VideoStudio :: MPEG-4 Audio Doesn't Play In X5 Or X6 But Does In X4
Nov 20, 2013
The following didn't eventually cause me a problem since I have retained some earlier versions of VS. Normally, starting way back with VS version 8, I've happily downloaded avi files from my handicam, edited them and made nice home movies on DVD, worth watching even by non-family .
But now I've just been given a couple of mpeg-4 files (total time of 1 hr 20 min or so) to turn into a nicely edited DVD (it's an orchestral concert). If I insert the files into the timeline in either X5 and X6, the audio doesn't sound when I try to play either the project or the clip. Do the same with X4 and things work perfectly, audio comes through loud and clear. So I've used X4 for the task, I kept it on my computer.
An additional task was to make an audio CD - no sweat, I just created a sound file (in the "share" tab) with X4 and went from there. Trying to do the same with either X5 and X6 caused the software to crash with an error message.
error message
View 4 Replies
ADVERTISEMENT
May 7, 2012
Working with family project (captured by someone else-not me). Gist is that the raw AVI file doesn't have any sound when I play in media player or VSX2. The avi video format shows up as mpeg4s Decoder DMO and the audio as "Unknown ACM Format". I naively used this to make an mpeg vid file and tried to tweak the audio using LPCM but the resulting file has no audio either. The avi shows the video compression as mpeg4 but when I use my mpeg4 converter it doesn't recognise it so it's obviously an avi file with an mpeg4 video compression used.
Is there any way to recover the audio in these circumstances?
View 5 Replies
View Related
Dec 18, 2012
I created a PDF slide show with MP3 audio (from Elements Organizer version 10.0). The PDF doesn't play the audio. What can I do ?
View 4 Replies
View Related
Aug 25, 2012
...adding effects in VS x5 pro. I just downloaded the trial after upgrading to a new laptop running windows 7 and was told I could not use my videostudio 11 or moviefactory 6 plus. So I have video that I imported from my SDHC card in high def, it played fine until I started adding a crossfade and a couple of slow motions. Now, every video had no sound. I have tried deleting them and bring them back in, but still no sound. It will play music over the tracks, but I have lost all my original sound. I thought I would be able to add some music and lower the original soundtrack at certain points, letting it fade in and fade out, allowing for the original audio to play through and along with the music. I am pretty dissapointed right now and need some answers. Also what happened to the moving menus? I am confused with the templates as well... begininng, middle end or complete. Is that instead of moving menus? Can I not make a moving thumbnail menu with music and chapters?
View 10 Replies
View Related
Aug 28, 2012
I'm using Video Studio Pro X4. I'm just trying to make a simple, first movie and failing. I have a Sony HD Handycam that produces .m2ts files. I just want to be able to create HD movies that I can play on generic software on my tv. So I assumed I could create an MPG file and play it using Windows Media Player 11. After rendering an MPG file, I get no audio output.
- I imported the .m2ts files into VS
- Put two short clips in the timesline.
- Basic transition.
- Share -> Create Video File -> HDV (tried all options)
- I create the MPG file and I get no sound on playback using Media Player
I would think this is the most basic thing I could possibly be doing and it doesn't work. I am using an underpowered XP laptop, but I would think that would just be a speed issue. I'll get a better desktop for editing, but if I can't perform the most basic of tasks now I'm thinking it's a software issue.
View 6 Replies
View Related
Nov 18, 2012
I just installed Video Studio Pro x5. When I load a .avi video it doesn't play. When I click play after I imported the file, the screen is black. If I play the avi in windows it works. How to get it visible so I can edit it it in x5?
View 5 Replies
View Related
Nov 10, 2010
I made a complex video clip from .avi files with Corel Videostudio Pro X3, I saved the project then moved my original files to different folder. After some time I decided I want to edit my video again and re-linked the files successfully but now when I try to play my project in edit mode it doesn't play smoothly, it stops and delays. I can't edit in such conditions because I can't preview my work... Before moving my files everything was fine. No changes were made to my computer...
View 3 Replies
View Related
Aug 19, 2011
Problem after rendering a video file using FFDshow video codec (for AVI compression in Mpeg4 base) and using Mpeg Layer 2 192kbps 48Khz audio for the audio format?
I have been using this tried and true format for years with no issues whatsoever... until recently within the past year or 2 I have been running similar problems with it. I had recently concluded it was due to the Mpeg Layer 1 and 2 audio codecs that DVD Movie Factory 7 install as prior to version 7 I have always had DVD Movie Factory 6 that I have to install in order to get this audio format on the system to use with encoding.
