VideoStudio :: Rendered Video Is Sharper During Transition
May 5, 2012
Is it normal for video to be sharper during the CIRCLE transition and then return to the 'normal' sharpness at completion of the transition.
I have just rendered a project which contains quite a few transitions including Crossfade, Side, Spin, Face and Circle. Every time I have used the Circle transition the image 'inside' the 'circle' appears sharper until the 'circle' fills the screen (i.e. the end of the transition) when the image appears 'normal'.
I think that there is something wrong with CIRCLE transition as I have also noticed that it does not display correctly (preview window goes black) when you 'drag' the scrubber along the timeline.
View 8 Replies
ADVERTISEMENT
Aug 11, 2011
When my project is rendered... and put on a DVD, is it possible to later change its narration to another language? I ask since I notice that, once rendered, the music, video and narration tracks become one. Is there a way of later separating them, say for changing the language of narration for viewing in another country?
View 14 Replies
View Related
Jun 28, 2011
I'm using Ulead VS 11. When I make a clip and render it as new video, the new video is repeating frames all over the place. As it renders I can see it happening. It's like the video renders minute/second 1:01, then jumps back to 1:00, then re-renders 1:01. All over the place. These repeat frames are not in the original video.
The format of the original video is MPEG2, 8000 bps, and is being converted to WMV (don't ask!). I have found that the only way to retain any semblance of quality in the new video is to change it to WMV, and for my purposes, this is adequate. I have tried about 10 of the different output formats offered in the "Create Video" option, including saving with settings the same as project settings, and the result is the same, with the exception that the WMV 720 is the only one where a decent quality is maintained. That's a whole other question -- why rendering with "same as project settings" gives me total junk.
Is there some other setting that could be causing these frame repeats? I don't believe I had these problems when the original video was WMV rendering to WMV. But MPEG2 to MPEG2 is not fixing it either, so there must be something else.
View 8 Replies
View Related
May 20, 2011
I have noticed this in a couple of videos I've done now, I put together some aerial footage I have done, and after I render it there is a low click-thump sound, almost like a slow heart beat. This is not in an added audio track, and it does not do this in the preview.
I am uploading a clip to youtube as I write this, (will update when done) where I left the native audio in place the whole time (rather than add a music track) so it can be heard.
The raw files are MP4 files from a GoPro HD Hero camera.
ps. in this video, you can hear the sound I am talking about, but only until I fade it out and start the music track
View 11 Replies
View Related
Sep 20, 2011
I just bought Video Studio Pro x4
Now I am trying to render a clip which is mpeg 2 format to wmv, it does that no problem, but on the play back it seems to sutter a lot,
no i need to decrease the frame rate or what?
View 1 Replies
View Related
Jun 5, 2012
I just rendered a video slide show that liberally uses pan and scan zooming for every photo and it looks like garbage. It's jumpy and jerky with almost every pan and scan. I used the highest mpeg conversion quality but didn't mess with much else. Is there something I can do to make it not do that? It seems like it gives you the option to use a different mpeg rendering engine if you want...
What a drag. It took me 2 weeks to put this thing together and the final version looks like crap.
View 2 Replies
View Related
Oct 3, 2012
I’m using VS Fx4 and I am having a problem I have not experienced before. The audio in my Music Track has an annoying “pop” occurring. The pop does not occur when viewing the project (.VSP), only after it has been shared/rendered.
At first I thought that perhaps the poor quality was due to running other processes while the video rendered or something to do with the video format being used, however rendering the videos after hours and switching video formats (.wmv & .mpeg4) have not worked. You can view one of the videos I’m having an issue with here: [URL] ... The audio pop is noticeable in the first few seconds of the video.
I have two video files that are currently having this problem, both have Music Tracks.
View 3 Replies
View Related
Aug 24, 2011
I have a number of video files captured at 1080X720 full frame resolution at 29.97 frames/second, shown on my PC as .MOV files.
When watching the original files either on my PC or TV, movement is fluid and smooth.
When watching a finished video created via VideoStudio Pro X4 using the aforementioned files, movement is jerky, and is particularly noticeable when watching a panned scene. The effect is so bad that it makes viewing on a large screen impossible as the picture movement jerks/judders about. I have looked at the project preferences, and notice under Project Option>General tab, the only available frame sizes are the standard ones which only go up to 720X576. The radio button to select a user defined frame size is greyed out and cannot be selected to input my own frame sizes. I’m therefore unable to actually input the frame size of the source video files.
Basically how do I render a finished video without jerky movement?
View 12 Replies
View Related
May 29, 2011
I have always rendered my projects to DVD (mpeg) video files and then used those to 'create disk' (ie create movie).
I also thought that to prevent 'create' disk' from rendering again that all the attributes (constant or variable, kbs, audio compression) used during rendering must be the same as when creating disk.
