VideoStudio :: DVD Won't Play On Pioneer Player
Oct 21, 2013
I have an SD Pioneer dvd player...model dv-49av. It plays all commercial DVD fine, but never a DVD I burn from VS. However, any DVD I burn from Corel plays perfectly in my Pioneer 23fd bluray player.
Anything I can do to change this? The disk type (-r, +r etc.) doesn't matter and the DVD that won't play plays fine on the computer. The disk loads fine, but when I select play the video or chapter it just locks up and I have to restart the player.
View 14 Replies
ADVERTISEMENT
Oct 22, 2011
I have a Pioneer DV-49AV DVD player. It will play any/all commercially produced DVD but none that are produced in Vstudio. The main menu will display fine, but pressing the button to go to the chapters or play will hang the unit.
I also have a Pioneer BDP-23FD blue ray player and the same Vstudio DVDs play just peechy. Is there some Vstudio compatibility switch that I need to enable prior to burning?
View 6 Replies
View Related
Sep 20, 2011
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies
View Related
Dec 12, 2011
Recently upgraded from X2 to X4 (via box version). Created one DVD-V and one AVCHD (with -R disc) both only play on pc but not on any stand alone dvd player with "Unknown disk" error. Using the same Pioneer burner which created playable DVD-V before by X2. Did I miss some setting in X4? Another problem is with the AVCHD disc. Laptop won't play the menu at all. Had to go to the stream file and find the video content.
Intel 2nd gen i3 processor
8GB ram
520 HD
View 6 Replies
View Related
Aug 28, 2012
I'm using Video Studio Pro X4. I'm just trying to make a simple, first movie and failing. I have a Sony HD Handycam that produces .m2ts files. I just want to be able to create HD movies that I can play on generic software on my tv. So I assumed I could create an MPG file and play it using Windows Media Player 11. After rendering an MPG file, I get no audio output.
- I imported the .m2ts files into VS
- Put two short clips in the timesline.
- Basic transition.
- Share -> Create Video File -> HDV (tried all options)
- I create the MPG file and I get no sound on playback using Media Player
I would think this is the most basic thing I could possibly be doing and it doesn't work. I am using an underpowered XP laptop, but I would think that would just be a speed issue. I'll get a better desktop for editing, but if I can't perform the most basic of tasks now I'm thinking it's a software issue.
View 6 Replies
View Related
Apr 30, 2011
i am using 3ds max design 2011 for making architectural walk through s,i usually render the frame at 740*576 size(300 dpi)and save as tiff sequence.then i will make avi file in after effects(with out any compression). After that when i play the whole movie,the movie will not go smoothly its getting jerks.what the wrong i am doing.i tried with 15 frames per sec and 30 frames per sec.
View 1 Replies
View Related
Jun 15, 2012
when I'm in the MediaHub, using the player there, clicking on the play button will start playback but it does not stop it like it does in the other players. I would expect it to behave just like the play button in the Source/Record Viewers.
View 1 Replies
View Related
Dec 25, 2013
My slideshow will only play on a computer, and not any DVD player
View 4 Replies
View Related
Dec 27, 2011
I am trying the ACAD 2012 demo while I wait for my licensed version disks to come in from Dell.
When I try to run one of the Getting Started videos, AutoCAD LT says:
"Flash version 9.0 or greater is required You have no flash plugin installed"
However, kb2.adobe.com says:
"Your Flash Player Version: 11.1.102.55 Your OS: Windows 7 (64-bit)"
View 7 Replies
View Related
Dec 1, 2012
I get messages that my media player will not read the video tutorials.
View 2 Replies
View Related
Dec 5, 2012
Some of the movies I've been creating play OK in Windows Media Player but when you try and skip to a later part of the movie by holding and moving the toggle bar there is a 'Windows Media Player has a problem playing the movie' error. All the videos are the correct length and file size. Is there a problem with the files and would it affect how they play on Vimeo? Do I need to do them again? What can I do differently?
