i am using 3ds max design 2011 for making architectural walk through s,i usually render the frame at 740*576 size(300 dpi)and save as tiff sequence.then i will make avi file in after effects(with out any compression). After that when i play the whole movie,the movie will not go smoothly its getting jerks.what the wrong i am doing.i tried with 15 frames per sec and 30 frames per sec.
View 1 RepliesI'm using Video Studio Pro X4. I'm just trying to make a simple, first movie and failing. I have a Sony HD Handycam that produces .m2ts files. I just want to be able to create HD movies that I can play on generic software on my tv. So I assumed I could create an MPG file and play it using Windows Media Player 11. After rendering an MPG file, I get no audio output.
- I imported the .m2ts files into VS
- Put two short clips in the timesline.
- Basic transition.
- Share -> Create Video File -> HDV (tried all options)
- I create the MPG file and I get no sound on playback using Media Player
I would think this is the most basic thing I could possibly be doing and it doesn't work. I am using an underpowered XP laptop, but I would think that would just be a speed issue. I'll get a better desktop for editing, but if I can't perform the most basic of tasks now I'm thinking it's a software issue.
I get messages that my media player will not read the video tutorials.
View 2 Replies View RelatedI am animating with mocap and biped in Max. A character that is walking, the mocap I have is a straight line. Is there a way in the mixer to have the characters walk curve without having a clip of a curved walk?
View 1 Replies View RelatedI have rigged a character and made it into a character set in which i have locked the scaling attribute , I have then saved this file. I have then referenced this file and and have done a walk cycle animation and saved this file. I have then realised that I needed the scaling attribute when I have added other parts of my scene. Is there a way to unlock the scaling attribute in my walk cycle animation file or will i have to go back and change it in the rigged file, create a new character set and do the walk cycle animation again?
View 2 Replies View RelatedI have an SD Pioneer dvd player...model dv-49av. It plays all commercial DVD fine, but never a DVD I burn from VS. However, any DVD I burn from Corel plays perfectly in my Pioneer 23fd bluray player.
Anything I can do to change this? The disk type (-r, +r etc.) doesn't matter and the DVD that won't play plays fine on the computer. The disk loads fine, but when I select play the video or chapter it just locks up and I have to restart the player.
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies View RelatedI have a Pioneer DV-49AV DVD player. It will play any/all commercially produced DVD but none that are produced in Vstudio. The main menu will display fine, but pressing the button to go to the chapters or play will hang the unit.
I also have a Pioneer BDP-23FD blue ray player and the same Vstudio DVDs play just peechy. Is there some Vstudio compatibility switch that I need to enable prior to burning?
Recently upgraded from X2 to X4 (via box version). Created one DVD-V and one AVCHD (with -R disc) both only play on pc but not on any stand alone dvd player with "Unknown disk" error. Using the same Pioneer burner which created playable DVD-V before by X2. Did I miss some setting in X4? Another problem is with the AVCHD disc. Laptop won't play the menu at all. Had to go to the stream file and find the video content.
Intel 2nd gen i3 processor
8GB ram
520 HD
VLC media player is not responding Windows can check for a solution when you go online. If you close the program, you might lose information.
→ Check for a solution and close the program → Close the program → Wait for the program to respond When this error message was displayed on my screen, I am wondering about the error message. I managed to play some videos days ago, and suddenly now I cannot run VLC.
I checked my computer for some viruses that might infect my computer. After a full scan, there was no virus found. I reinstalled VLC and same error persisted when opening a file.
when I'm in the MediaHub, using the player there, clicking on the play button will start playback but it does not stop it like it does in the other players. I would expect it to behave just like the play button in the Source/Record Viewers.
View 1 Replies View RelatedMy slideshow will only play on a computer, and not any DVD player
View 4 Replies View RelatedI am trying the ACAD 2012 demo while I wait for my licensed version disks to come in from Dell.
When I try to run one of the Getting Started videos, AutoCAD LT says:
"Flash version 9.0 or greater is required You have no flash plugin installed"
However, kb2.adobe.com says:
"Your Flash Player Version: 11.1.102.55 Your OS: Windows 7 (64-bit)"
I just took a screenshot of this movie playing in WMP. Then I pasted it into Photoshop. Now.. when I move it around, it only moves the top part: WMP, my desktop etc.. But the movie part stays in the same spot. The samething happens when I zoom in, it doesn't get any bigger. I can't get the part with the movie though. I saved it as bmp and jpg but it doesn't show up..