Is there any benefit from creating a movie (for burning) using either method? Is it faster overall 'creating disk' using project files than rendering first? The reason I ask is that today it seemed to take 'forever' to 'create disk' using pre-rendered files.
I realise that you always see the warning that 'this action will take some time to render' but I thought that if all the attributes were the same that no rendering was done.
View 14 Replies
View Related
May 27, 2012
I've made several dvds over the past 12 months or so and this has not occured but on my latest venture I am getting a nano-second of the video picture narrowing from wide screen during each transition. It then almost immediately goes back to wide screen, causing something like a sideways blink. I am mainly using crossfades with the occasional circle wipes, clocks and spins. This does not occur, however, when using crossfade on the still images, which I pan and zoom, and include at the end of the video.
I am using a JVC Everio Camcorder with a Medion Akoya E600 D (MD8328) PC with Windows Vista 32bit.
I have tried several methods of creating the video file: Same as Project Settings, Same as first Video Clip, MPeg Optimiser and even custom, all with Upper Field First and all with the same result.
View 14 Replies
View Related
Mar 11, 2013
After creating a DVD or HD Blu-ray disc to watch on my HD TV the video skips after every transition effect while watching the DVD or HD Blu-ray disc on my tv's and computers. The videos do not skip when I upload them to the internet.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
[Code].....
View 5 Replies
View Related
Feb 26, 2011
When I apply a transition to a clip on the overlay track (and/or title track) the transition is applied to the video on the video track... even if the clip on the video track is 'in the middle' to where the transition is on the overlay track. e.g. If I apply a dissolve (or any transition) to the overlay clip... the clip on the video track will go through said transition also. VSX4
In other words, the clip on the video track goes through the transition applied on the overlay or title track.
This does not seem right. I saw nothing in preference that would affect this and I saw no way of 'de-parenting' the video track with the overlay or title track. (By de-parenting I mean separating the tracks so what happens on one does not affect the other.)
View 14 Replies
View Related
Aug 30, 2011
i wanted to try it because of its flexible overlay capabilities. I have a main video on the background and i want a small overlay video to appear on top of it, but to come in with a transition. I couldn't make the transition to effect only on the overlay video, it effects the whole video (both main and overlays together). Is there a way to make it work only on the overlay video?
View 10 Replies
View Related
Nov 12, 2011
I am in the process of giving Video-studio another chance, in that I am testing VSX4 TBYB, Let me say - its a close tossup between Cyberlinks latest Power Producer and its amazing speed and quality output albeit a little more fiddly, and well to be honest if it were not for Video-Studio's past history being so fresh in my mind the decision would have been easy..
Anyway - So far my clips captured with my new Canon Legria HF-G10 don't show any evidence of that Old AVCHD editing blip or mismatched frames around a transition when working with raw AVCHD Files,
So is it safe to assume that the problem is now redundant for good!????? Or have I just been lucky so far - or is that unlucky? in that the TBYB is coded differently to the Ultimate version which I may or may not end up getting..
My other concern was and still is the fact that some of my old raw MP4 video clips can not be directly imported into VSX4 TBYB as they could when I tried VSX3 TBYB version before I ended up deferring, so I am wondering whether this only applies to the VSX4 TBYB seeing VSX3 TBYB had no problems? or is that another major issue that Corel just cant get right, what with only the occasional version capable of working with all multimedia files out there..
Which reminds me is anybody else noticing a significant contrast and detail loss even after smart rendering with VSX4? or is this only because I am using a TBYB version and thus full 25 Mbit Rendering is available in the Ultimate version?
View 4 Replies
View Related
Dec 2, 2011
Firstly note I am using Videostudio Pro X4.
I have noticed many times that when I add the CIRCLE transition between two video clips that when I drag the 'scrubber' along through the two clips and transition, when the scrubber goes past/through the circle transition the preview window goes blank (displays black).
If I change the CIRCLE to any other transition it displays (the transition) correctly but as soon as I put the CIRCLE back it once again only shows BLACK.
If I PLAY the project the CIRCLE transition displays correctly - it is only when dragging the scrubber that the problem exists.
Is there a known problem with the CIRCLE transition?
View 4 Replies
View Related
Oct 10, 2011
Any good video codec to combine a rendered image sequence into a lossless video clip to use in video editing applications. I have tried using the Quicktime Animation codec, but it always drops a frame, for example, a 0-90 frame animation gets combined into a 89 frame video clip. This causes problems when trying to fade clips into one another, as the animations will not line up.
View 9 Replies
View Related
Mar 8, 2012
I'm trying to do my first timelapse video and am having problems rendering the video.I have Photoshop CS4 extended. When I try to find Window -> Workspace -> Motion I can't see 'motion'.
Then when I try to File->Export->Render Video I get the error message 'The procedure entry point CFWriteStreamGetTypeID could not be located in the dynamic link library CoreFoundation.dll After pressing 'ok' a few times I also get error message 'Theprocedure entry point CFPreferencesGetAPPBooleanValue could not be located in the dynamic link library CoreFoundation.dll
I then am taken to the render video dialogue box, but when I click render I get the error message 'Could not complete the render video command because invalid parameters were sent to a command'
View 4 Replies
View Related
Jan 21, 2013
I'm using a new iMac and Pegasus R6. If I put 1080 ProRes footage on the timeline it plays fine with the unrendered resize on it. Resize is only changing bit depth. The minute I render the clip, it will no longer play without dropping so many frames that it is unusable.
View 3 Replies
View Related
Apr 5, 2014
I'm a complete amateur and did some stupid things. Like shoot everything on my iPhone at 120fp.
Everything imported fine and played great in the the Source and Program monitors, and I could drag any of the clips into the Timeline and they would all play fine, all at normal speed (30fps).
When I fully render them, however, they play in the Timeline at 120fps, and the audio stays the same. In the montors they still play at 30, though. When they're just rendered for playback ("yellow"), it's fine. I would leave them unrendered, excpet sometimes they get rendered automatically, and I can never get back to regular playback speed for those clips.
But even better, when I export, all is well, and is at 30fps.
So, is there some way to make them play at 30fps, even when fully rendered, in the Timeline? Or even if there's just a way to convert them. (I'm likening the framerate thing to audio sampling rate. And made similar mistakes back in the day!) I looked at the "Interpret" option, but must not have fully understood it, since the results were disastrous.
Anyhow, that's about it. I'm not sure if it's germaine, but I did also bring in some 30fps stock footage. Just did a straight import. Same thing happened.
In Pro Tools, you can change the sampling rate of a "Session", is there a similar setting that I'm missing?
View 3 Replies
View Related
Feb 8, 2014
I am using Lightroom 5 also to color grade some of my short videos as it seems to be pretty handy. Unfortunately, for some videos the export fails with the error that the hard drive does not contain rendered images. The screenshot below shows the error message in German.
As I was using the same options for many other videos before, I was wondering what causes this error. The hard drive where I have the lightroom catelog is an external USB3 hdd with lots of space left.
View 2 Replies
View Related
Jul 24, 2012
Recently I have decided to give client viewings of their wedding photographs rather than an online gallery as I feel it's more personal and has better impact on a large TV screen with added music. I really like the simple LR interface and have gotten around the well known music feature issue by splicing tracks in Audacity.However, the last time I tried to use the 'export to video' function it took about an hour to create 25% of it (370 photos), so I had to abandon it and take the whole PC. This time I left plenty of time and it was running overnight, and yes, a lovely MPEG-4 is now sat in my video files.
I've just played it back and it seems to have lost all the timings that I meticulously spent hours perfecting. The 2.6 second duration I have set is much shorter and now all the slides don't fit with the music. I've been back to check settings when exporting and there are no options at all. Am I missing something or is export to video still in it's infancy?
View 7 Replies
View Related
Aug 26, 2011
Brand spankin' new user to X4. I'm working on a fairly simple slideshow that starts with a 15 second MOV file, followed by 10 pictures at 3 second intervals along with some background music. The issue I'm having is that when I go to generate a WMV file (or any format), X4 renders multiple times and spits out multiple files.
I'm sure there's a setting somewhere that I haven't set properly...
View 5 Replies
View Related
Apr 26, 2013
I must have turn off a switch somewhere, after rendering a project I found the music track is not included. I can hear the music track in edit and preview. But after render the project, the audio attached with the video is ok except no music.
View 1 Replies
View Related
Jun 7, 2013
basically my 24fps footage isn't rendering smoothly ON X5 Ultimate.
[URL]
What i've done is put the same clip together twice, as strangely the first clip is smooth, then subsequent clips are all jerky. This has been going on for some time, so switched to 25fps. 25fps from my Canon 5D MKII wasn't as good as 24fps, so switched back and decided to try and sort this out.
I have been through multiple settings, deleted all older versions of Corel, removed then re-installed X5, made sure all patches and updates were installed - made no difference.
View 14 Replies
View Related
Nov 15, 2012
Using X5, I've been assembling video clips taken on holidays into small, specific topic mini-movies (say about 2-3 mins long each) for friends and family, and I've noticed an odd effect of rendering using the MPEG optimiser option when creating a video file from a set of project parts.
All the source clips have a 16.9 aspect ratio. The project file has full, trimmed, and cut clips, plus text, voice over and music.