I have been creating movies with the following properties:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
The source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I'm using Video Studio Pro X5 trial version.
View 3 Replies
View Related
Aug 18, 2012
I have been editing video with Pro x3 for a while and have not had this problem unti just recently. My computer died and had to be reinstalled (windows 7 ult). When I import flv files they play but are blank. I have tried a couple of things but none work.
View 3 Replies
View Related
Nov 17, 2012
I'm making some music videos, and I thought I'd get the best audio quality using .WAV files instead of MP3 files. Trouble is, when I load a .WAV into my audio track, all I get is a bunch of noise and loud hiss. An MP3 file works just fine. If I play the "clip" in the preview window, each file will play just fine, but the problem shows itself when I play the "project" in the preview window. Is this happening because my computer has choked on all the data, and it's too much for it to handle? Am I stuck with using the MP3 files in my projects?
View 9 Replies
View Related
Apr 3, 2012
All of a sudden my Videostudio X4 will not play any clip for longer then a second or two. When you play a clip or the project it plays for 1 or 2 seconds and stops just like you hit the stop or pause button. Click play again and it does the same thing. Makes it really impossible to edit. It had been working great up until last week. I tried uninstalling and reinstalling but still have the same problem. I have excluded my anti virus from scanning the Corel folder.
View 1 Replies
View Related
May 22, 2013
I have found that the program Videostudio x5 does not play MPG formats.
When using SHARE-Custom-MPG the program renders the video, then displays a general error message and closes the program.
It seems to play AVI, MOV, MP4, WMV, Webm, UIS formats.
Other players work - ie. VLC , Media Player Classic and DIV-X. A black screen is shown in WIN DVD silver.
I have loaded H-Lite 9.90 , FFDSHOW and Windows 8 codecs, but this made no difference.
I have downloaded and installed Videostudio X6 as a trial, but this made no difference either
This is the event log
Event Viewer General
Faulting application name: vstudio.exe, version: 15.0.0.0, time stamp: 0x5149e750
Faulting module name: uvHTMPEG2.dll, version: 0.0.0.0, time stamp: 0x514a04a0
Exception 0xc0000005
[Code]...
View 7 Replies
View Related
May 17, 2011
Having produced my first video production on VS4 I made several copies on DVD but I have been unable to get any of those DVD copies to play properly on most DVD players. They all behave differently on on Different players, on some players they won't even start, some will start and play part of the way through before playing up. All copies behave differently on different players. I have been able to get most copies to play properly on my computer.
View 1 Replies
View Related
Aug 25, 2012
...adding effects in VS x5 pro. I just downloaded the trial after upgrading to a new laptop running windows 7 and was told I could not use my videostudio 11 or moviefactory 6 plus. So I have video that I imported from my SDHC card in high def, it played fine until I started adding a crossfade and a couple of slow motions. Now, every video had no sound. I have tried deleting them and bring them back in, but still no sound. It will play music over the tracks, but I have lost all my original sound. I thought I would be able to add some music and lower the original soundtrack at certain points, letting it fade in and fade out, allowing for the original audio to play through and along with the music. I am pretty dissapointed right now and need some answers. Also what happened to the moving menus? I am confused with the templates as well... begininng, middle end or complete. Is that instead of moving menus? Can I not make a moving thumbnail menu with music and chapters?
View 10 Replies
View Related
Dec 6, 2011
I have been creating a project for some time which contains a lot of video clips.Every now and then I position the 'scrubber' mid way along and click on the 'play' button to check what the effect is at the place I am editing.
Today after adding some more video clips to the end of the project and editing them when I place the 'scrubber' where the clips are that I have been editing and click on 'play' to see the effect instead of VS 'paying' my video from the position the scrubber was placed at it moves the scrubber to the start of the project and plays from the beginning. It was not doing that yesterday (I have added some more clips to the end of the project since then and editing them).This is VERY annoying as I cannot check to see what parts of the movie (project) look like without playing from the start of the project (30 minutes in length).
