I am running a PC with Win7 & PPro CS6
I have a bunch of clips that were copied over from iMovie imports (no original files exist anymore)
They are all a special form of .mov
I can play them in VLC Media Player (but not Quicktime, or WMP) so I know that a pc can handle them...
When I import into CS6 I get an errorsaying Codec missing or unavailable...
Whered can I get the proper Codec?
I am using Premiere Pro CC, up to date, on Windows 7 Pro 64 bit. After week's vacation opened large project to find all clips offline. When I linked, they located fine but OK produce "the importer reported a generic error". I know the clips are on their hard drives and have not changed position. I am not sure of next step. I have always been able to link before though have not used "locate" dialogue box. Checking other projects reveals consistent problem with importer.
View 1 Replies View RelatedWe have an iMac workstation here running Premiere that will not open projects or import clips. Here's the sequence of events that led to this:
1. Premiere was locking up on the splash screen whenever it got to "ImporterQuicktime.bundle". I tried trashing preferences and launching with plug-ins disabled and received the same freeze. Based on forum recommendations I removed "ImporterQuicktime.bundle" and "ExporterQuickTimeHost.bundle" from the plug-ins folder inside the package. The software launched fine - but none of the Quicktime files in the project were working. So I then took copies of the above 2 files from the iMac next to this one, with the exact same configuration, and pasted them into the plug-ins folder. Since then - launching the software has generated the below errors.
2. Attempting to open any project gives a long error that starts as: The preset used by one or more sequences in this project requires third-party components that could not be located.
3. Starting a new project and attempting to drag any Quicktime ProRes media into the project gives the error: File Format not supported.
I have trashed the preferences, re-installed the Pro Apps Quicktime Codecs, de-authorized the computer and re-authorized it, and upgraded Adobe Premiere from 7.0 to 7.2. None of which fixed the issue.
I'm thinking about trying a complete re-install of Premiere next.
Here's the details:
Premiere Pro CC 7.2
Mac OS 10.8.5
iMac late 2012 model, 32Gb RAM, 2Gb video card
I download some avi files , but i find it does't work on imovie, how to do?
View 1 Replies View RelatedI've been working the last 6 months with 4 GH2s and ran into some strange troubles when initially importing them to the timeline. 2 hour shots are divided into 6 or 7 different files, and when brought into PP the first clips audio was assigned to all the other remaining clips. This was pretty strange, but I fixed it by using TSmuxer. It was added time in the workflow/set up, but in the end I could produce;
The latest update of PPCC now combines the entire 2 hours of footage into each of the 7 files being imported. So it is importing 2 hours of footage 7 times for each camera. The conforming is taking forever! For 4 cameras it's conforming 14 hours of footage each, when it should literally be a 7th of that.
It is taking up large amounts of time and disk space.
I am wanting to render video with the H.264 codec. Then I am wanting to copy this file and place on a DVD. (No Authoring in Encore). I have done this several times and the video is choppy. The file plays normal when it is running from the hard drive.
View 4 Replies View Relatedever since I updated to the newest version of quicktime, any file using the Quicktime animation codec stutters and freezes on playback.
This has happened before, and rolling back to previous versions worked then, but isn't working now.
I've gone far enough as to format the computer and reinstall everything, but the problem still occurs. Every other codec seems to work fine. I can work around it by using other export methods, but it's a problem when I need to edit previous or co-workers projects on my machine.
Here are my specs:
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_rtm.101119-1850)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: Z87X-UD3H
BIOS: BIOS Date: 05/16/13 21:47:33 Ver: 04.06.05
Processor: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (8 CPUs), ~3.4GHz
Memory: 32768MB RAM
Available OS Memory: 32656MB RAM
Page File: 4053MB used, 61256MB available
Windows Dir: C:Windows
[code]....
Here's an example of how the image is now being displayed:
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
My current workflow is to use 3ds max to render image sequences of animation, then to use Media Encoder to convert them to mov files using the Quicktime Animation codec. The problem is that using these clips in Premiere prevents me from scrubbing the sequence timeline fluidly, even tho all of the files are being accessed from a Thunderbolt drive on a Macbook Pro. Even opening them in the Quicktime player causes sluggish playback. The images rendered are 1280x720. Because of the animation being frame based, I need the derived video to not drop frames like some codecs do, so the Quicktime Animation codec prevents that and it preserves the alpha channel in the images. So my question is, what can I do to improve this so that scrubbing the timeline becomes fluid?
View 16 Replies View RelatedI have received a bunch of files that are named "clip.dv". I can play them using VLC Media Player. It tells me the file type is "DV Video (dv )". Video Studio X4 will not allow me to import the file.
View 6 Replies View RelatedI have installed the Canon camera software, Gspot and Quicktime. When I started computer next morning, it works!?
View 1 Replies View RelatedI'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.
I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.
I can tell you cannot Gateway Import from a drive that is Read-Only. The clip seems to work, it just says pending render, of course when you import a large number of files it always says pending render. Unfortunately it never actually finishes pending render, and will list as failed in Backburner.
So you can for instance think you have relinked an entire timeline and start doing a fair amount of work on it, but you will then be unable to send this large timeline to your flame like you think.
There is no god damned reason it should allow you to gateway import something that you cannot actually gateway import. All it would need to do is check if the drive is read only before it does it and give you an error message IN THE APPLICATION. Rather than everything looking fine, but then making you go tease the meaning out of this from backburner:
smk001 1896942624 swBIOSubJobServer.C:298 01/21/12:18:14:05.450 1896942624 swBIOAdapter.C:403 01/21/12:18:14:06.504 Cannot process tasks 0... in /var/tmp/WireJob/SubJob0.
Read-only file system on processing S+W server..The fact that the color correct house had randomly given me an NTFS drive this time didn't occur to me for quite awhile, since the last two were both macOS.
I really want to be able to use the new Synchronize feature of PP (Clip > Synchronize), but I tried selecting two video clips (a video clip, and two audio tracks), and right-clicking, but the option to Synchronize is greyed out. If I select certain clips, then it appears, but I don't see what the pattern is. It seemingly picks random clips to not sync.
View 1 Replies View RelatedI've been working on a project that involves 45 separate clips. I have cut the unwanted stuff out of each clip - was a lot easier than I thought - just dragged the start and end point icons. So now I have 45 clips which just need joining together. When I shot all the footage and uploaded it to my computer the file I saved as Clip 1 may not be what I want to start the movie with. How do I go about shuffling the order of the clips and combining them all into one to form my movie - and when I join two clips together does Premiere Pro automatically join the sound.
View 1 Replies View Relatedaudio clips, usually less than 20 seconds, are now being cut off at the last few seconds of the clip. Can't figure out wny it is happening or how to correct it. If I select Edit, Play Original, I can hear the full clip.
View 1 Replies View RelatedI am completing a 52-minute program, with 20 short sequences shot in ProRes 422 (50 Mbps) and saved to MXF OP1a files. The package looks good when output to Blu-Ray, but I will need to output for broadcast, and the broadcaster prefers MXF deliberables. My Question: Is there any significant loss of quality by saving 20 MXF files (with dozens of ProRes clips) to a final MXF container?
View 7 Replies View RelatedIt's listed as a feature numerous times in the forums but I haven't been able to export cut down stock footage as individual clips.
View 3 Replies View RelatedI have multiple sequences that use clips from an interview that show diagonal lines through them in the timeline. Not all files from the interview have these diagonal lines. These problematic clips do not contain audio or video when the playhead is on them. They don't even have a thumbnail pic in the sequence while other shots from the interview do. How I can get these to work in the timeline again?
View 8 Replies View RelatedI'm working on a Premiere Pro CC project with another editor. On his latest version, some of the clips on the timeline have a "+/-" or "+2" or "-2" on them. He's not sure how that happened, and I've not seen it before. What do those mean, and how do I get rid of them? I've tried Googling, but search engines don't respond well to "+/-".
View 1 Replies View Relatedafter razor cutting a clip (and doing other steps after it): is it possible to join the clip again?
Or is it the only way to delete the first or the second clip and strech the other? But this would be a little circuitous.
Add Edit don´t cut all the layers highlighted. When I insert or overwrite a clip into the timeline, the timeline don´t respect the highlighted layers (ex. if layer 1, 2 and 3 were highlighted and the clip were put in layer 1, clips on second and third layer should be deleted between in and out markers, but they aren´t.
The Ctrl+D and Ctrl+Shift+D commands (add transition) doesn´t work like the other versions too (respecting where the cursor is)the buttons to go to the next cut on timeline (in my keyboard, A and S) doesn´t work right too.I would like to know if these are bugs or the new Premiere CC is different from the others before.
I have to make a couple of changes to a piece I edited 2 months ago on Premiere CC. When I open the file premiere lists out several clips that it says are missing. I've hit "locate" but nothing comes up.
View 3 Replies View RelatedI'm working on a doc and need to attach my transcript to the clips. Looks like I need to do it in the Adobe Script format.
Where I can get Adobe Script?
I'm a CC member and it's not in my CC Apps.
I have a synced three camera project that I have almost finished editing. I want to select the last video clip in my sequence and roll it back, while keeping the audio in place. The idea is to fade the picture to black while the synced audio continues as credits roll over black. However, I cannot find a way to select video only on the clips at the beginning and end of the sequence. I can select and separate any video clip in the middle of the sequence, but not the clips at the ends. I must be missing some keystroke. How do I do it?
I am noe to Premiere Pro and am using version CC.
Nothing happens when I try to move the clips to the timeline. Have Windows 8.1. Premiere Pro CC.
View 3 Replies View RelatedI have received a project edited on PPro 7.1.0 with a number of Canon C300 spanned clips. I have PPro 7.2.1. When I relink the clips the spanned clips link incorrectly. In fact all the span clips have incorrect timecode. The original editor on PPro 7.1.0 brought in the span clips as individual clips with sequential timecode. When I import the clips they come in as clips all of the same length but the time code is way off eg a clip that should start at 01:01:31:17 starts at 01:17:18:18. This is really less than satisfactory and the fact that we need to hand this project back and forth is really going to make life very difficult. Adobe and Canon need to sort this span clip thing out.
View 34 Replies View RelatedEven though I've made sure that my sequence settings are exactly matching my clip settings (ProRes4444 or 422HQ) I'm getting a yellow bar over my sequence.
I'm working on a 2012 Mac Pro running OS 10.7.5. I downloaded Premiere Pro CC earlier today; I thought I'd play around with it to see how it compares to FCP7. Most of my NLE usage is very simple, just assembling sections of motion graphics and 3D animations rendered out of After Effects in the ProRes 4444 codec.
The "New Sequence from Clip" function isn't behaving as I'd expect. The comparable feature in FCP creates a sequence that matches all aspects of the selected clip (size, framerate, codec, etc.). The Premiere implementation appears to only match the sequence size and framerate to the selected clip.
If I create a new sequence from a ProRes clip, or tell the sequence to match the clip, I'd expect that clip to be sitting in my timeline with no bar of any color. But I get a yellow bar. When I go to Sequence Settings I see that the editing mode is Arri Camera, and the Video Preview is greyed out on an MPEG format. I have to go to Custom and manually select Quicktime, then specifiy the matching ProRes codec. Shouldn't those wrapper and codec settings be matched automatically too when I've specified that function?
That said, if I go in and manually match the codec settings to my clip I still get the yellow bar. If I select another sequence and click back on the new sequence the yellow bar is gone.
I'm assuming that this yellow bar issue is a display error of some sort, because if I export the sequence with "Match Sequence Settings" selected the export happens very quickly as I would expect with a Smart Render-compatible sequence.
I recorded video on a Black Magic Cinema Camera (BMCC), which has legendary video quality but an awful on-camera microphone with tinny recording process, and recorded audio on a Zoom H6 which has great low-noise, more bits and greater sampling rate capability.
In Premiere I made a Sequence containing the video footage, then added the H6 audio and synchronized it by waveform to the BMCC's audio, which I subsequently muted. I call this a Source-Sequence, as it is intended as a virtual source media item, to be cut into one or more Edit-Sequences (my term).
Not "holding my breath" but trying it anyway, in Premiere's Project/Bin pane, I selected that source-sequence then did RightClick > Analyze Content. Teasingly, that option was not greyed-out. However all options in the the resulting popup-dialog were greyed-out.
In this situation, to be useful, the speech analysis would need to be available to Sequences, not just to (Master) Clips. Obviously one could render such a sequence to intermediate but that would waste time and disk space and would essentially freeze the state of the Source (e.g. including any sync issues that might be discovered later, or whole-source color corrections issues etc.). If one subsequently altered that state, a re-render, re-link and re-analysis would be required. If a Souce-Sequence were used instead, and no alteration had been made to the audio (or if user indicated "don't care"), then there would in principle be no need for re-analysis.
Edited raw AVC/HD footage on Premiere Pro, but in preview and also when exported it flickers which it doesn't do on the original clip.
I've made 20 different sequences in this project without realising this issue! And I really want to avoid having to import all the clips again and re-edit.
Working on a 2011 MacBook Pro running cs6
I tried reimporting the video and translating it to another format, I've rendered it fully, and deleted temp files and re-rendered it. I rebuilt the video from scratch in a new sequence created from the clip (all clips were screencaptured using Camstudio so they're the same exact format as each other.
But I still have constant problems with videos not playing properly in preview. The last time I had this problem, they rendered that way too. When I hit the spacebar to view the video, it shows a bit of the video, then rewinds and plays the same section over and over, moving a little further forward each time. Basically "rubberbanding".
It's Premiere Pro CS 5.5.2
Win 7 64
No third party codecs.
I have plenty of hard drive space and 8 gb of ram. I do have browsers open which use a lot of memory, but all the other clips are working so that doesn't seem like it should be an issue.I'm not using any kinds of plugins or third-party things.
Shutting other memory hogging programs and restarting Premiere.Things that seem to hurt: using the time slider to increase or decrease speed of the video.