I have to make a couple of changes to a piece I edited 2 months ago on Premiere CC. When I open the file premiere lists out several clips that it says are missing. I've hit "locate" but nothing comes up.
View 3 RepliesI am using Premiere Pro CC, up to date, on Windows 7 Pro 64 bit. After week's vacation opened large project to find all clips offline. When I linked, they located fine but OK produce "the importer reported a generic error". I know the clips are on their hard drives and have not changed position. I am not sure of next step. I have always been able to link before though have not used "locate" dialogue box. Checking other projects reveals consistent problem with importer.
View 1 Replies View RelatedI've been working the last 6 months with 4 GH2s and ran into some strange troubles when initially importing them to the timeline. 2 hour shots are divided into 6 or 7 different files, and when brought into PP the first clips audio was assigned to all the other remaining clips. This was pretty strange, but I fixed it by using TSmuxer. It was added time in the workflow/set up, but in the end I could produce;
The latest update of PPCC now combines the entire 2 hours of footage into each of the 7 files being imported. So it is importing 2 hours of footage 7 times for each camera. The conforming is taking forever! For 4 cameras it's conforming 14 hours of footage each, when it should literally be a 7th of that.
It is taking up large amounts of time and disk space.
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
I often move files over to external drives to recover space. If I go to a project and get files missing, I then use locate to find the files but when I clcik on the located file I get a file not supported error though it is the same file.
View 5 Replies View Related Lightroom occasionally displays a dialog indicating it can't find the default catalog when starting, yet when I choose the default catalog in the dialog it opens as expected.
Lightroom v3.5 on OS X 10.6.8
Everytime I start CS5 Photoshop I receive an error that states - "The procedure entry point sqlite3_trace could not be located in the dynamic link library sqlite.dll".
I then get a message that Suitcase Fusion 4 is unable to start and auto font activation is turned off.I am using XP Pro SP3. how to reslove this issue.
I am using CS5 64bit and am unable to locate the airbrush tool. Where is it located assuming it exists in CS5?
View 4 Replies View RelatedI get the following message almost, but not every, time that I start Photoshop.
b This application has failed to start because vfzcore.dll was not found. Re-installing the application may fix this problem.
I have tried reinstalling Photoshop. But this does not help. I often also get a windows error after photoshop is closed saying that it did not shut down properly.
I suspect that the vfzcore.dll error is due to some 3rd party plug-in. But does anyone have any ideas? These error do not appear to affect the performance of photoshop that I can tell. Everything that I use works fine and it never bombs off (except after closing the program out). But having to hit "OK" at the error dialog every time the program starts up is annoying.
When I open Photoshop 7.0 this error pops up. "Photoshop.exe-Unable To Locate Component. This application has failed to start because M2000Twn.dll was not found. Re-installing the application may fix this problem." I have tried re-installing but get the same error.
View 3 Replies View RelatedI am trying to locate the brush folder on my computer. I am unable to locate any type of folders for gimp. I download gimp straight from the website.
I am trying to make s water mark and use it as a brush that is the reasoning locating the brush folder.
I have been getting an error message when trying to start Gimp. It says that libgmodule -2.0-0.dll is missing and that reinstalling Gimp might solve this problem. I have uninstalled then reinstalled Gimp two times and still keep getting this error and I'm not sure what is causing it to occur.
View 14 Replies View RelatedI downloaded the newest version of Paint.net and can't locate the color wheel. On the previous edition it was located on the bottom left corner of the page. Where do I find it?
View 4 Replies View RelatedDuring importing specifically "Moving" a selection of pictures from one location on internal drive to another location on internal drive, after I tagged the pictures with keywords, Lightroom crashed.
Now when I go to Previous import the pictures are not found. Neither are the files in the location I move them to. When I do a search for the images with the keywords I tagged those images with, I can't locate them. I don't see them in the Trash either.
Now, I have no idea where those images are. This is very bad. I guess I'll have to use Finder to move the images first then "Add" them to Lightroom afterwards. It's a good thing I was paying attention when I did the import.
Snow Leopard 10.6.8
I really want to be able to use the new Synchronize feature of PP (Clip > Synchronize), but I tried selecting two video clips (a video clip, and two audio tracks), and right-clicking, but the option to Synchronize is greyed out. If I select certain clips, then it appears, but I don't see what the pattern is. It seemingly picks random clips to not sync.
View 1 Replies View RelatedI've been working on a project that involves 45 separate clips. I have cut the unwanted stuff out of each clip - was a lot easier than I thought - just dragged the start and end point icons. So now I have 45 clips which just need joining together. When I shot all the footage and uploaded it to my computer the file I saved as Clip 1 may not be what I want to start the movie with. How do I go about shuffling the order of the clips and combining them all into one to form my movie - and when I join two clips together does Premiere Pro automatically join the sound.
