I have been getting an error message when trying to start Gimp. It says that libgmodule -2.0-0.dll is missing and that reinstalling Gimp might solve this problem. I have uninstalled then reinstalled Gimp two times and still keep getting this error and I'm not sure what is causing it to occur.
View 14 RepliesWhen I open Photoshop 7.0 this error pops up. "Photoshop.exe-Unable To Locate Component. This application has failed to start because M2000Twn.dll was not found. Re-installing the application may fix this problem." I have tried re-installing but get the same error.
View 3 Replies View RelatedI get the following message almost, but not every, time that I start Photoshop.
b This application has failed to start because vfzcore.dll was not found. Re-installing the application may fix this problem.
I have tried reinstalling Photoshop. But this does not help. I often also get a windows error after photoshop is closed saying that it did not shut down properly.
I suspect that the vfzcore.dll error is due to some 3rd party plug-in. But does anyone have any ideas? These error do not appear to affect the performance of photoshop that I can tell. Everything that I use works fine and it never bombs off (except after closing the program out). But having to hit "OK" at the error dialog every time the program starts up is annoying.
I am trying to locate the brush folder on my computer. I am unable to locate any type of folders for gimp. I download gimp straight from the website.
I am trying to make s water mark and use it as a brush that is the reasoning locating the brush folder.
Lightroom occasionally displays a dialog indicating it can't find the default catalog when starting, yet when I choose the default catalog in the dialog it opens as expected.
Lightroom v3.5 on OS X 10.6.8
I have to make a couple of changes to a piece I edited 2 months ago on Premiere CC. When I open the file premiere lists out several clips that it says are missing. I've hit "locate" but nothing comes up.
View 3 Replies View RelatedEverytime I start CS5 Photoshop I receive an error that states - "The procedure entry point sqlite3_trace could not be located in the dynamic link library sqlite.dll".
I then get a message that Suitcase Fusion 4 is unable to start and auto font activation is turned off.I am using XP Pro SP3. how to reslove this issue.
I am using CS5 64bit and am unable to locate the airbrush tool. Where is it located assuming it exists in CS5?
View 4 Replies View RelatedI downloaded the newest version of Paint.net and can't locate the color wheel. On the previous edition it was located on the bottom left corner of the page. Where do I find it?
View 4 Replies View RelatedDuring importing specifically "Moving" a selection of pictures from one location on internal drive to another location on internal drive, after I tagged the pictures with keywords, Lightroom crashed.
Now when I go to Previous import the pictures are not found. Neither are the files in the location I move them to. When I do a search for the images with the keywords I tagged those images with, I can't locate them. I don't see them in the Trash either.
Now, I have no idea where those images are. This is very bad. I guess I'll have to use Finder to move the images first then "Add" them to Lightroom afterwards. It's a good thing I was paying attention when I did the import.
Snow Leopard 10.6.8
I've been using Gimp 2.6 for some months now and beginning to get to grips with it. I load photos into Picasa and then process jpegs with Gimp. Upgraded to 2.8.0 a few days ago and hit a problem.
Using the new 2.8 system to to 'export' out to a jpeg file, when I go back to Picasa and make any change at all, which then needs a 'save' I get a Windows error message: "Unable to save all files due to a disk error. The disk may be full or read only".Files not Gimp 2.8 processed are fine.
2.6 no problem - 2.8 problem. I don't think it will be Gimp bug, but there is an associated change which has 'upset' my computer.
I created an album, and then a slide show containing almost 200 slides. I was sure to save and name it; now I can't find it. When I open Photoshop Elements 9 there are no menu items,( i,e, File, View, Edit) across the top, so I see no way to "Open Saved Project". I can see the album listed on the right, and can access the original photos from there, but I can't find the slide show.
View 7 Replies View RelatedI cannot find it when I activate the spot removal tool in the develop module.
View 1 Replies View RelatedI am unable to save an image as a jpg file!!! every time I try, I get the following error: "Not A Regular File"
I can save as png, but not jpg!!! the original format was psd, that error message came up when saving as jpg... when I saved as png, I closed Gimp and reopened the png file, but I STILL get that error message when saving as jpg!!
I need to modify a curtain wall mullion profile and a plumbing fixture for a model created by another firm. I see the family (e.g Rectangular Mullion) on the project browser window, but I cannot locate the actual rfa file.
For the the Plumbing fixture, I can click on the fixture, and select "edit family", but it saves a new family instead of telling me where the orginal rfa is located.
Obviously, since the model is from another firm, the rfa file is not located on the server where our firm typically stores family files. It's not on the C:// Program Data/ Autodesk/ RAC2011/ Imperial Library...
I often move files over to external drives to recover space. If I go to a project and get files missing, I then use locate to find the files but when I clcik on the located file I get a file not supported error though it is the same file.
View 5 Replies View RelatedI'm using Lion, and to install the Leopard version of GIMP. I'm getting an error message, and don't know what action to take:
Unable to open a test swap file.
To avoid data loss, please check the location and permissions of the swap directory defined in your Preferences (currently "/Users/myname/Library/Application Support/Gimp").
I am unable to locate the artistic filter called "poster edges". According to the online info on PSE 10, I should be able to find "poster edges" by going to editor, effects, filters, artistic and under artistic the POSTER EDGES should be there. All are there EXCEPT poster edges.