View 4 Replies
View Related
Jan 14, 2012
I download avi files and then edit them in Videostudio X4. THe avi's are always from different resolutions and framerate.
When i play the converted or edited avi files on my mediaplayer on a Widescreen tv then the video is played may time not full screen. Sometimes it is on top and sides filled with black borders.
I would like the video's always be full screen on tv (off course with good quality).
My question is: how can i see in Videostudio if the video can be played full screen on tv?
Let's say i have 2 video's: divx / xvid 576 x 320 at 25.000 fpsec and 512 x 384 at 188.900 at 25.000 frames per second. Would these files be played full screen on the tv?. How can i calculate that it is 4:3 or 16:9 and what must the preference be in Video studio itself: 16:9 or 4:3?
View 1 Replies
View Related
May 25, 2012
I'm trying to create a blu-ray movie that contains AVCHD videos of various vacations that I've been on over the past year (just your typical collection of home movies), but I've had problem after problem in trying to create the damn thing. I've used VS Pro X4 to create four individual movies (representing four different vacations, each saved as vsp files); I then created my "menu file" to compile all four movies into a single blu-ray with each one having menu buttons that then go to chapter sections. Then, due to VSX4 never completing a successful burn, I simply had it create the Blu-Ray folders and then used ImgBurn to burn them to disc.
ANYWAYS, what kind of project settings do I need to be using in VS? I will be playing the disc in a PS3 (not sure if that matters as opposed to a regular BD player). I finally managed to produce a successful burn, but it was only able to play once in my PS3 - for some reason after it initially played fine, it wouldn't play again even though there was no damage to the disc. The disc was a BD-RE DL by Maxell. I had previously tried BD-DL Verbatim discs, but I was never able to finish a burn with those.
I'm just trying to figure out why I'm having so much trouble getting my movie from my computer to a playable disc!! Dx
Here are my current project settings:NTSC drop frame (29.97 fps)MPEG files24 bits, 720 x 480, 29.97 fpsUpper Field First(DVD-NTSC), 16:9Video data rate: Variable (Max. 8000 kbps) LPCM Audio, 48000 Hz, StereoAnd here is a screenshot of my Share > Create Blu-ray properties: click.
Blu-ray burner that I'm using: Matshita BD-MLT U240AF. It is connected via USB cable to my Vista 64 laptop. All of my drivers are up to date.
View 14 Replies
View Related
Mar 12, 2011
Is there a way to change VS X4's setting to play after creating an MPEG file. After I edit a file, I create an MPEG, either DVD or Blu-Ray, and I have to go into options everytime to turn off the play after creating default.
View 9 Replies
View Related
Feb 22, 2011
When I run my project with sound on, those clips shot with a HDV camcorder do not play the sync-sound recorded on them properly. I know that the sound recorded with the clops is perfectly alright as it plays properly when each clip is run individually. when they are run as a part of the whole in the project mode all I get is an unintelligible beating sound. I also have clips in the project that were shot with a DV camcorder and the sync-sound with them plays perfectly alright in any mode. I am unable to find any mention of sync-sound in Corel's user guide and am at a loss of what to do to make the sync-sound play correctly. I haven't attempted to lay my sound-track for the project yet.
View 2 Replies
View Related
Jan 14, 2013
By the way, i use it for a whole week, and it worked just fine, until today i have this problem.
View 1 Replies
View Related
Dec 1, 2013
I have made six slideshows and saved them as mpg files. I have not made any chapters. I now want to do a DVD menu. What I would like to try is a first menu screen with two options "Play All" and "Scene Selection". Play-all will play all and then return to this first menu page. Scene-selection will go to a second menu page. Any scene selected will play and then return to this second screen which will have a link back to the first menu. I'm really at a loss to see how to do this using the menu creation in VS. Is it possible?
