Photoshop Elements :: Windows Media Player Will Not Play Tutorial Videos?
Dec 1, 2012I get messages that my media player will not read the video tutorials.
View 2 RepliesI get messages that my media player will not read the video tutorials.
View 2 RepliesI am trying the ACAD 2012 demo while I wait for my licensed version disks to come in from Dell.
When I try to run one of the Getting Started videos, AutoCAD LT says:
"Flash version 9.0 or greater is required You have no flash plugin installed"
However, kb2.adobe.com says:
"Your Flash Player Version: 11.1.102.55 Your OS: Windows 7 (64-bit)"
I'm using Video Studio Pro X4. I'm just trying to make a simple, first movie and failing. I have a Sony HD Handycam that produces .m2ts files. I just want to be able to create HD movies that I can play on generic software on my tv. So I assumed I could create an MPG file and play it using Windows Media Player 11. After rendering an MPG file, I get no audio output.
- I imported the .m2ts files into VS
- Put two short clips in the timesline.
- Basic transition.
- Share -> Create Video File -> HDV (tried all options)
- I create the MPG file and I get no sound on playback using Media Player
I would think this is the most basic thing I could possibly be doing and it doesn't work. I am using an underpowered XP laptop, but I would think that would just be a speed issue. I'll get a better desktop for editing, but if I can't perform the most basic of tasks now I'm thinking it's a software issue.
i am using 3ds max design 2011 for making architectural walk through s,i usually render the frame at 740*576 size(300 dpi)and save as tiff sequence.then i will make avi file in after effects(with out any compression). After that when i play the whole movie,the movie will not go smoothly its getting jerks.what the wrong i am doing.i tried with 15 frames per sec and 30 frames per sec.
View 1 Replies View RelatedI just took a screenshot of this movie playing in WMP. Then I pasted it into Photoshop. Now.. when I move it around, it only moves the top part: WMP, my desktop etc.. But the movie part stays in the same spot. The samething happens when I zoom in, it doesn't get any bigger. I can't get the part with the movie though. I saved it as bmp and jpg but it doesn't show up..
View 2 Replies View RelatedSome of the movies I've been creating play OK in Windows Media Player but when you try and skip to a later part of the movie by holding and moving the toggle bar there is a 'Windows Media Player has a problem playing the movie' error. All the videos are the correct length and file size. Is there a problem with the files and would it affect how they play on Vimeo? Do I need to do them again? What can I do differently?
I have been creating movies with the following properties:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
The source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I'm using Video Studio Pro X5 trial version.
I am trying to select a song for a slide show. The song is in the library of Windows Media Player. When I am in LR Slideshow I click on "select music" The Select Music window does not show the Windows Media Player.
This is on a PC laptop with Window Vista Home.
How can I get to the library in the Windows Media Player to select a song?
I'm trying to record a movie of a visibility check drive from an alignment.
I can record a movie of the drive along my alignment using the action recorder but I would like to record to a file that can be played in a windows media player.
Is this even possible?
My slideshow will only play on a computer, and not any DVD player
View 4 Replies View RelatedI am trying to get Microsoft media player to see the albums i have created in Photoshop Elements
View 4 Replies View RelatedI am running the elements 9 I have downloaded my pictures and video from my Canon camera the pictures I can view but the videos will not play or cannot be viewed , an error states the compression or a non compatability. What I have to add or download to allow me to view , edit and share my pictures and videos.
View 1 Replies View RelatedWhen I import a short AVCHD or MPG (~ 1 min., 100 mb) into Premiere Pro CS6 or After Effects CS6, it plays great. When I import the same file into Photoshop CS6 on the same computer, it's jerky, even with sound off, frame skipping enabled, cached, and no other applications running.
System is a Core i7 with 8 gb RAM, 1.5 gb nVidia GeForce, Win 7 x64 and DirectX 11. All drivers ruthlessly updated.
I have tried a coule of times to add photos to a new project, to make a slideshow. In one case I added some transitions just to see how they look. Then I click on the PLAY button, nothing happens. I've tried it a coule of times, saving under different filenames. What gives? in one case I rendered the file, no difference.
A big waste of time so far. I did convert some video clips from a .mov format and the worked fine on almost any DVD player but I I am trying to make a slideshow for a web page and nothing is working.
I have an SD Pioneer dvd player...model dv-49av. It plays all commercial DVD fine, but never a DVD I burn from VS. However, any DVD I burn from Corel plays perfectly in my Pioneer 23fd bluray player.
Anything I can do to change this? The disk type (-r, +r etc.) doesn't matter and the DVD that won't play plays fine on the computer. The disk loads fine, but when I select play the video or chapter it just locks up and I have to restart the player.
I have been happily using this program for a few weeks and have nice movies and view well on PC. Only problem I find is being able to save a Movie to dvd to play on a dvd player. The only way I can do it is to save the movie as a video file and then burn to disc using Windows DVD Maker. As far as I can see I have tried all options on Video Studio, and have had no success at all.
View 5 Replies View RelatedI have a Pioneer DV-49AV DVD player. It will play any/all commercially produced DVD but none that are produced in Vstudio. The main menu will display fine, but pressing the button to go to the chapters or play will hang the unit.
I also have a Pioneer BDP-23FD blue ray player and the same Vstudio DVDs play just peechy. Is there some Vstudio compatibility switch that I need to enable prior to burning?
