VideoStudio :: Video Clip Transition Blip - MP4 File Mismatch
Nov 12, 2011
I am in the process of giving Video-studio another chance, in that I am testing VSX4 TBYB, Let me say - its a close tossup between Cyberlinks latest Power Producer and its amazing speed and quality output albeit a little more fiddly, and well to be honest if it were not for Video-Studio's past history being so fresh in my mind the decision would have been easy..
Anyway - So far my clips captured with my new Canon Legria HF-G10 don't show any evidence of that Old AVCHD editing blip or mismatched frames around a transition when working with raw AVCHD Files,
So is it safe to assume that the problem is now redundant for good!????? Or have I just been lucky so far - or is that unlucky? in that the TBYB is coded differently to the Ultimate version which I may or may not end up getting..
My other concern was and still is the fact that some of my old raw MP4 video clips can not be directly imported into VSX4 TBYB as they could when I tried VSX3 TBYB version before I ended up deferring, so I am wondering whether this only applies to the VSX4 TBYB seeing VSX3 TBYB had no problems? or is that another major issue that Corel just cant get right, what with only the occasional version capable of working with all multimedia files out there..
Which reminds me is anybody else noticing a significant contrast and detail loss even after smart rendering with VSX4? or is this only because I am using a TBYB version and thus full 25 Mbit Rendering is available in the Ultimate version?
I'm using the Fade to Black transition in X5. The problem is that the fade out cuts off the end of the clip before it fades into the next one.
I want the fade effect but don't want to lose anything of the clips even if it means there will be a longer black screen during the fade. Is this possible and if so how?
I've made several dvds over the past 12 months or so and this has not occured but on my latest venture I am getting a nano-second of the video picture narrowing from wide screen during each transition. It then almost immediately goes back to wide screen, causing something like a sideways blink. I am mainly using crossfades with the occasional circle wipes, clocks and spins. This does not occur, however, when using crossfade on the still images, which I pan and zoom, and include at the end of the video.
I am using a JVC Everio Camcorder with a Medion Akoya E600 D (MD8328) PC with Windows Vista 32bit.
I have tried several methods of creating the video file: Same as Project Settings, Same as first Video Clip, MPeg Optimiser and even custom, all with Upper Field First and all with the same result.
After creating a DVD or HD Blu-ray disc to watch on my HD TV the video skips after every transition effect while watching the DVD or HD Blu-ray disc on my tv's and computers. The videos do not skip when I upload them to the internet.
Is it normal for video to be sharper during the CIRCLE transition and then return to the 'normal' sharpness at completion of the transition.
I have just rendered a project which contains quite a few transitions including Crossfade, Side, Spin, Face and Circle. Every time I have used the Circle transition the image 'inside' the 'circle' appears sharper until the 'circle' fills the screen (i.e. the end of the transition) when the image appears 'normal'.
I think that there is something wrong with CIRCLE transition as I have also noticed that it does not display correctly (preview window goes black) when you 'drag' the scrubber along the timeline.
When I apply a transition to a clip on the overlay track (and/or title track) the transition is applied to the video on the video track... even if the clip on the video track is 'in the middle' to where the transition is on the overlay track. e.g. If I apply a dissolve (or any transition) to the overlay clip... the clip on the video track will go through said transition also. VSX4
In other words, the clip on the video track goes through the transition applied on the overlay or title track.
This does not seem right. I saw nothing in preference that would affect this and I saw no way of 'de-parenting' the video track with the overlay or title track. (By de-parenting I mean separating the tracks so what happens on one does not affect the other.)
i wanted to try it because of its flexible overlay capabilities. I have a main video on the background and i want a small overlay video to appear on top of it, but to come in with a transition. I couldn't make the transition to effect only on the overlay video, it effects the whole video (both main and overlays together). Is there a way to make it work only on the overlay video?
I have just installed VideoStudio Pro X5 on my computer and have not been able to open any videos in it due to 'file mismatch error.mp4'.So I went online to search for fixes and came across the patches. I downloaded BOTH but only pack TWO would work for me.When trying to install pack 1 (of COURSE the most important) I get this error message:
"The installed version of the application could not be determined. The setup will now terminate" EVERY single time I retried it, this is all I got. Pack 2 went off without a hitch and installed perfectly.