I had completely reset my system up recently... with NOT installing Movie Factory 7 and remaining with version 6 and have had no issues with encoding using VideoStudio Pro X3. However, I had gone ahead and installed the Service Pack 2 update for VideoStudio X3 and seems like since then the problem has resurfaced. Now I am usually left with glitchy audio. My question to the Corel guys... does Service Pack 2 for VideoStudio X3 have any relationship whatsoever to the Mpeg Layer 1 and Layer 2 audio codecs that Movie Factory 7 install? Because if it does, then you seriously have a problem with these newer codecs in the software and you need to revert back to previous versions which work without any problems.
View 2 Replies
View Related
Mar 1, 2011
I am having difficulty generating files with VS X3. The app works fine opening the source files, editing and preview playback. Preview replay has audio and is very smooth. However, all generated files have no audio. The files I'm working with are recordings using the Hauppauge HD PVR controlled by BeyondTV (V4.9.2). Those fies are MPEG-2 Transport files, having the extension *.tp. VS does not recognize the TP extension - which is very frustrating. When I change the extension to M2T, they import fine.
View 7 Replies
View Related
Oct 13, 2012
I have audio when I run the video in organizer. I've tried replacing the videorenderer.dll, and adding ad2ac3dec.dll, to no avail.
View 1 Replies
View Related
Feb 13, 2014
I'm trying to import an HDV clip into Premiere Pro on my iMac running OSX Lion. I have 5 clips from the shoot and 4 are importing fine. The first sign of trouble is that when I see the clip in the media browser the box is initially bright red. Then, when I import it the video is fine, but it doesn't have audio attached. I watched the clip in Quicktime and the audio plays fine. Is there a limit to what size file you can import into Premiere (this one is very slightly bigger thant he others - 12.67 GB)? Or is there any other reason/work around? I'm not very technical so I'm not sure if I can provide much more info than that. T
View 19 Replies
View Related
Jan 10, 2014
Weird audio noise after encoding for Mpeg for Blu-ray.
It's random and does not happen all the time. Started to do it after I update the latest Premiere CC.
Seems to happen when i apply a transistion to a audio clip from no audio. Sound like a mic to close to a speaker repeating the sound faster and faster. I cant hear it durning the editing, just after exporting.
View 1 Replies
View Related
Apr 21, 2014
I can't get any audio to play while in Premiere Pro. The computer's programs has audio in the speakers and headphones with everything but Premiere, including exported premiere files but I'm not sure why. It was fine just two days ago.
View 3 Replies
View Related
Aug 15, 2013
I've created a slide show and have attempted to insert an audio mp3 file. Audio file shows that it has been added to slide show but it wil not play.
I've added the mp3 multiple ways, by using the add media -- audio from element organizer as well as by add media ---audio from file but it won't play
MP3 plays fine when I click on it from the organizer.
I've tested the mp3's that came with elements 11 and they play fine. What's the deal?
View 1 Replies
View Related
Jan 28, 2014
I am using Premiere CC to edit Pro Res 422 in a sequence using the ARRI Cinema 23.976 sequence preset. My rough cut sequence has lost all audio playback. I can play audio from the source, and in other sequences in the same project but this sequence specifically is not giving my ANY playback. In audio hardware, I have set output to built-in output and made sure that my system is set to the same thing as well. When I click into channel properties, right click>Modify Channel I see 4 audio tracks set to Source Channel 1, 2, 3, 4. All are set as "Ch.1" under Channel in track.
View 7 Replies
View Related
Feb 26, 2014
Every Quicktime I import and cache into my project won't play audio, even though the audio tracks show up in the timeline with waveforms and the seqeunce specs match that of the source audio. Apparently Flame users are having similar problems. I'm having to strip out the audio into AIF for separate import and re-sync.
Oddly enough, I can hear the audio prior to import when playing the preview clip in Media Hub.
View 5 Replies
View Related
Mar 31, 2012
For some reason today it just stopped paying the audio from my Nikon D300S video files. I tried importing a new file but that won't play either and I reloaded the program and that won't work either. I know the audio is that as it will play in Windows.
View 1 Replies
View Related
Apr 22, 2013
So my animation is a song and I'm doing like a video clip with interactivity (the interactivity is not inside at the moment).I need to have a play button so we can see (heard) on iPhone, iPad...
My problem is that the animation begin immediately behind the play button and before I press it.So the song and the animation are not synchronize.I try many things to stop the animation but nothing is working.
View 2 Replies
View Related
Dec 30, 2013
How do I insert an audio while you play back an animation?
View 2 Replies
View Related
Jan 28, 2014
I have uploaded an edge animate cc published html with sound. The html file opens perfectly on my mac pro safari browser perfectly with audio. But when I open the same file on my iphone5 the file opens but no the audio does not play.
View 4 Replies
View Related
Oct 4, 2011
If I render a Videostudio-file of 15 minute in .mpeg, it is about 750 000 great, if I render it in .mp4 it grows to 1.200 000, why?
View 5 Replies
View Related
Apr 24, 2011
I know there must be a thread or post about the best MPEG settings when you are going through the steps to burn a DVD, but did a search and came up with nothing.
Those items in bold are checked in X4.
In the MPEG properties
● Do not convert
● Support X-Disc
● Two pass conversion
● Treat MPEG audio as non-DVD compliant
● Auto fade
● Play all
● Auto repeat
Lower field first?
Under Change MPEG settings/Customize do any of you change anything? General Tab and Compression? I know to move the slider under compression to 100%. Not sure about the rest.
View 6 Replies
View Related
Oct 30, 2010
I'm a recovering Roxio user. 6 years. Finally fed up with 2011 crashing everytime I tried to convert DVD to MPEG4. I just downloaded VS Pro X3 and how to do this. I'm assuming it can be done on this program.
View 1 Replies
View Related
Dec 3, 2013
When I burned an AVI (that I captured with VS X4) to a single layer dvd VS does the job, except that when I palce the dvd in my living room Sony player I have the following error message : The disk is dirty. I tried twice with the same result! When I capture directly to the mpeg format and then burn a disk I have no problem.
How I could convert AVI to MPEG (no menu, no edition) in a simple way?
View 4 Replies
View Related
May 26, 2013
I am using VS X6 ultimate that I purchased yesterday
I am capturing videos from VHS tape using an S-Video connection
I have tried different capture options settings and the capture always saves in MPEG
I believe that AVI has the least loss and would prefer to save in the AVI format since I intend to do some editing of the original content The end objective will be to burn reults to DVD
Can VS X6 capture files in AVI? If so, what settimgs should I use? Any settings that would be best for this type of transfer to HDD?
View 3 Replies
View Related
Oct 25, 2010
Capturing VHS to MPEG? Does this tutorial work?
[URL]
View 4 Replies
View Related
Apr 7, 2011
I did a ton of research on Video Editing software and decided to try VS Pro X4 first due to it's ease of use (good for me) and capabilities that I can grow into. So far I would say the experience has been positive and feel I could happily settle in with VS Pro X4 for the long haul, but have just a couple of questions I would like to resolve first. They may not be issues at all, but more due to my lack of knowledge, but figured experienced users like yourselves would be able to determine that in short order.
I've split my questions into separate (3) threads so that people don't have to suffer through content they're not interested in. Here's a brief run down on where I'm at and what I'm trying to do.
I'm about half-way through my 30day trial of VS Pro X4, and starting to feel a little more comfortable with the software, but a few things are still puzzling me. Granted I've only scratched the surface of the SW capabilities so far.
I'm a complete newbie to this digital video stuff, however I'm not a complete newbie to computers. Basically I have a shoeobox of old 8mm camcorder tapes (analog) and have finally decided to take the plunge and digitize them, mainly because we never end up watching the tapes 'cause it's such a pain.
First question; A friend of mine is letting me borrow his ADVC300 converter, connected to a Firewire400 card in my PC. VS Pro X4 capture works fine, was able to capture an entire 8mm tape. It was an entire tape because that's the way it was taped, it was a music performance so the tape ran through the whole show. I was able to add a simple title and burn to a DVD disc. What should I expect for MPEG compression when burning to a DVD? I couldn't fit it all on one DVD disc, had to split it into two discs, not a big deal, just thought the mpeg conversion would have compressed it more? Maybe that's wishful thinking on my part? It's a 2 hour & 2minute video which equals a large ~8.7Gb raw DV capture file through the ADVC. I know a DVD is 4.7Gb max so obviously the 8.7Gb raw file won't fit, but is 2:1 compression/conversion expecting too much for the mpeg conversion? Maybe there's some options I should be using to compress it more?
All in all I'm pretty happy with the ADVC to digital capture functions with VSPx4 so far.
View 8 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
Mar 1, 2011
Is it possible to Capture in MPEG FORMAT with Pro X4?
It was possible with Pro X2 but not with Pro X3.
View 2 Replies
View Related
May 3, 2012
I'm testing demo version of this product and I would like to know how to change output parameters of mpeg-4 codec (Share->Create Video File->MPEG-4-> MPEG-4 HD). I live in Europe and my video source is Full HD 25fps, but Video Studio's mpeg-4 codec has only parameter constants 30fps.
View 5 Replies
View Related
Apr 17, 2012
Today I use a dvd maker freeware program...load this mpg file and it creates the dvd folder and I create the image from that. Total size is 4.2 and it reports using 94% of the dvd available space. Freeware program puts in extra screens advertisements so can't use it.
I attempt to use the share-create disc and import same mpg file and it reports in the bar that its 6.48GB. To me this is a problem and I can't understand why it reports it as 2.2GB larger than the actual file size. There is no menu its from a new project, nothing imported to the timeline, just open, create, import and my OS and every other program must be reporting it wrong.
View 1 Replies
View Related
