VideoStudio :: X4 Unable To Scrub Video In Clip Mode With Proxy On?
Apr 1, 2011
If I have project properties set to anything but the default, I am unable to scrub through a clip when in clip mode if the clip has the second icon indicator, as shown in the screen grab below. This second icon (double diagonal frames) does not appear immediately. Before it appears, I can scrub in clip mode, but after it appears, I cannot. What that icon represents? My video files are from Canon HV20 (m2t 1440x1080) and my project properties match them.
I have a suspision that it has something to do with proxy files, and that once the proxy file is made, I lose clip scrubbing.
I just tried turning off smart proxy, and wouldn't you know it, I can scrub in clip mode.
I restarted X4 and clip scrubbing is fine. I enabled Smart Proxy, and clip scrubbing doesn't work again.
View 3 Replies
ADVERTISEMENT
Jun 20, 2011
I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.
View 4 Replies
View Related
Jan 16, 2011
I'm a long time user of Videostudio Pro all the way back to Media Studio Pro 6. I recently purchased VideoStudio Pro X3. I am working with HD video from a Samsung HMX-H200. The MP4 files were moved to my computer directly from the SDHC card. The format of the files is 1080i. I believe the camera records at 60 fps, but in VSP it is reported as 29.97.
The problem is as follows... I can load a clip on the timeline and play it in project mode, but if I try to play it in clip mode, the preview window goes black and stays this way until I press the stop button. Even stranger is I can scrub through the clip just fine in clip mode.
I have tried both SP2 patches. I have applied the latest Direct X updates. I have re-installed VSP. I tried this with Smart Proxy on and off. I've tried several other system wide optimizations like like cleaning the registry. No luck.
View 4 Replies
View Related
Jan 21, 2013
Mediastudio 5 pro ultimate
Win7 64
AMD 960T on six cores
Asus M5A78L M LX +
8 GB
HD 3000 integrated graphics
OS is installed on a 128 MB SSD
Project target file is on a 500GB WD Blue.
I have ripped a Blue Ray DVD as an .m2t, at an average bit rate of about 18.5 Mb/sec, with a resulting file size of over 16GB. Needles to say this file bogs the machine when not running the proxy. When I finish a session and close the program, the proxy file is gone the next time I open the project. The same thing happens when the machine goes to sleep with the project open. I have to either slog through working directly on the project without the proxy while it slowly rebuilds, or wait a couple of hours for the rebuild to complete.
Any way to stop the file from being deleted? I went to power options and selected never, but the next day it was gone again.
Another thing would be to increase the speed of the proxy creation, as it only uses about 20% of the CPU. Better to get it done faster... I have tried raising the priority of the process to high with little if any change.
View 1 Replies
View Related
Dec 21, 2013
I have a video clip that I have edited, and once it finishes exporting, I cannot open it in any video playing application. Upon checking the file's Properites, it says that it is a 24 byte file... this can't be right. In the Export Settings window it says that it's several gigabytes!
I'm using a custom built PC, running the most up-to-date version of Windows 8. I have a quad-core Intel Ivy Bridge Processor, AMD HD Radeon 7770 GPU, 8 GB of 1600 MHz RAM, a 256 GB SSD running the OS and frequently used applications, and a 1 TB HDD. I am running Adobe Premiere Pro CS6 and it is completely up to date.
I have been digitally converting old VHS, 8mm, and miniDV tapes. I have a digtial converter that has Composite ports and an S-Video port on it. It connects to the computer via USB. I have a program called Debut Video Capture that records the video and saves it as an uncompressed .mp4 video file. Premiere Pro also has another issue where the audio and video are always out of sync because it can't seem to handle videos with variable framerates, so, I open the videos in Quicktime 7 Pro, and save them as a Reference Movie—This makes it so the videos are at a constant framerate. I take these files and import them into Premiere Pro. My sequence is DV - NTSC Standard 48kHz (the videos are all in an old 4:3 format). I'll drop the clips into the timeline and edit them, edit out the blue screens and splice different clips and such, lower the volume, and slightly increase the Scale in the Video Effects.
When everything is done... I'll open up the Export Settings.
I set the Format to H.264 and Preset to NTSC DV or NTSC DV Widescreen depending on the ratio of the video. Some of the videos are very long (1 Hour or longer... one video is almost 4 hours long). I will go down to the Bitrate Settings and change the Bitrate Encoding to CBR, and set the Target Bitrate to a reasonably high number. I try to have a minimum of 10 Mbps, or if the video isn't that large, I'll set it to 14. If the Estimated File Size is over like 3 GB (I'm not sure of the number, but it works for these long videos when they're under like 3 GB). If the videos go over, they'll encode for an hour or longer and when it's done, it will save and appear as a 24 byte file.
The only thing I've got is to make the Target Bitrate very small, that's the only way the videos will encode, but then the quality degrades...