View 1 Replies View Relatedaudio clips, usually less than 20 seconds, are now being cut off at the last few seconds of the clip. Can't figure out wny it is happening or how to correct it. If I select Edit, Play Original, I can hear the full clip.
View 1 Replies View RelatedI created an album, and then a slide show containing almost 200 slides. I was sure to save and name it; now I can't find it. When I open Photoshop Elements 9 there are no menu items,( i,e, File, View, Edit) across the top, so I see no way to "Open Saved Project". I can see the album listed on the right, and can access the original photos from there, but I can't find the slide show.
View 7 Replies View RelatedI cannot find it when I activate the spot removal tool in the develop module.
View 1 Replies View RelatedI am completing a 52-minute program, with 20 short sequences shot in ProRes 422 (50 Mbps) and saved to MXF OP1a files. The package looks good when output to Blu-Ray, but I will need to output for broadcast, and the broadcaster prefers MXF deliberables. My Question: Is there any significant loss of quality by saving 20 MXF files (with dozens of ProRes clips) to a final MXF container?
View 7 Replies View RelatedIt's listed as a feature numerous times in the forums but I haven't been able to export cut down stock footage as individual clips.
View 3 Replies View RelatedI have multiple sequences that use clips from an interview that show diagonal lines through them in the timeline. Not all files from the interview have these diagonal lines. These problematic clips do not contain audio or video when the playhead is on them. They don't even have a thumbnail pic in the sequence while other shots from the interview do. How I can get these to work in the timeline again?
View 8 Replies View RelatedI'm working on a Premiere Pro CC project with another editor. On his latest version, some of the clips on the timeline have a "+/-" or "+2" or "-2" on them. He's not sure how that happened, and I've not seen it before. What do those mean, and how do I get rid of them? I've tried Googling, but search engines don't respond well to "+/-".
View 1 Replies View Relatedafter razor cutting a clip (and doing other steps after it): is it possible to join the clip again?
Or is it the only way to delete the first or the second clip and strech the other? But this would be a little circuitous.
Add Edit don´t cut all the layers highlighted. When I insert or overwrite a clip into the timeline, the timeline don´t respect the highlighted layers (ex. if layer 1, 2 and 3 were highlighted and the clip were put in layer 1, clips on second and third layer should be deleted between in and out markers, but they aren´t.
The Ctrl+D and Ctrl+Shift+D commands (add transition) doesn´t work like the other versions too (respecting where the cursor is)the buttons to go to the next cut on timeline (in my keyboard, A and S) doesn´t work right too.I would like to know if these are bugs or the new Premiere CC is different from the others before.
I'm working on a doc and need to attach my transcript to the clips. Looks like I need to do it in the Adobe Script format.
Where I can get Adobe Script?
I'm a CC member and it's not in my CC Apps.
I have a synced three camera project that I have almost finished editing. I want to select the last video clip in my sequence and roll it back, while keeping the audio in place. The idea is to fade the picture to black while the synced audio continues as credits roll over black. However, I cannot find a way to select video only on the clips at the beginning and end of the sequence. I can select and separate any video clip in the middle of the sequence, but not the clips at the ends. I must be missing some keystroke. How do I do it?
I am noe to Premiere Pro and am using version CC.
Nothing happens when I try to move the clips to the timeline. Have Windows 8.1. Premiere Pro CC.
View 3 Replies View RelatedI have received a project edited on PPro 7.1.0 with a number of Canon C300 spanned clips. I have PPro 7.2.1. When I relink the clips the spanned clips link incorrectly. In fact all the span clips have incorrect timecode. The original editor on PPro 7.1.0 brought in the span clips as individual clips with sequential timecode. When I import the clips they come in as clips all of the same length but the time code is way off eg a clip that should start at 01:01:31:17 starts at 01:17:18:18. This is really less than satisfactory and the fact that we need to hand this project back and forth is really going to make life very difficult. Adobe and Canon need to sort this span clip thing out.
View 34 Replies View RelatedI need to modify a curtain wall mullion profile and a plumbing fixture for a model created by another firm. I see the family (e.g Rectangular Mullion) on the project browser window, but I cannot locate the actual rfa file.
For the the Plumbing fixture, I can click on the fixture, and select "edit family", but it saves a new family instead of telling me where the orginal rfa is located.
Obviously, since the model is from another firm, the rfa file is not located on the server where our firm typically stores family files. It's not on the C:// Program Data/ Autodesk/ RAC2011/ Imperial Library...
I am running a PC with Win7 & PPro CS6
I have a bunch of clips that were copied over from iMovie imports (no original files exist anymore)
They are all a special form of .mov
I can play them in VLC Media Player (but not Quicktime, or WMP) so I know that a pc can handle them...
When I import into CS6 I get an errorsaying Codec missing or unavailable...
Whered can I get the proper Codec?