync-sound play correctly. I haven't attempted to lay my sound-track for the project yet.
View 2 Replies
ADVERTISEMENT
Jun 10, 2012
I am attempting to transfer old VHF video to DVD. Using Hauppauge win Tv capture I achieve a surprisingly good quality sound and vision when capturing and all appears well. But! when I play back the VSP, after approx 2 seconds the sound starts going out of sync and progressively gets further and further out of sync, at worst approx 1 min separation. I hoped that after rendering this would correct itself, but no. I am using UVS 1.
View 9 Replies
View Related
May 25, 2013
I have installed VideoStudio Pro v6 on Windows Pro 64 bi. I tried insert the sound files onto an empty track/video and it just won't play the click ...the audio file just doesn't play.
I can play the sample videos but if I add a sound track that came with the software I get this error. What do i need to do to fix it?
The error message is:
Unable to play the file
[16804:2:1]
View 12 Replies
View Related
Nov 29, 2011
3ds Max 2011, chapter Adding sound...I did exactly the same as this document presents but when pressed Play Animation button, there is no sound. It's stunning because in ProSound dialog, I can play the audio file without problems.
OS: Window 7.
View 5 Replies
View Related
Jul 12, 2012
How do I get the sound to work on video clips? Some do and some do not. I unclicked Draft mode.
View 7 Replies
View Related
Apr 23, 2011
WAV Files will not play in Sound Sequencer, followed the direction...no sound at all. my system plays the WAV file fine in windows. played back is set to real time, I clicked sound on as well...nothing.
View 1 Replies
View Related
Jun 13, 2012
i'd love to see a tutorial on how to sync externally recorded sound to clips.
View 6 Replies
View Related
Dec 4, 2012
The clips are playable with Quicktime or Windows Media Player.
View 4 Replies
View Related
May 16, 2013
Ive made my entire web page its work great in Mozilla firefox broswer. Although when I view the page in Internet Explorer the sound and music dont play. heres a link to my page.
http:[url].....
heres the link to download the Edge files of my project.
https:[url].....
View 2 Replies
View Related
Sep 17, 2012
If you can use gimp or another (hopefully free) program to insert a music or sound file into an image, or signature say, and have it play when you hover your mouse over it?
View 3 Replies
View Related
Aug 25, 2013
I have imported a clip from imovies and cannot play back the sound in preview. What have I done wrong?
View 3 Replies
View Related
Oct 26, 2010
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies
View Related
Aug 18, 2012
I have been editing video with Pro x3 for a while and have not had this problem unti just recently. My computer died and had to be reinstalled (windows 7 ult). When I import flv files they play but are blank. I have tried a couple of things but none work.
View 3 Replies
View Related
Nov 3, 2013
I have a music project with H.264 Video files. The files are all from the same camera and are the same.After burning a BluRay folder on a NTFS external hard disc the first song (is the first from the original video files) is going out of sync. The rest of the Blu Ray is in sync.Watching the first file separtely (KMPlayer and panasonic blyray player) everything is ok.Watching the project in Video Studio before burning everything is ok.
To prevent the out of sync I have made a "smart-proxy file" of the first file, before burning. But sadly no differences. (any need to make a smart-proxy file of all files??)
But not exactly, and after taken some actions I still got out of sync. It has something to do with the BluRay burning but I can not find the cause of it.
Background info:
Editing Program
VIdeo Studio Pro X5
characteristics original video files
Video type: H.264 Video
characteristics: 24 bits, 1280x720 16:9
framespeed: 25000 frame/sec
variable bitspeed (max16568 kbps)
Audio type: Dolby DIgital Audio
48000HZ
Low: no
Bitspeed: 192 kbps
Project characteristics
PAL (25 fps)
MPEG bestanden
24 bits, 720 x 576, 25 fps
Bovenste veld eerst
(DVD-PAL), 16:9
Gegevenssnelheid video: Variabel (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 9 Replies
View Related
Oct 2, 2013
I have recently completed a new project and made a video file (using the DVD option). This video file plays perfectly with media player etc., but when I the burn a DVD from the file all I get is the pictures with no sound.
I am using VS Pro x4 ultimate - what I am missing (apart from the sound! )
View 4 Replies
View Related
Nov 17, 2012
I'm making some music videos, and I thought I'd get the best audio quality using .WAV files instead of MP3 files. Trouble is, when I load a .WAV into my audio track, all I get is a bunch of noise and loud hiss. An MP3 file works just fine. If I play the "clip" in the preview window, each file will play just fine, but the problem shows itself when I play the "project" in the preview window. Is this happening because my computer has choked on all the data, and it's too much for it to handle? Am I stuck with using the MP3 files in my projects?
View 9 Replies
View Related
Apr 3, 2012
All of a sudden my Videostudio X4 will not play any clip for longer then a second or two. When you play a clip or the project it plays for 1 or 2 seconds and stops just like you hit the stop or pause button. Click play again and it does the same thing. Makes it really impossible to edit. It had been working great up until last week. I tried uninstalling and reinstalling but still have the same problem. I have excluded my anti virus from scanning the Corel folder.