And I know there are other posts about this and they say 'product is already updated if you get this message' but I am still having the issue.Details about where my videos I'm trying to edit came from: recorded from an AverMedia C281 Game Capture HD in full 1080 HD
Videos were recorded on to a WD Elements 2TB 2.0 external hard drive- which in turn saved them as .mp4 files.
'How' am I trying to add video?I am on the 'edit' yellow box.I am clicking on 'file', 'insert media file into library' then I select the 3 hour video (are there limits? I've also tried 20 minute videos and they don't work either) that I'm trying to edit and it then reads:
"Unable to open file M:(video number). File Format mismatch. Then [16803:1:2] in brackets?So I'm sitting here with a product that is useless to me as I can't even get it to open anything up. And I don't want to spend time converting these videos as many of you say 'it works fine for me- don't know what you're doing wrong. all you can do is convert them'.
I have noticed many times that when I add the CIRCLE transition between two video clips that when I drag the 'scrubber' along through the two clips and transition, when the scrubber goes past/through the circle transition the preview window goes blank (displays black).
If I change the CIRCLE to any other transition it displays (the transition) correctly but as soon as I put the CIRCLE back it once again only shows BLACK.
If I PLAY the project the CIRCLE transition displays correctly - it is only when dragging the scrubber that the problem exists.
Is there a known problem with the CIRCLE transition?
I used to own Ulead Video X2 and after consulting many times with Ken Berry I was successful in some important projects. I now have purchased VideoStudio X6 with the hopes of it performing well right out of the box. No such luck. I have installed in on my HP work laptop thinking it's much more powerful than my home PC, but in trying to create my first project, I am not able to simply import a jpg to do a slide show with music. It gives the error "Unable to open file [xxx....xxxx...jpg]. ! File format mismatch [16803:1:3]"
I have of course scoured the web and have seen some other users struggling with the same error. So far all I've seen is that it may be the video card or Update to the Graphics board driver. I'm not too techy though I work at HP...and am really nervous about altering any updates on my work laptop. I haven't yet tried any updates or patches thinking that if I just got this, shouldn't it be the latest? I was successful in importing video from an iPhone and I've been successful with mp3 audio files as well, but the jpg's just aren't working. I even tried converting the jpg files to pdf format - but that's not supported I see as an importable file.
I have also noted that if I try to view the sample pictures from the library, it tells me "Original file [C:program filescorelcorel videostudio pro X4samplesimagexxxxxJPG] doesn't exist. I am able to view the sample video clips. But when looking at where Corel was saved on my system, it didn't default to "Program Files" which I thought is what it stated upon installation, but it put it in "Program Files (x86)" So I don't even know if I can relink to fix that. Even if I do, that doesn't solve my jpg fundamental problem. I hate to sound like a whiner, but I'm really discouraged and hope the fix is easy after spending so much for a reliable Video SW program. My wife's best friend passed away and I've promised a tribute slide show for her wake to be completed in the next 2 weeks.
I have just download and installed Corel VideoStudio Pro X4. Mainly with the expectation I could import and work with MTS file formats.
However I've gone to import them and it comes back with a file format mismatch error. This doesn't make any sense to me, as I read up on it and thought the program could work with these files.
The files that I want to import are very big, eg/ 206mb and 418mb. Do I need to downsize these to work with them? If so, how do I do this?
I have Corel VideoStudio x2. I am trying to open an mp4 video file and I get this error message; Unable to open file [C:xxxxx.mp4]. File format mismatch. [16803:1:2] I can play the file with Windows Media Player, so I know it runs ok.File came from a cell phone device.
I am trying to add a few sounds to the library so I can use them in my project. I downloaded a few wav files and when I try to import them in my media library, I get the message that File format mismatch.
I did import wav files in the past without any issue. Is there something else to wav files than just the name and extension which could be causing this error?
I have been trying to import AVI (H.264) files but keep getting the file format mismatch. The files all open, play and edit (WMM) on my laptop but not on VS. Other file formats seem to be fine but I wanted this program for its HD capabilities. The files,on sdhc card are from a Veho Kuzo camcorder. how do I set up the preferences so that the program can see these files?
I have used an exceptionally good website called [URL]...... for a number of years with no problems. I have just downloaded from them a .mp3 file lasting 5 minutes but when I come to load it into my project , I get an error message saying "File format mismatch". The only difference that I see between this and all the previous files I have downloaded from them is that this one has a bitrate of 320kbps compared to the previous ones of 130-190kbps.
I just installed VS X5 and tried to import a video from my GoPro Hero3 Black. Two Videos will work but all the others will not. I keep getting "file format mismatch" error.
I'm trying to insert stills into my project and I keep getting the "file format mismatch" error. I've tried JPG, PNG and even bitmap formats, I've tried different pictures from different cameras/sources and the result is the same every time.
Working with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
I copied the files over. I opened Ulead and tried to open the project I was working on. So it wanted me to Relink, which I did. But I got the error message: File format mismatch [16803:1:2] I checked the Smart Proxy.So I copied the files back to the old computer. I can open up the project with no problems.
I previously used VideoStudio 10 to capture and then edit my DV Camcorder files, this was on Windows XP and I never had any trouble with this. I have just captured my final DV tape with this camcorder (I'm about to get a new camcorder) on this old PC, however I have now got a new Windows 7 PC, and am now trying VideoStudio Pro X4. I have moved this captured AVI file to the new PC but as soon as I try to import it into VideoStudio I get the following:
File format mismatch 1081:1:3
I have used some other software to convert the AVI file into a DVD compatible MPEG2 file, so I guess I could do my editing on this instead if all else fails?
In VideoStudio X4 (SP1), I am trying to import an edited (VSX4) project into the library in order to use parts of it in a different project. This is something I have done successfully before but the last couple of times I have tried I get the message: “Unable to open file. File format mismatch”. (1081:1:3) There is no problem opening up the project in the normal way it is only when I try and import it into the library. I have compared the properties of these files with the successfully imported files and, to me, they look identical. They were all captured from video in the same way,
I have tried to add JPG images off my laptop to Video studio and every time I attempt to import an image into it, it comes up with a message the runs along the lines of ''unable to open file, file format mismatch, [16803:1:3]''. I took the pictures with my Canon G9, but I also took video with my G9 and strangely enough the video will import and play. I do really like the Corel software and I am disappointed that this problem has occurred.
I am getting a File Format Mismatch error when I try to import .jpg , .png or .bmp files into Video Studio 5x. and 6x (trial version).If I try using the file menu (Insert media file to time linephoto), I get an error dialog that tells me I can't insert the file because of a few different reasons.
If I try using the Import Media Files folder icon, I get a File Format Mismatch Error. I can open these files with MS Paint as well as Paint Shop Pro so there is no issue with the files themselves. Also, if I just drag and drop the files from File Explore to the StoryBoard frame, I don't get any errors and I can render my video. Since I have two copies, I installed one on my vista machine and I don't get that error. I can import .avi movie and .mpg files with no error.
I also installed Service Pack 1 for Video Studio 5x. I am running Win7 64 bit home premium SP1.
This is driving me up the wall, I have pro X4 on my laptop and computer, I can't edit on my laptop as it lags, maybe Corel is too big for my laptop I don't know. On my laptop it allows me to import AVI. files, however, when it comes to my PC, it doesn't.It doesn't make sense how I CAN on my laptop but CAN'T on my pc, It did used to work fine on my pc when I had X2, but towards the end it started making the same error message
'Unable to open file [N:GFFILE309.AVI]. File mismatch'
I'm losing my temper, converting the files isn't an option as it makes my HD footage look like crap and pixilised, it also takes forever. I am at a dead end, I have installed the Corel Videostudio pro x4 codec and that hasn't worked at all.
I have just started getting an error code saying "File format Mismatch" when I attempt to save a VPS file as an mpeg. I've been doing this for years now I get this error code.
I am usin the trial version of VideoStudio. After a lot of fiddling about (VideoStudio didn't recognize my camcorder) I was able to see my video clips in VideoStudio by placing my memory card in an external card reader. Whilst all the clips appear, VideoStudio informs me that there are no valid video clips.
I'm editing MTS files/AVCHD. Footage filmed with a panasonic cam, using Pro 6, when I hit share tab - create video file - I have many choices but I would like to save it as high format as the original, so do I hit , (Same as First Video Clip) or (AVCHD) both are nearly the same I'm guessing, I've saved in both formats and both ended up been the same size. What one I should save to ? I have added the properties of the original file.