View 10 Replies
View Related
Apr 20, 2012
Doesn't matter how I render my .mp4 I can't get it to play on my website in flowplayer. I get audio but no video. Also when I try to open in Zune it gives me an error code and tells me the file is corrupt. I can open it in WMP. It uploaded to youtube and played fine. But I don't want to embed from YouTube I want to upload to my site. I've tried other players and same thing...no luck. So what I finally did is opened up my Camtasia and rerendered from there. Now it works fine every where I play it. Sooo, my question is why won't the rendered mp4 play in all mp4 players?
View 5 Replies
View Related
Jun 27, 2011
Video Studio X4
Is there anyway to play a clip backward? Tried looking special effects did not see it. Have footage of a person running into a pool, I'm trying do a one two one two effect before they go in.
View 1 Replies
View Related
Oct 29, 2012
On my Video Studio Pro 5 I have an annoying delay every time I press Play to preview.
I am sure that pressing this button is the most common thing people do and yet it's the slowest one. It takes 2-3 sec each time.
I have pretty fast new computer i5 overclocked to 4Gh and 8GB Ram and working with short (max 10min) 720p clips.
View 5 Replies
View Related
Nov 20, 2013
The following didn't eventually cause me a problem since I have retained some earlier versions of VS. Normally, starting way back with VS version 8, I've happily downloaded avi files from my handicam, edited them and made nice home movies on DVD, worth watching even by non-family .
But now I've just been given a couple of mpeg-4 files (total time of 1 hr 20 min or so) to turn into a nicely edited DVD (it's an orchestral concert). If I insert the files into the timeline in either X5 and X6, the audio doesn't sound when I try to play either the project or the clip. Do the same with X4 and things work perfectly, audio comes through loud and clear. So I've used X4 for the task, I kept it on my computer.
An additional task was to make an audio CD - no sweat, I just created a sound file (in the "share" tab) with X4 and went from there. Trying to do the same with either X5 and X6 caused the software to crash with an error message.
error message
View 4 Replies
View Related
Jan 1, 2013
I've burned some DVDs with ProX5 on the slowest speed 4x and someone I gave it to says it won't play correctly on his older stand-alone DVD player hooked to his TV. I had originally burned them at 16x so reburned it at 4x. He says it starts to skip and stop about mid way. I am not using dual layer DVDs. He says they play fine on a friend's newer stand-alone DVD player. I'm thinking it's a problem with older stand-alone players.
These DVDs play fine on my computer and my stand-alone DVD player hooked into my TV. My player is newer with Blue Ray although my project is not Blue Ray.
Also one thing I've noticed is when I set the burn speed, burn the DVDs, they complete, then when I go back and check the burn speed again it is not what I set it at. Does this mean ProX5 burns them at whatever speed it wants despite where it's set? I tried seeing the burn speed after the fact thinking I could see it in my Nero11 disc analysis but it does not give me the burn speed.
View 2 Replies
View Related
Jan 16, 2011
I'm a long time user of Videostudio Pro all the way back to Media Studio Pro 6. I recently purchased VideoStudio Pro X3. I am working with HD video from a Samsung HMX-H200. The MP4 files were moved to my computer directly from the SDHC card. The format of the files is 1080i. I believe the camera records at 60 fps, but in VSP it is reported as 29.97.
The problem is as follows... I can load a clip on the timeline and play it in project mode, but if I try to play it in clip mode, the preview window goes black and stays this way until I press the stop button. Even stranger is I can scrub through the clip just fine in clip mode.
I have tried both SP2 patches. I have applied the latest Direct X updates. I have re-installed VSP. I tried this with Smart Proxy on and off. I've tried several other system wide optimizations like like cleaning the registry. No luck.
View 4 Replies
View Related
May 25, 2013
I have installed VideoStudio Pro v6 on Windows Pro 64 bi. I tried insert the sound files onto an empty track/video and it just won't play the click ...the audio file just doesn't play.
I can play the sample videos but if I add a sound track that came with the software I get this error. What do i need to do to fix it?
The error message is:
Unable to play the file
[16804:2:1]
View 12 Replies
View Related