View 1 Replies
View Related
May 22, 2013
I have found that the program Videostudio x5 does not play MPG formats.
When using SHARE-Custom-MPG the program renders the video, then displays a general error message and closes the program.
It seems to play AVI, MOV, MP4, WMV, Webm, UIS formats.
Other players work - ie. VLC , Media Player Classic and DIV-X. A black screen is shown in WIN DVD silver.
I have loaded H-Lite 9.90 , FFDSHOW and Windows 8 codecs, but this made no difference.
I have downloaded and installed Videostudio X6 as a trial, but this made no difference either
This is the event log
Event Viewer General
Faulting application name: vstudio.exe, version: 15.0.0.0, time stamp: 0x5149e750
Faulting module name: uvHTMPEG2.dll, version: 0.0.0.0, time stamp: 0x514a04a0
Exception 0xc0000005
[Code]...
View 7 Replies
View Related
Dec 27, 2011
I've edited together some PAL SD video clips, that I copied and pasted from my Sony DCR-SX53ES camcorder, and auto-generated music and when I preview the project through the edit screen everything is okay. I then selected Create Video File and DVD and the output file completed successfully, however, when I play back the file both the original audio from the video clips and the added music are out of sync with the video pictures by about 4 seconds.
This did not happen the previous time I used X4 with the same camcorder and on the same PC, how to correct it.
View 9 Replies
View Related
Sep 19, 2012
I just downloaded the VideoStudio X5 Trial, and want to crop a 10-minute video of my baby to the minute she's singing. Her grandparents would love it.
I noticed that when I imported the video into the timeline, the audio was about 0.75s ahead of the video, when in "Project" mode. In "Clip" mode it looked/sounded fine. When I render the video, it also has the same sync problem as in "Project" mode.
Here are the details of the video:
Video type: H.264 Baseline Profile Video
Total frames: 18,430
Attributes: 24 bits, 1280 x 720
Frame rate: 29.908 frames/sec
Data rate: 11965 Kbps
Audio type: MPEG AAC Audio
Total samples: 29,736,960
Attributes: 48000Hz, 16 bit, stereo
Bit rate: 96 Kbps
View 8 Replies
View Related
Aug 5, 2012
I'm trying to create a music video in the latest trial of X5 (with SP1 and latest QT) with not much luck as the audio/video sync keeps changing.
I've imported all my .MOV files into a project library, files ranging from 50mb to 1gb in size.
Clip properties are:
Video Track 1:
24bit, 1920x1080
29.970 frame/sec
Sound Track 1:
Compression: 16-bit Little Endian
48K, 16bit, stereo
From the get-go, when I Preview or Clip trim view any video segment, the audio is slightly out of sync. I've confirmed the original clip file is fine.
Since I am trying to sync only the video portion of the clip to a pre-recorded audio file I went ahead and lined up a few video clips with the audio file and it see if it would export in in sync but no such luck. Even after synching my video to my pre-recorded audio, the export is out of synch.
X5 looks like a decent program but if I can't even preview my clips with a good audio synch I think this X5 is tremendously flawed.
View 9 Replies
View Related
Oct 31, 2011
I am using Corel Video Studio Pro V4. I am exporting as the following:
- MP4
- 30FPS
- 1280 x 720
- Frame Based
- H.624 MAIN
- 5000 kbps
- AAC
- 44100 Hz
- 256 kbps
- Video is about 25min long
At different parts in the video, the audio begins to be off.
View 14 Replies
View Related
Mar 30, 2012
I have a problem with audio in Video Studio 3. When I insert an AVI file into the timeline and edit it, the audio becomes offset with the video. I have tried just inserting the audio but have the same problem.
If I insert the audio file and click on Sound Mixer I can see the waveform of the file. Although I can hear the audio from the start, the first 1 second of the waveform is at zero and the waveform remains 1 second behind the sound.
If I pause the file and click the curser further along then the offset becomes much greater, around 30 seconds.
If I split the clip at say 10 seconds and delete the first 10 seconds then move the remainder to zero on the time scale, the the remaining file seems to have around 30 seconds missing from the start but the waveform shown stays correct.
I have tried with ripple editing turned on and off. Becoming very frustrated when trying to sync four cameras and their audio.
View 5 Replies
View Related
Oct 19, 2010
I have used X2 for a couple years, but recently bought a new PC with Windows 7. I finished a project (successfully), then after finding and downloading the Windows 7 patches, I was able to burn the project. However, at some point roughly 5 minutes in, all the audio is ahead of the video by about a half a second, and remains that way for the remainder of the project. Watching the project in X2, it works fine, so it is a burn issue. I tried normalizing audio, but that doesn't work. It just seems like a software glitch.
