Any good video codec to combine a rendered image sequence into a lossless video clip to use in video editing applications. I have tried using the Quicktime Animation codec, but it always drops a frame, for example, a 0-90 frame animation gets combined into a 89 frame video clip. This causes problems when trying to fade clips into one another, as the animations will not line up.
View 9 RepliesI am wanting to render video with the H.264 codec. Then I am wanting to copy this file and place on a DVD. (No Authoring in Encore). I have done this several times and the video is choppy. The file plays normal when it is running from the hard drive.
View 4 Replies View RelatedI've seen animations that were taken from music videos or movies but not the typical square or rectangular shape but asymmetrical etc. I've even seen an animation shaped like a cloud.
How the heck do I do that? I know how to make animations but how do I get them to be oddly shaped.
I'm trying to do my first timelapse video and am having problems rendering the video.I have Photoshop CS4 extended. When I try to find Window -> Workspace -> Motion I can't see 'motion'.
Then when I try to File->Export->Render Video I get the error message 'The procedure entry point CFWriteStreamGetTypeID could not be located in the dynamic link library CoreFoundation.dll After pressing 'ok' a few times I also get error message 'Theprocedure entry point CFPreferencesGetAPPBooleanValue could not be located in the dynamic link library CoreFoundation.dll
I then am taken to the render video dialogue box, but when I click render I get the error message 'Could not complete the render video command because invalid parameters were sent to a command'
When my project is rendered... and put on a DVD, is it possible to later change its narration to another language? I ask since I notice that, once rendered, the music, video and narration tracks become one. Is there a way of later separating them, say for changing the language of narration for viewing in another country?
View 14 Replies View RelatedI'm using Ulead VS 11. When I make a clip and render it as new video, the new video is repeating frames all over the place. As it renders I can see it happening. It's like the video renders minute/second 1:01, then jumps back to 1:00, then re-renders 1:01. All over the place. These repeat frames are not in the original video.
The format of the original video is MPEG2, 8000 bps, and is being converted to WMV (don't ask!). I have found that the only way to retain any semblance of quality in the new video is to change it to WMV, and for my purposes, this is adequate. I have tried about 10 of the different output formats offered in the "Create Video" option, including saving with settings the same as project settings, and the result is the same, with the exception that the WMV 720 is the only one where a decent quality is maintained. That's a whole other question -- why rendering with "same as project settings" gives me total junk.
Is there some other setting that could be causing these frame repeats? I don't believe I had these problems when the original video was WMV rendering to WMV. But MPEG2 to MPEG2 is not fixing it either, so there must be something else.
I have noticed this in a couple of videos I've done now, I put together some aerial footage I have done, and after I render it there is a low click-thump sound, almost like a slow heart beat. This is not in an added audio track, and it does not do this in the preview.
I am uploading a clip to youtube as I write this, (will update when done) where I left the native audio in place the whole time (rather than add a music track) so it can be heard.
The raw files are MP4 files from a GoPro HD Hero camera.
ps. in this video, you can hear the sound I am talking about, but only until I fade it out and start the music track
I just bought Video Studio Pro x4
Now I am trying to render a clip which is mpeg 2 format to wmv, it does that no problem, but on the play back it seems to sutter a lot,
no i need to decrease the frame rate or what?
Is it normal for video to be sharper during the CIRCLE transition and then return to the 'normal' sharpness at completion of the transition.
I have just rendered a project which contains quite a few transitions including Crossfade, Side, Spin, Face and Circle. Every time I have used the Circle transition the image 'inside' the 'circle' appears sharper until the 'circle' fills the screen (i.e. the end of the transition) when the image appears 'normal'.
I think that there is something wrong with CIRCLE transition as I have also noticed that it does not display correctly (preview window goes black) when you 'drag' the scrubber along the timeline.
I just rendered a video slide show that liberally uses pan and scan zooming for every photo and it looks like garbage. It's jumpy and jerky with almost every pan and scan. I used the highest mpeg conversion quality but didn't mess with much else. Is there something I can do to make it not do that? It seems like it gives you the option to use a different mpeg rendering engine if you want...
What a drag. It took me 2 weeks to put this thing together and the final version looks like crap.
I’m using VS Fx4 and I am having a problem I have not experienced before. The audio in my Music Track has an annoying “pop” occurring. The pop does not occur when viewing the project (.VSP), only after it has been shared/rendered.