View 3 Replies
View Related
Dec 27, 2011
X4. I created a 48hz sample rate 24 bit WAV file on my portable Tascam recorder.. I am creating a sales presentation for my invention. I have brought in many different videos I created on my camera and have edited them successfully with single clip and multi clip. Also have been able to split audio out of video. adjust sections using the nodes with the sound mixer.. move audio after split to different areas on the timeline.. However I need to do some voice over work. I figured it would be much easier and better quality for me to use my tascam to create the wav's and then just drop them into the project, edit them and place them where I want them, mute the voice I have on the video..
I was able to bring the .wavs in just fine.. and while editing them in clip mode they play just fine, I can shorten them or cut them where I need too. But when I choose to play back the project with the .wav in one one of the additional sound/music tracks I get very nasty static only. None of my recorded voice is audible. click to clip mode on the wav audio and it plays perfect. I tried moving it to the voice over track area and same exact problem.
am I missing a switch function somewhere? I made sure I muted the video clips above the .wav in the timeline. The manual says to use import option to bring in audio files but I do not see an import button anywhere? missing something? seems to me the drag and drop or add to library a wave file should work.. ??
View 2 Replies
View Related
Dec 7, 2012
Is it by design that I cannot hear sound from videoclips played in "clip" mode when the volume is set to 100% ? I can hear the sound OK when the volume is changed to anything other than 100%, like 101% or 99%. By the way I can hear the sound OK when played in Project mode at 100%, just not in clip mode at 100%. This is very annoying as I need to change the volume of each clip to hear it. Product is VS-X5 digital purchase. video clips are from Leica Dlux-5 foto camera, which is basically a panasonic inside (avcdh lite 720p)
View 7 Replies
View Related
Sep 4, 2013
Working with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
View 14 Replies
View Related
Nov 10, 2011
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
View 2 Replies
View Related
Aug 24, 2013
In videostudio x6, How to zoom and pan on a video clip.
View 1 Replies
View Related
Jan 21, 2012
I am usin the trial version of VideoStudio. After a lot of fiddling about (VideoStudio didn't recognize my camcorder) I was able to see my video clips in VideoStudio by placing my memory card in an external card reader. Whilst all the clips appear, VideoStudio informs me that there are no valid video clips.
View 9 Replies
View Related
Jul 28, 2013
I'm editing MTS files/AVCHD. Footage filmed with a panasonic cam, using Pro 6, when I hit share tab - create video file - I have many choices but I would like to save it as high format as the original, so do I hit , (Same as First Video Clip) or (AVCHD) both are nearly the same I'm guessing, I've saved in both formats and both ended up been the same size. What one I should save to ? I have added the properties of the original file.
View 14 Replies
View Related
Jan 20, 2013
Can VS X4 rotate video clips?
View 2 Replies
View Related
May 6, 2011
I shot a sign then paned to building. However regardless of what I used, the wind was so bad that day the video footage was useless.I figured that would be the case the day I was shooting so I took out my Sony still camera and shot a series of still shots panned.I now need to take those still shots and make it appear as though it is video panning from the sign to the building. I then can lead that into a video that did come out good of the front of the building.In VSX4, ?I have done similar before by trimming the time and adding crossover, but it just does not look "good".
View 3 Replies
View Related
Apr 4, 2013
I am wondering if there is an easy method to apply a video filter to EVERY video clip in a project instead of having to apply it manually to every clip.
View 2 Replies
View Related
Mar 26, 2013
While watching some of my practice videos, I notice a blurring and or distortion on the edges of some video clips. Is this a result of a to much bright or to much color I have added, or is it a result of both.
View 5 Replies
View Related
Nov 30, 2012
I am trying to create a introduction clip to a video. This is just a short written intro describing the contents of the video. Is there a method in VideoStudio X5 Pro that would allow me to do this?
View 3 Replies
View Related
Nov 25, 2010
How does one change the thumbnail for a video clip? By default, VS Pro X3 seems to use the first frame of the clip. I would like to choose the frame. Is that possible in VS?
View 7 Replies
View Related
Nov 2, 2010
I have a video clip in VS and i wanted to cut it up every .5 seconds. How can this be done easily?
Is there a way to merger to clips so that they cut back and forth every 5 seconds?
View 2 Replies
View Related
Apr 20, 2013
As the title says.. if I have a video, say for instance MPEG-4 1920x1080, rendered by Videostudio, and I multitrim it, then render it again using the 'Same Settings as First Clip' setting - is the video re-coded, or do I maintain original quality and the different parts are just effectively joined together?
View 2 Replies
View Related
Feb 19, 2013
I have a video clip in my 'video' timeline and while it's being played, I want to zoom-into a user-specified location on that clip. Hopefully, using a 'stretchable' rectangle, circle, ellipse, etc. to encompass the part I want to zoom into. Is this possible with a video clip, or does it work on static graphic images only?
View 2 Replies
View Related
Nov 25, 2012
Is it possible to draw an arrow or a circle or whatever, on a video clip? Example: I draw a circle around the head of a moving person for the next 15 seconds. I use VPpro X5 ultimate.