View 6 Replies View RelatedI have Lightroom 3 and just this morning noticed that all of the preloaded lens profiles are missing. I've been using the program for 3 years now and they've always been there previously. The only one available is SIGMA. I have a Canon, so all of those are gone. At the bottom of the box in "Develop" it says "Unable to locate a matching profile automatically."
I am running on Windows and tried repairing, but it seems to be missing the installation file that it needs.Is there a way to download and install the profiles for just the lenses I have? Or, do I need to completely re-install? If that's the case, will all of my libraries stay in tact?
I'm running Photoshop Elements 5.0. Everything was working fine til this mornin. I've had the program for about a year now. When I tried to open it this morning I got this error message that popped up.
It says:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
I've tried repairing the program. That didn't work. Restarted my computer. That didn't work. Uninstalled the program and tried opening it again. That didn't work. I'm at a loss! I really need to get into my program b/c my work is there. I tried opening some of my files (they are located in my Pictures folder) and they pop up with the same message.
now a have a typical error to insert in my assambly a item from my content center, reciveing a erro like "unable to create component", i´m looking for a solution inside forums and find a solution but didn´t work for me, the solution watched and did for me as deleted of the content folder "CACHE" in my computer C:/....all users/inventor..../cache.
I use AI2009 with SP1.
What can i do, delete all families from content center and upload again?
I am attempting to modify a component that I already have. Part of the modifications I am attempting to do involves mirroring some of the part's features. However, when attempting to mirror the component I receive the error message attached to this post: "Select set contains object that cannot be patterned". I have been fooling around with this part and a few others and this appears to be an error message that comes up for mirroring or patterning (circular/rectangular) complex shaped parts. What specifically is the issue here and how can I bypass this error message?
View 8 Replies View RelatedToday, all of a sudden, my coworkers and I cannot place standard parts from our content center (there are only three of us). We are not using Vault - but we have set up our Content Center to access a network location:
N:StandardsInventorContent Center FilesLibraries
This has worked for months ever since we set it up. Problems just started today for all of us. Parts that DO work are parts that you have to tell it an extruded length (like structural steel or tube/pipe). Nothing else will work (fasteners, pipe fittings, shaft collars, etc).
Interestingly, if I select to insert the part "as custom" instead of "as standard", all parts work like they should.
For the parts that do not work, I can navigate through all of the menus to select parts, but instead of getting the "Save As" dialogue, I get the "Unable to create component" error message.
I am using Windows 7 64bit and Inventor 2012 SP1 (Build 190). When placing a new content center item an error message of "Unable to place component" is reported. Content center was working previously.
I determined the problem resulted in using a custom Date format in the Windows Region and Language setting. To duplicate go to Control Panel -> Region and Language ->Formats Tab -> Additional settings button -> Date tab and change the Short date format to a custom format (I was using ddd M/dd).
To fix simply reset to a standard date format.
Note that this can be done whilst Inventor is running and I have have submitted a bug report. None of the standard date formats resulted in errors. I have tested "ddd-dd/M", "ddd/MMM/yyyy", "yyyy/MM/dddd", and "yyyy-MM-ddd" and all resulted in an error. "yyyy-MM-dd" did not result in any error.
Cannot delete label style component. This is for line annotation labels.
I created a child BRG-ONLY from a BRG-DIST and it will not allow me to delete the distance component. The red X is faded and not clickable.
This is my second day with a new company, and when somebody else created a similar child style apparently they could not either. The just made the distance component invisible... which I guess works almost as well.
How would I be able to pick a specific component to make sure I can delete it?
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I am trying to switch component rows within my assembly file but can't seem to do so. All of the files are generated, yet and still I am not able to change component rows based on user parameters. Files are attached.
My code is as follow in Ilogic
MultiValue.Setlist("Material", "1", "2")
If Material = "2"
iPart.ChangeRow("RING", "RING-03:1")
End If
I was in the process of moving a folder inside or LR. I might have clicked and moved it twice since it was very slow. LR wasn't able to complete the move and gave me an error message. After I clicked "OK" on the error message, I wasn't able to find my folder/images from the old or new location. I did a spotlight search on my mac, but I wasn't able to find them anywhere. Where has my folder/images gone? I tried to locate them without any success.
View 2 Replies View Relatedi just recently migrated all the info on one macbook to my new macbook. everything works fine except that when i try to open a file in CS4. a message pops up saying "missing component - fatal error".uninstalling & reinstalling doesn't seem to fix it & so i am at loss as what to do. my lightroom 4 works just fine.
View 1 Replies View RelatedI am tryng to upgrade from LT 2009 to LT 2012 and recieve this message "annot update some system component now. Please reboot the machine and try again" We are running Windows Professional XP 2002 with SP3.
View 3 Replies View RelatedThis is my first message/post here and it's a problem I'm afraid...
CS3 is really giving me some challenges here. When I try to open a JPG from Bridge or from within Photoshop I get the following;
Fatal Error - Missing Component
/Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.0.0/VersionCue.framework
Can anyone help me with this?
I try to open a JPG from Bridge or from within Photoshop I get the following;
Fatal Error - Missing Component
/Library/Application Support/Adobe/Adobe Version Cue CS3/Client/3.0.0/VersionCue.framework