View 4 Replies
View Related
Apr 5, 2012
I purchased (USB-Live 2) to convert VHS tapes to DVD. I initially purchased "Ulead VideoStudio 11" to capture and edit video, but the software wouldn't work. I received the following messages: "cannot start the capture graph" or "cannot capture: copy protected material". I was unable to receive a solution from the Hauppauge tech people or the corel tech people, therefore I purchased the Pinnacle studio 12 software and their Dazzle DVC 100 capture device.
Using the "USB-Live 2" device and Pinnacle Studio 12 as my capture software and Ulead VideoStudio 11 to edit and burn, I successfully converted about 100 VHS tapes to DVD disks. Then the Audio would not sync. What happens is that for about 5 minutes the audio will be out of sync, then something happens and the audio will re-sync and stay in sync until the end of the project. But, with the next tape I try to capture the same problem occurs.When in capture mode I can start capture and let it record for about 5 minutes, then, start the tape in the VCR and the audio will be in sync. I wiped the Hard drive and reloaded Windows XP and all of my programs. I also replaced the sound card, but I still have the same problem. I think the problem is with the Hauppauge USB-Live 2 capture device. If I use the Dazzle DV100 there is no sync problem, just a lot of dropped frames.Also, now when I am capturing the video I have no audio but when I edited the project the audio will be on. When I installed the New Sound Card I disabled the onboard HD Audio and it is still disabled.The following are my computer specs.
Asus P5NSLI motherboard
Intel Core 2 DUO 2.66GHz
3 GB DDR2 800 MHz Ram
Nvidia GeForce GT220
Asus Xonar DG 5.1 Sound Card
Hard Drive: 2- 320 Gb drives
Monitor: eMachines E2024
WinXP SP3
View 4 Replies
View Related
Sep 4, 2011
After i import video files - and try to play them in Video Studio - the video is not smooth (i jitters) and the audio is not in sync with the video.When i play the same video file in windows media player they play well. The Videos are in full HD (.m2ts) format.
View 5 Replies
View Related
Mar 11, 2011
Am converting a VHS tape to DVD. So captured successfully (albeit with an EzCap device). Produced a fairly good quality AVI file and with no editing at all, used VS x2 to produce my mpeg compatible file.
Details of that file are here:
File Format: PAL DVD
File Size: 4,514,938 KB
Duration: 6056.920 Secs
Video Type: MPEG 2 Video, Lower Field First
Totoal Frames: 151,173 frames
Attributes: 24 bits 720 x 576, 16:9
Frame Rate: 25.000 frame/sec.
Data Rate: Variable (Max 6000 kbps)
Audio Type: Dolby Digital Audio
Total Samples 290.252,160 Samples
Attributes: 48000 Hz, 5.1 Channels
Layer: None
Bit Rate 384 kbps
Started a new project, imported the mpeg into the timeline and proceeded to produce my DVD folders. The only custom setting was to reduce the bitrate to 5,000 to get the whole file onto one DVD.
So far so good. Problem is slight out of sync audio towards the middle to end of the DVD. It gets progressively worse as if the audio is at a slightly different frame rate to the video! I have double checked my settings when burning the DVD folders and they are the same as the mpeg except for the bitrate and I have chosen LPCM Audio 48000 Stereo. I tried first with Dolby but that gave the OOS so thought I would try this new setting but the result was the same.
View 6 Replies
View Related
Oct 28, 2011
I place a live music video clip in the timeline. I add the audio clip from a Zoom H2 to the timeline. I sync it up at the beginning matching the audio from the video clip. When I check it 25 minutes into the project the sync is no longer exact. If I slide the audio clip up two frames it is synced at the 25 minute mark but now it's not exact in the beginning. I need to use both sources of audio.
View 5 Replies
View Related
Oct 9, 2011
I have read the thread regarding sound breaking up in ProX3. I have this same problem in ProX3 and ProX2. But all of a sudden I am also experiencing the problem of the video and audio being out of sync in files from my Sony Handycam HDR-CX350 set on Standard. The video files I take using either a Sony or Olympus that I mainly use for still shots work fine.
When I first installed ProX2 and then ProX3 my struggle was with the changes in menus and such as I had been using VS11.5 but the videos themselves worked okay. Now all of a sudden I am experiencing the sound problems. I cannot tie the changes in with any specific Win update as I just don't remember the sequence of events.
At one point I had installed a PowerPoint video converter which gave me a registry error message at the time but the sound problems developed much after that time.
Yesterday I downloaded a trial version from another company thinking perhaps I needed to move on but I believe the out of sync problem is worse with that software than with Corel software.
I am wondering if a setting got changed in how the software manages the video from the handycam but I guess I am not smart enought to see what it might be.
View 14 Replies
View Related
Dec 16, 2012
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...
View 1 Replies
View Related
Jun 7, 2011
Suddenly Pro X3 will no longer play audio.
I import any mpg file which are known to have sound and when i ty to play it there is no audio at all from Pro X3. This has been working all along and it just seems to have stopped. I have made sure of the obvious things.We get sound from other apps so the computer and speakers are fine. I have checked the sound icon from within Pro X3 and it is turned up to max.
View 1 Replies
View Related