View 11 Replies
View Related
Oct 28, 2013
I have installed X6 and it runs fine. However the option: save as still image is not available any longer. How I can make an image from my video clip?
View 2 Replies
View Related
Jul 20, 2012
I've been unable to resolve a problem encountered when I insert a "title" to overlay on the first 30 seconds of a corresponding video clip.
When played back, the subsequent portion of the remaining video clip past 30 seconds goes missing. However, on this "missing portion" the audio portion of the video clip is present while the video portion becomes solid black to the end of the clip. The same result happens when I burn it.
In the "PROJECT" playback mode both the title and the video play fine, as do both the video and title in the "CLIP" mode.
View 4 Replies
View Related
May 24, 2013
can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?
View 12 Replies
View Related
Jul 2, 2011
I just purchased Video Studio Pro X4 and I'm hoping it wasn't the wrong decision. We do a lot of voice overs and wanted to start adding subtitling and audio swap to our list of services. Subtitling with the software has proven to be easy, as well as the audio swap. But I've just ran into a problem that I can't solve (I'm an audio guy through and through...but my video skills are low)
Video Type: H.264 Baseline Profile Video
Total Frames: 6,356
Attributes: 24 bits, 1280 x 720
Frame rate: 25.000
Data rate: 4836 Kbps
Audio Type: MPEG AAC Audio
Audio Attributes: 48000 Hz, 16bit stereo
I easily swapped the original audio for ours and wanted to render the video exactly as it was given to me. However, when I try using the option: "Save as First Video Clip" it gives me the error:
"The frame size (1280 x 720) of the video file does not match the settings and therefore cannot be trimmed." 18706:1:1
This happens on both of my computers (Windows XP & 7). Am I missing some codecs...my video cards not up to snuff, or something else? Again, I know little about video.
In Settings, I tried changing the project properties to similar settings as the original video, but the highest frame size it will give me is 720 x 480; and 'user defined' is grayed out. Not sure if any of that matters at all.
Lastly, yes I can manually type in all the info in the Custom option and can successfully render a video with similar specs, but I was hoping to just use the "Save as First Video Clip" option.
View 4 Replies
View Related
Dec 5, 2010
I am attempting to completely strip and/or delete the audio from a video clip after I drag it into the time line.
The purpose is to not only eliminate the audio entirely since it will never be used with the video, but to also make the total file size smaller.
I notice that when I "split the audio" from the video clip, the audio clip is still present in the video and the file size is the same -- even after I have deleted the "now split audio" from the time line. When I right click on the video clip, I also notice that the audio is simply muted, not deleted.
Is there any way to totally delete the audio?
View 2 Replies
View Related
Mar 24, 2012
I am really new to video Studio Pro X4. How can I isolate a single cell (frame) of a video clip and export it or save it as JPG or BMP or some other graphics format for use as a pic in another application. i.e. photosho, paint shop, Corel Draw, etc.
View 4 Replies
View Related
Jul 25, 2013
trying it out as a hobby.Installed VS Pro x5 in a secondary drive. Trimmed a mpeg-2 U-tube using multi-trim , tried to save it as per manual by selecting>file> save trimmed clip. It started to render instead of asking which drive to save.
View 4 Replies
View Related
Dec 11, 2011
I know how to change the playback speed of a video clip in my project, but is there a way to have it smoothly transition? For instance, can I have it go from 1x to 3x over a period of 2 seconds or must I jump directly from 1x to 3x (or manually break the files into dozens of super small chunks and manually increase each one... which will still not look smooth)?
View 2 Replies
View Related
Nov 12, 2011
I am in the process of giving Video-studio another chance, in that I am testing VSX4 TBYB, Let me say - its a close tossup between Cyberlinks latest Power Producer and its amazing speed and quality output albeit a little more fiddly, and well to be honest if it were not for Video-Studio's past history being so fresh in my mind the decision would have been easy..
Anyway - So far my clips captured with my new Canon Legria HF-G10 don't show any evidence of that Old AVCHD editing blip or mismatched frames around a transition when working with raw AVCHD Files,
So is it safe to assume that the problem is now redundant for good!????? Or have I just been lucky so far - or is that unlucky? in that the TBYB is coded differently to the Ultimate version which I may or may not end up getting..
My other concern was and still is the fact that some of my old raw MP4 video clips can not be directly imported into VSX4 TBYB as they could when I tried VSX3 TBYB version before I ended up deferring, so I am wondering whether this only applies to the VSX4 TBYB seeing VSX3 TBYB had no problems? or is that another major issue that Corel just cant get right, what with only the occasional version capable of working with all multimedia files out there..
Which reminds me is anybody else noticing a significant contrast and detail loss even after smart rendering with VSX4? or is this only because I am using a TBYB version and thus full 25 Mbit Rendering is available in the Ultimate version?
View 4 Replies
View Related