Put together in a project file, the various clips fill the small or large display windows, as one would expect. Trimmed and cut clips made not difference to the display when playing. But the rendered result of that project file shows irregular "jumping" of the image aspect ratio: sometimes, it's the full display window, at other times it looks like the image is full width but there are black bars top and bottom, and still other times the reverse - bars on the side with a full vertical image.
Those latter characteristics are symptomatic of a 4:3 image converted to 16:9, and I promptly checked to make sure the sources were all 16:9, and they were. The jumping seems to happen within rendered clips and when a clip transitions from one to the next, but not every time. When it happens within a clip, the display 'flickers" as the aspect ratio changes and its that flicker that originally drew my attention to what seemed to be happening.
View 2 Replies
View Related
Sep 16, 2010
I am having trouble with the clarity of some photos being used in a project. The project has a mixture of both photos and video. The photos are inserted into the overlay tracks in the time line and some have a mask applied to them.
Some photos both with and without mask's appear pixelated both on the time line and when rendered.The file format for the photos are Jpeg and range from 1.85MB to 60MB in size and have no pixelation. In preferences i have in the image section both "anti-flickering" and "Cache image" checked. I have also tried the photos in the first time line and still are not clear.
View 5 Replies
View Related
Jul 19, 2012
I bought the new Olympus TG-1 camera, and want to edit movies that I shoot so I downloaded trial of latest Video Studio Pro X5 to try it out. But I'm not satisfied with the quality of the rendered file. The result is not smooth. For example, I shot a short movie clip out of the window of a slow moving train. When I play the original file everything is nice and smooth, but when I import the file to Video Studio and render it (without doing anything to it, no effects or anything) the result is a stuttering movie - kind of like some frames are missing, or maybe duplicated... (Sound is just as it should, no problem there.)
Source file is .MOV (quick time) 24bits 1920x1080, 29.970 frames/sec according to file properties in Video Studio. Using GSpot i get the following: codec avc1, name H.264, 19641 kbps, 29.971 frames/sec
I've tried every format under "create video file" in Video Studio but the result is the same every time no matter what I do, although the option "Same as first video clip" is not available (it's dimmed when using clip shot with this camera). My system is PAL and I know that 29.97 fps is not PAL standard, but I also tried rendering custom format where the result was a 720x576 clip with 29.971fps (but kpbs is only 1024) but still the same stuttering movie.
View 3 Replies
View Related
Apr 13, 2013
I have Canon 60d original footage shot at 1080p 25. The clip is only 9-1/2 sec long. When I play the clip straight out of my pc folder inside VLC the clip is smooth. The moment I import the clip into VS proX5 timeline and straight away, share / create video file / AVCHD / 1920x1080p preset, VS introduces 4 dreaded stutter problems into the render finished product which is very noticeable and ugly to watch.. I am in PAL land and VS was installed to PAL. I have also tried the WMV hd1080p preset and mpeg-4 and the results where just as disappointing.
View 10 Replies
View Related
Oct 26, 2011
I want to re-edit -remove some parts, adding a title- a fullhd VSX3 rendered file which looks and plays perfect. I never have problems with VSX2/3 even when re-editing. This time, it first takes seconds before it opens in the preview window when I click the library tumbnail. It freezes (with created or without smart proxi) for several seconds when I try to cut, or whatever on the timeline.
It only gets somewhat better when de-selecting "audio while scrubbing", but remains still much more "freezy" than all my other (rendered) files. It's a ~2.5 Gb AVCHD file rendered at 18Mb/s VBR in VS. The only thing what is different is that it contains (pre-converted to AVXHD) SD parts from a JVC camcorder (.mod), but it all plays back flawlesly in several HW and SW players.
View 3 Replies
View Related
Jan 29, 2012
i just update my old VSX2 to the new just bought VSX4, and i was surprise to discover that the number of album transition is decreased from 7 in X2 to 1 in X4.
so, is there any possibilities to keep the album transition from X2 in the new X4.
what's happen whe i will try to open my old VSP Project using these trainsition in the X4 product ?
View 2 Replies
View Related
Sep 17, 2011
I just added 3 new blue fx transition packages to VS Pro X4 and have others to add ( boris, canopus, adorage).... I noticed that the first 2 new blue packages ( 3d explosions and 3d transformations) were successfully added to their own category in the drop down list of transition effects, so now the list includes the new blue sampler that Corel provided, and both these additional packages. When I added the third package New Blue Paint Blends, it did not appear in its own category but the effects are present when you click on "all".... ( which is a nuisance to search through). I'm wondering if the problem that existed in VS2 where by there were a limited number of transition categories you could have is still a problem in VS pro X4 or whether this is an issue just for Paint Blends. I'd like to know before I add on the other packages... I hate for all the effects ( 100s of them) to end up in my "all" list.
Also is there any way to manipulate this list... and force a location?? I can only see that all the effects are listed individually in the Vfx_plug folder.
View 9 Replies
View Related