View 2 Replies View RelatedSome of the movies I've been creating play OK in Windows Media Player but when you try and skip to a later part of the movie by holding and moving the toggle bar there is a 'Windows Media Player has a problem playing the movie' error. All the videos are the correct length and file size. Is there a problem with the files and would it affect how they play on Vimeo? Do I need to do them again? What can I do differently?
I have been creating movies with the following properties:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
The source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I'm using Video Studio Pro X5 trial version.
...like a menu popping out and going back again.
View 7 Replies View RelatedI am trying to get Microsoft media player to see the albums i have created in Photoshop Elements
View 4 Replies View RelatedI am trying to select a song for a slide show. The song is in the library of Windows Media Player. When I am in LR Slideshow I click on "select music" The Select Music window does not show the Windows Media Player.
This is on a PC laptop with Window Vista Home.
How can I get to the library in the Windows Media Player to select a song?
how to do an animation of a walk-around or fly by of a model?
View 1 Replies View RelatedI'm trying to record a movie of a visibility check drive from an alignment.
I can record a movie of the drive along my alignment using the action recorder but I would like to record to a file that can be played in a windows media player.
Is this even possible?
I have a mocap cycle cleaned up and read to cycle, with and without translation, the cycle with translation is perfect because it avoids the sliding feet probelm.
Is there a way to give this cycle a path to follow so it can walk along this path and take curves and those things?
I'm looking around the net, but I don't seem to be able to find anything, the only thing i was able to think of is the path contraint, but, if i'm right, it won't respect the cycle translation, and i can use it without translation but it will be hard to avoid the sliding feet problem.
I wanted to make a walk cycle animation, How to move a character up and down without affecting the feet position?
View 1 Replies View Relatedi have been using the drivenTime node to create walkcycles that follow motion path curves where the out time is connected to some attribute via a unitToTimeCOnversion node.in previous version of Maya.
When i try to connect anything to the Out Time of new drivenTime node the connection never works, not even keyframes?
is there a fix or workaround for this?
When I load a set of files into RAM Player they do not always fully load. In two separate instances 1381 frames have loaded (in todays example there are 1921 frames rendered in the set).
I guessed that stopping at 1381 frames on two occasions was a bit curious and maybe thought the memory limit was not set high enough. I increased this but no change.
I have tried a coule of times to add photos to a new project, to make a slideshow. In one case I added some transitions just to see how they look. Then I click on the PLAY button, nothing happens. I've tried it a coule of times, saving under different filenames. What gives? in one case I rendered the file, no difference.
A big waste of time so far. I did convert some video clips from a .mov format and the worked fine on almost any DVD player but I I am trying to make a slideshow for a web page and nothing is working.
I've been working on an animation for a week or two and all of the sudden the file no longer plays the animation. The keyframes are there and I can scrub through them, but when I hit play it just hangs on the frame it's already on, it says it's playing (The icon changes to stop and in the corner it says "Hit ESC to stop playing", but nothing moves. I can bring it into older versions of Maya and it plays, but the only other version of Maya I have is 2008 and it doesn't like the transfer from 2011 to 2008.
View 2 Replies View Related3ds Max 2011, chapter Adding sound...I did exactly the same as this document presents but when pressed Play Animation button, there is no sound. It's stunning because in ProSound dialog, I can play the audio file without problems.
OS: Window 7.
So far all of the tutorials I've seen regarding Cineware walk through how to bring a 3D object into AE. But, I haven't seen anything yet on bring a 3D animation into AE.
I have a simple Cinema 4D 3D animation created with C4D R14. I successfully brought it into AE CC via Cineware.However, it is not clear how to make it play in AE. It plays well in C4D. But, I can't get it to play in AE.
I imported 100 images (each one on a different layer) in Photoshop CS5.1 to make some image correction. Those images are an animation sequence.
Now, I try to figure out how to play the animation? When I click PLAY, it doesn't move from a layer to another which would make it animate. It stays on the first layer.
how to get my animation to play when my website is first opened...much as this website does with it's really cool "PT" plasma logo...I've gotten VERY inspired by the animation example on this forum and want to animate something of my own, need to know how to get it to play in Dreamweaver though..
View 4 Replies View RelatedI've tried deleting all preferences. I was working with the camera originally then suddenly the keyframes wouldn't appear as red lines (there was only 1 camera) and appeared blank, i deleted these 'blank' keyframes and ever since I've been unable to play the entire camera sequence, the timeline simply sits at 0. I've tried a new camera with it's own keyframing but to no avail, it refuses to play.
edit: I just tried in a new scene also, same problem. It's making it near impossible to preview animations in real-time.