At first I thought that perhaps the poor quality was due to running other processes while the video rendered or something to do with the video format being used, however rendering the videos after hours and switching video formats (.wmv & .mpeg4) have not worked. You can view one of the videos I’m having an issue with here: [URL] ... The audio pop is noticeable in the first few seconds of the video.
I have two video files that are currently having this problem, both have Music Tracks.
I'm using a new iMac and Pegasus R6. If I put 1080 ProRes footage on the timeline it plays fine with the unrendered resize on it. Resize is only changing bit depth. The minute I render the clip, it will no longer play without dropping so many frames that it is unusable.
View 3 Replies View RelatedI have a number of video files captured at 1080X720 full frame resolution at 29.97 frames/second, shown on my PC as .MOV files.
When watching the original files either on my PC or TV, movement is fluid and smooth.
When watching a finished video created via VideoStudio Pro X4 using the aforementioned files, movement is jerky, and is particularly noticeable when watching a panned scene. The effect is so bad that it makes viewing on a large screen impossible as the picture movement jerks/judders about. I have looked at the project preferences, and notice under Project Option>General tab, the only available frame sizes are the standard ones which only go up to 720X576. The radio button to select a user defined frame size is greyed out and cannot be selected to input my own frame sizes. I’m therefore unable to actually input the frame size of the source video files.
Basically how do I render a finished video without jerky movement?
I have always rendered my projects to DVD (mpeg) video files and then used those to 'create disk' (ie create movie).
I also thought that to prevent 'create' disk' from rendering again that all the attributes (constant or variable, kbs, audio compression) used during rendering must be the same as when creating disk.
Is there any benefit from creating a movie (for burning) using either method? Is it faster overall 'creating disk' using project files than rendering first? The reason I ask is that today it seemed to take 'forever' to 'create disk' using pre-rendered files.
I realise that you always see the warning that 'this action will take some time to render' but I thought that if all the attributes were the same that no rendering was done.
I recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons. If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)Photoshop.exe
Faulting module path: C:Program FilesAdobeAdobe Photoshop CC (64 Bit)MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.
I'm a complete amateur and did some stupid things. Like shoot everything on my iPhone at 120fp.
Everything imported fine and played great in the the Source and Program monitors, and I could drag any of the clips into the Timeline and they would all play fine, all at normal speed (30fps).
When I fully render them, however, they play in the Timeline at 120fps, and the audio stays the same. In the montors they still play at 30, though. When they're just rendered for playback ("yellow"), it's fine. I would leave them unrendered, excpet sometimes they get rendered automatically, and I can never get back to regular playback speed for those clips.
But even better, when I export, all is well, and is at 30fps.
So, is there some way to make them play at 30fps, even when fully rendered, in the Timeline? Or even if there's just a way to convert them. (I'm likening the framerate thing to audio sampling rate. And made similar mistakes back in the day!) I looked at the "Interpret" option, but must not have fully understood it, since the results were disastrous.
Anyhow, that's about it. I'm not sure if it's germaine, but I did also bring in some 30fps stock footage. Just did a straight import. Same thing happened.
In Pro Tools, you can change the sampling rate of a "Session", is there a similar setting that I'm missing?
I am using Lightroom 5 also to color grade some of my short videos as it seems to be pretty handy. Unfortunately, for some videos the export fails with the error that the hard drive does not contain rendered images. The screenshot below shows the error message in German.
As I was using the same options for many other videos before, I was wondering what causes this error. The hard drive where I have the lightroom catelog is an external USB3 hdd with lots of space left.
I use photo shop 6. I am trying to import music from my I tunes library to a slide show but it tells me my system does not have the required CODEC installed. What should I do?
View 3 Replies View Relatedhas images container and codec like videos?
png, jpeg, gif etc are codec or container?
I'm planning my purchase of a D7100, and would like to understand the software updates that would be required to process raw files in Photoshop. My current software is: Photoshop CS5.1, Camera Raw is 6.7, Codec 1.12, and Windows 7.
The Adobe website indicates that I need to upgrade the codec to 1.18. I'm OK with that. But, will that codec work with the versions of camera raw and Photoshop that I currently have?
I am creating my first slideshow from Photoshop Elements 10 and get the error message that the proper codec is not installed. I have already converted the original .m4a file to .mp3, and that .mp3 file will play in Windows Media Player. But I cannot add it to my show.
