I just took a screenshot of this movie playing in WMP. Then I pasted it into Photoshop. Now.. when I move it around, it only moves the top part: WMP, my desktop etc.. But the movie part stays in the same spot. The samething happens when I zoom in, it doesn't get any bigger. I can't get the part with the movie though. I saved it as bmp and jpg but it doesn't show up..
View 2 RepliesI get messages that my media player will not read the video tutorials.
View 2 Replies View RelatedSome of the movies I've been creating play OK in Windows Media Player but when you try and skip to a later part of the movie by holding and moving the toggle bar there is a 'Windows Media Player has a problem playing the movie' error. All the videos are the correct length and file size. Is there a problem with the files and would it affect how they play on Vimeo? Do I need to do them again? What can I do differently?
I have been creating movies with the following properties:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
The source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I'm using Video Studio Pro X5 trial version.
I am trying to select a song for a slide show. The song is in the library of Windows Media Player. When I am in LR Slideshow I click on "select music" The Select Music window does not show the Windows Media Player.
This is on a PC laptop with Window Vista Home.
How can I get to the library in the Windows Media Player to select a song?
I'm trying to record a movie of a visibility check drive from an alignment.
I can record a movie of the drive along my alignment using the action recorder but I would like to record to a file that can be played in a windows media player.
Is this even possible?
I am trying to get Microsoft media player to see the albums i have created in Photoshop Elements
View 4 Replies View RelatedVLC media player is not responding Windows can check for a solution when you go online. If you close the program, you might lose information.
→ Check for a solution and close the program → Close the program → Wait for the program to respond When this error message was displayed on my screen, I am wondering about the error message. I managed to play some videos days ago, and suddenly now I cannot run VLC.
I checked my computer for some viruses that might infect my computer. After a full scan, there was no virus found. I reinstalled VLC and same error persisted when opening a file.
I'm using Video Studio Pro X4. I'm just trying to make a simple, first movie and failing. I have a Sony HD Handycam that produces .m2ts files. I just want to be able to create HD movies that I can play on generic software on my tv. So I assumed I could create an MPG file and play it using Windows Media Player 11. After rendering an MPG file, I get no audio output.
- I imported the .m2ts files into VS
- Put two short clips in the timesline.
- Basic transition.
- Share -> Create Video File -> HDV (tried all options)
- I create the MPG file and I get no sound on playback using Media Player
I would think this is the most basic thing I could possibly be doing and it doesn't work. I am using an underpowered XP laptop, but I would think that would just be a speed issue. I'll get a better desktop for editing, but if I can't perform the most basic of tasks now I'm thinking it's a software issue.
i am using 3ds max design 2011 for making architectural walk through s,i usually render the frame at 740*576 size(300 dpi)and save as tiff sequence.then i will make avi file in after effects(with out any compression). After that when i play the whole movie,the movie will not go smoothly its getting jerks.what the wrong i am doing.i tried with 15 frames per sec and 30 frames per sec.
View 1 Replies View RelatedI tried to install the trial version of cs3 from the adobe website, but after I installed the setup part and started downloading the actual program, it said it downloaded 1 shared component but it couldn't download the actual CS3 program.
My computer says I'm using:
Quote:
Microsoft Windows XP
Media Center Edition
Version 2002
Service Pack 2
I'm not sure what the download problem was, I checked Adobe's troubleshooting page
P.S. - If CS3 isn't compatible with Windows XP Media Center Edition, is Photoshop CS2? I had CS2 on my old computer, which was one of the Windows XP (can't remember which one, but it had service pack 2) but I would like to download CS2 or preferrably CS3 on my new computer.
I have a Windows 8 64-bit system. Why Corel VideoStudio X6 has Windows Media Encoder 9 Series included in the installation package. It is not even supported on Windows 7 and 8. [URL]
View 1 Replies View RelatedI have this videofile, it opens in Windows Media Player. What I want to do is get a screenshot, but somehow something weird happens. When I press Print Screen, open a new file in CS 2, and then paste, it all seems to work fine. But then when I move the image around on my desktop, the screenshot does not move with it. When I save it as a .jpg and then re-open it, the peripherals of the screenshot, like my toolbar and the Windows Media Player frame, are preserved, but the actual screenshot is not visible.
View 3 Replies View RelatedI have worked in Sony Vegas 9 and I was hoping Adobe Premier Pro CC was similar--- but its not. I can't figure out how to render and save a file as a windows media or mp3 or in any format for that matter.
View 4 Replies View Relatedhow to make a screenshot of a movie scene?
View 9 Replies View RelatedI get this prompt while copying sequences between projects with gateway-linked footage, and I'm not sure what it means.
---------------------------------------------------------------------
CLIP MGT: Unmanaged media contained in selection. Store media on Wire?
---------------------------------------------------------------------
Is it asking me if I want to store a local copy or stonifize the media?
I've had this problem a while. At first, I thought it was Windows, but the problem only happens in Photoshop.
I get a screenshot of a dialog box using alt+PrtScr. This gets just the dialog box and not the surrounding images.
Next, I go into Photoshop and create a new document (ctrl-n). This brings up the dialog and sets the preset to Clipboard and the dimensions are properly set, so I go ahead and create the empty document.
Next, I paste (ctrl-v) the image into the document. The left part of the image (not sure how many pixels) should actually be on the right. I can cut them off one end and paste it on the other, but this eats up a lot of time when you need to create several images.
This does not happen in MS Word or Adobe Illustrator. Only Photoshop. I would like to get this fixed because it is much more efficient in Photoshop (if it works correctly) than in Illustrator.
Environment: Windows 7 (32 & 64 bit), Photoshop CC
I've tried to show you the difference in color with this screenshot, but saving the screenshot changed the color too, so if you input the hex code you'll see that the colors you get are different than what was actually in the screenshot. Point is, Photoshop is tinting my images greener than I want. It does it when I use Save As and Save For Web.
View 4 Replies View RelatedHow do I get a screenshot into organizer?
View 1 Replies View RelatedI have Google Earth screen shot saved as a .jpg. I would like to set the scale. I know it will be crude. I have a tractor trailer that is 8.6 ft wide in the image. I'm trying to get a rough scale to add in a turf area to show folks what it will look like.
View 8 Replies View RelatedI'm starting to get pretty good at Action Scripts... the tough part I find is making it full-proof. Unselecting and re selecting layers to make sure everything works smoothly.
Here's an action script I did recently, Putting whatever image or screenshot you want onto a pair of iPhone 5s. Complete with glare and everything. Let me know what you think of the script! you can download it here:
[URL]........
where when I try to export my video, I get a pop up window saying 'some media is offline, it will be rendered using the red media offline graphic'. in Premier pro all my media seems to be online, I have followed several different video tutorials on how to re-link media and the option to re-link media is greyed out for me as there is no media that is unlinked, so why does this message come up when trying to export? Playback in PP is fine, all media appears to be online.
Having viewed the exported video it seems that all the media which has been replaced by the red 'media offline' logo is all the .MTS files filmed on my Camcorder whereas all the GoPro footage is showing up correctly in the exported video.
I noticed that the history brush screenshot taken from the fly-out menu (instead of from the camera icon at the bottom of palette) doesn't work. History brush only works if you use the camera icon at the bottom of the history pallette and then select "current layer" for your snapshot from the drop down menu which shows up after you press the camera icon.
View 1 Replies View Related(As i did i saved the PSD to DDS) so what will i do. SO this is the one i made I don't know why it look like that but the original picture is like this [URL]...........
View 4 Replies View RelatedHow do I post a screenshot from wordpad?
View 2 Replies View RelatedI have taken a screenshot of a dialog in Windows and I want to manipulate it so that one of the controls on the dialog is highlighted. One effect that I have seen other screenshots take is to darken most of the screenshot, leaving the control to which the viewer's attention should be drawn in its original color. The image at [URL] .... is close to the effect I want to achieve -- darken some areas of the screenshot and leave other areas in their original color, thereby bringing attention to the undarkened areas.
How might I acheive this effect in Paint.NET? I am new to the app, so feel free to point me to tutorials if I need to learn about layers or some other aspects of the app.
I have CS3 and bought a CS5 upgrade. Both were loaded on my PC via the cd/dvd player. I am switching to a laptop that I bought without a CD/dvd player. I was able to copy the CS5 CD to a flash drive and load it fine. I was unsuccessful with CS3 so I can't use CS3 as an upgrade. How can I get CS5 to work after the 30 day grace period?
View 1 Replies View RelatedI used these commands years ago and cant remember what they are. I am designing furniture in 3D and want to view the object at SE Isometric, then rotate an additional 18 degrees, then take a screenshot that will basically give me a block that is a line drawing of the object with lines hidden. This is a question with two parts:
#1: How do I rotate from SE Isometric 18 degrees to get the view angle I want?
#2: How do I take a screenshot of the object that will produce a block with hidden lines?
There are two seperate commands for each of these, I just can't remember what they are.
Attached is a picture of the final product I'm looking for.
A copy whichever version of Xtreme was the last one before the flyout buttons, copy of the default toolbars?
I've used Xtreme Pro v6 since it was released with just the pointless 3D and Live Effect buttons removed from the toolbar, and always mean to get round to putting the other buttons back as they were but always seem to be too busy. I particularly dislike the gallery flyout buttons and can never find the bitmap and name gallery without spending 10 seconds or so looking for it.
Installing Xtreme Pro v7 is the prompt I needed to get the toolbars sorted out once and for all. I'm sure I can work more quickly if the buttons are where I'm used to, but just as with the keyboard I can type very quickly so instinctively know where the keys are, but couldn't write the keys in order if my life depended on it!
Here's the text:
1. Should Media Cache Files and Media Cache Database be in separate folders? Does it matter?
2. Can I open an "in progress' project from P Pro CS4 with CC P Pro and continue editing?
I am trying to draw on a screen shot from Google Earth. The image has a scale legend that has a measure line that is "80ft". I try to do a scale>reference to make my line equal 80 ft but instead the line I create is "2.75 inches". So I am trying to create a scale that equals what my screen shot is.
View 9 Replies View RelatedI have just joined and installed Paint.net earlier this week.
Well my title is what it says, I got a picture from a website via Screenshot/Screenprint and it will not save in your picture app feature, it keeps saving as a word app which I had first printed the Screenshot/Screenprint to.
Would I be better Screenshot/Screenprinting direct from the webpage, I wouldn't want to lose this perfect picture.