Recently upgraded from X2 to X4 (via box version). Created one DVD-V and one AVCHD (with -R disc) both only play on pc but not on any stand alone dvd player with "Unknown disk" error. Using the same Pioneer burner which created playable DVD-V before by X2. Did I miss some setting in X4? Another problem is with the AVCHD disc. Laptop won't play the menu at all. Had to go to the stream file and find the video content.
Intel 2nd gen i3 processor
8GB ram
520 HD
VLC media player is not responding Windows can check for a solution when you go online. If you close the program, you might lose information.
→ Check for a solution and close the program → Close the program → Wait for the program to respond When this error message was displayed on my screen, I am wondering about the error message. I managed to play some videos days ago, and suddenly now I cannot run VLC.
I checked my computer for some viruses that might infect my computer. After a full scan, there was no virus found. I reinstalled VLC and same error persisted when opening a file.
when I'm in the MediaHub, using the player there, clicking on the play button will start playback but it does not stop it like it does in the other players. I would expect it to behave just like the play button in the Source/Record Viewers.
View 1 Replies View RelatedI cannot get the Adobe TV videos to play--even the ones in my library--all I get is a black screen--I have been ay from Adobe TV for several months--what has changed and how can I view the videos?
View 16 Replies View RelatedI've got LR5 and I started with a completely new catalog, so no migration of anything old.I have lots of video clips from my GH3 but every time I try to play one in the Library it doesn't play. I look at Task Manager and dynamiclinkmediaserver.exe is pegged at close to 100% CPU usage and using 500MB of memory.
View 1 Replies View RelatedAutodesck Exchange opens when we launch AutoCad. When any page displays with videos, there is a message that Flash is not installed. None of the videos play. Flash is installed and we re-installed it.
View 2 Replies View RelatedI really like Smoke, I've tried pre-release and I've noticed there is no realtime playback. I have pretty fast machine, MBP, 17, 1920x1200, SSD, 16Gb Ram, 2.3 Ghz (early 2011), AMD 1GB, but still it seems too slow for Smoke?
optimize it for laptops, because 50% of users siting on laptops.
I just installed AutoCAD 2013 under Windows 8
AutoCAD 2013 installed as expected but I can not run the Flash based introduction movies.
I am a new to AutoCAD, have never used to program before and would like to switching the "preferences" (which I can't find) to a better browser like Google Chrome.
Suggestion for Autodesk: Please dump IE in favor or propper browsers. IE has never and will never work properly.
In conclusion: How can I get the Flash videos to work. Where do I register the software?
Because of the above issues, I've installed AutoCAD 2013 on my iMac and everything is running as expected. I am more of a Linux/OS X user and have limited experience with Microsoft products.
Way to pick an alternate video player. I'm a pse 11 user, I only use the organizer for my pictures and video. I like to view them in it. It's always a lot of trouble to view videos in the pse video player because it cannot play most of them out of the box. It cannot be set in full screen. I would like a shortcut like the image one, edit in alternate editor. It would be view in alternate video player, I would use vlc and never bother with the embedded one.
View 1 Replies View RelatedI made a dvd video on elements 7 (wmv) but it will not play on a dvd player. If I upgrade to elements 11 will it allow me to burn a dvd that will be a different format to be played on a dvd player?
View 2 Replies View RelatedWhy does my internet explorer stop working when I upen up a tutorial for Photoshop Elements 12?
View 1 Replies View RelatedI tried to install the trial version of cs3 from the adobe website, but after I installed the setup part and started downloading the actual program, it said it downloaded 1 shared component but it couldn't download the actual CS3 program.
My computer says I'm using:
Quote:
Microsoft Windows XP
Media Center Edition
Version 2002
Service Pack 2
I'm not sure what the download problem was, I checked Adobe's troubleshooting page
P.S. - If CS3 isn't compatible with Windows XP Media Center Edition, is Photoshop CS2? I had CS2 on my old computer, which was one of the Windows XP (can't remember which one, but it had service pack 2) but I would like to download CS2 or preferrably CS3 on my new computer.
I have a Windows 8 64-bit system. Why Corel VideoStudio X6 has Windows Media Encoder 9 Series included in the installation package. It is not even supported on Windows 7 and 8. [URL]
View 1 Replies View RelatedI have not renamed or moved original elements, yet when I recently opened an on-going project in Photoshop Elements 4.0, about 1/4 of the media elements were gone. Why? Is there a way to troubleshoot this? Anyway to recover these slides? Can't see that any photos, etc in the Organizer have broken links.
View 1 Replies View RelatedWhenever I start Elements Organiser, there is an on-screen message that there are files ready to import and that the Organiser will now import these files into the Catalog. Then a "Getting Media" box displays and, at some point, say 56%, the "racing cursor" appears and the programme does nothing more. It just freezes and eventually there is a Windows message stating that the programme is not responding. This happens in Elements/Premiere 11. I reinstalled Elements 6 and the file importing works quickly and without problem in that version of Elements.
This is a new, custom-built PC, running Windows 7 Home Premium 64-bit. 16 Gb memory. Adobe programmes were installed for 64-bit OS exactly as directed in Adobe instructions. All hardware drivers are up to date. No other problems with any other software, just Adobe's Elements 11 bundle !