View 1 Replies View RelatedSeen here on several places on the forum that VSX4 dislike the LAME MP3 codec. Trying to create an .avi-XviD with MP3 audio, so my question is where to get an MP3 codec for the audio in my XviDs that's workable in VSX4?
View 5 Replies View RelatedI have received a bunch of files that are named "clip.dv". I can play them using VLC Media Player. It tells me the file type is "DV Video (dv )". Video Studio X4 will not allow me to import the file.
View 6 Replies View RelatedI shoot video with a canon DSLR and love the quality but hate editing with the H.264 codec straight out of the camera. Because of this, I want to create proxy files of a lower resolution and a better codec for editing. I work on a windows 7 laptop, 64 bit, 16gb ram, i7 processor and a Nvidia Gtx-650 (It's an alienware m14x R2). I am looking for a good codec to edit smoother and export for the web and Dvds. Since I edit on a windows machine, I don't have access to apple's pro-res which I hear is great for editing. Are avid's dnxHd codecs comparable?
View 3 Replies View RelatedI installed Adobe CS6 (As a Trial, i'll install the license in three days)I
It does have the Video Format h264, and not the codec h264, and i need it because i'm rendering videos (AVI) that ends with like 60 GB (11 minutes) and that's pretty bad. ( I tried with MPEG-DVD but quality is horrible on a TV Screen)
how to get h264 codec? Does it come with the license?
how I would install the RAW codec for CS3? I looked at the instructions, but I do not have "c:Program FilesCommon FilesAdobePlug-InsCS3File Formats" since my Photoshop is installed on the D Drive. I tried adding the plugin to "D:Program Files (x86)AdobeAdobe Photoshop CS3Plug-InsFile Formats" but that didn't seem to do anything (after closing and reopening Photoshop, it still says that it can't open the file).
View 3 Replies View RelatedI originally thought I would revert to IE 8, I thought it was because I had switched to IE 10. But I did find someone who blamed it on IE 8, so at this point IE is no longer my default browser.Windows 7 Pro 64-bit on my home computer with IE 10. often when I click on a video or a link on a web page, the attached jpeg comes up, the window turns black and I have to use Task Mgr to kill IE. So until I get to the bottom of this FF is my browser.Is it malware or a virus? MSE and Malwarebytes Pro up to date and frequent scans.
View 1 Replies View RelatedI have a Canon PowerShot camer and make videos using .avi. I just bought the Premiere Elements 11. Befoer I bought the program I made sure that it said it would work with .avi files. When I try to upload an avi it says "This type of file is not supported, or the required codec is not installed".
How do I obain and install the required codec? I have already loaded up all the software that came with the camer, and that software works fine; I assume it already has the required codec. But how can I get Elements to use the codec?
I am running a PC with Win7 & PPro CS6
I have a bunch of clips that were copied over from iMovie imports (no original files exist anymore)
They are all a special form of .mov
I can play them in VLC Media Player (but not Quicktime, or WMP) so I know that a pc can handle them...
When I import into CS6 I get an errorsaying Codec missing or unavailable...
Whered can I get the proper Codec?
I've had an issue over the last couple weeks with Ae CC where any time I output to uncompressed (audio) codec, no audio is attached. I've verified that my output module was set to Audio Output On. Bringing the file into Pr or back into Ae shows that there is no audio track, even though the setting should have at least made a silent audio track. This happens regardless of the audio format in my composition (.wav, .aif, .mp3), and seems to only occur with uncompressed codec.
Ae CC v12.0.0.404
Windows 7 64-bit
ever since I updated to the newest version of quicktime, any file using the Quicktime animation codec stutters and freezes on playback.
This has happened before, and rolling back to previous versions worked then, but isn't working now.
I've gone far enough as to format the computer and reinstall everything, but the problem still occurs. Every other codec seems to work fine. I can work around it by using other export methods, but it's a problem when I need to edit previous or co-workers projects on my machine.
Here are my specs:
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_rtm.101119-1850)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z87X-UD3H
BIOS: BIOS Date: 05/16/13 21:47:33 Ver: 04.06.05
Processor: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (8 CPUs), ~3.4GHz
Memory: 32768MB RAM
Available OS Memory: 32656MB RAM
Page File: 4053MB used, 61256MB available
Windows Dir: C:Windows
[code]....
Here's an example of how the image is now being displayed: