VideoStudio :: Rendered Movie Stutters / Is Not Smooth
Jul 19, 2012
I bought the new Olympus TG-1 camera, and want to edit movies that I shoot so I downloaded trial of latest Video Studio Pro X5 to try it out. But I'm not satisfied with the quality of the rendered file. The result is not smooth. For example, I shot a short movie clip out of the window of a slow moving train. When I play the original file everything is nice and smooth, but when I import the file to Video Studio and render it (without doing anything to it, no effects or anything) the result is a stuttering movie - kind of like some frames are missing, or maybe duplicated... (Sound is just as it should, no problem there.)
Source file is .MOV (quick time) 24bits 1920x1080, 29.970 frames/sec according to file properties in Video Studio. Using GSpot i get the following: codec avc1, name H.264, 19641 kbps, 29.971 frames/sec
I've tried every format under "create video file" in Video Studio but the result is the same every time no matter what I do, although the option "Same as first video clip" is not available (it's dimmed when using clip shot with this camera). My system is PAL and I know that 29.97 fps is not PAL standard, but I also tried rendering custom format where the result was a 720x576 clip with 29.971fps (but kpbs is only 1024) but still the same stuttering movie.
View 3 Replies
ADVERTISEMENT
Sep 20, 2011
I just bought Video Studio Pro x4
Now I am trying to render a clip which is mpeg 2 format to wmv, it does that no problem, but on the play back it seems to sutter a lot,
no i need to decrease the frame rate or what?
View 1 Replies
View Related
Apr 10, 2012
I just installed VideoStudio Pro x5. After creating a few clips, I go to play the project and the preview video image studders, and plays a clip here and there, but my music plays smooth.
I have all the hardware acceleration box's checked ( there's 3 of them ). I don't know what to do, I read this is the least demanding video editing program. I also meed the minimum system requirements?
View 7 Replies
View Related
May 29, 2011
I have always rendered my projects to DVD (mpeg) video files and then used those to 'create disk' (ie create movie).
I also thought that to prevent 'create' disk' from rendering again that all the attributes (constant or variable, kbs, audio compression) used during rendering must be the same as when creating disk.
Is there any benefit from creating a movie (for burning) using either method? Is it faster overall 'creating disk' using project files than rendering first? The reason I ask is that today it seemed to take 'forever' to 'create disk' using pre-rendered files.
I realise that you always see the warning that 'this action will take some time to render' but I thought that if all the attributes were the same that no rendering was done.
View 14 Replies
View Related
Jan 21, 2013
I'm using a new iMac and Pegasus R6. If I put 1080 ProRes footage on the timeline it plays fine with the unrendered resize on it. Resize is only changing bit depth. The minute I render the clip, it will no longer play without dropping so many frames that it is unusable.
View 3 Replies
View Related
Sep 5, 2013
Usinf 3ds Max 2014 x64, I have seleceted an OUTPUT size of w1920, h1080. the finished movie comes out w720, h480.
View 9 Replies
View Related
Apr 9, 2012
I have tried everything (almost) to try and align the working area to the rendered movie.
(Area around triangle watch for align shift) This is what it looks like in workspace:
This is after rendered inside movie same frame:
As you can see they are not the same. The same thing happens in viewport background too, and not just in environmental background.
how to fix and get pre render and post render match perfectly?
The movie I'm using for environmental map is in 1080p.
View 2 Replies
View Related
Sep 25, 2011
A problem with recording narration has just started with my Pro X4. On playback the recording is not complete and the nearest description is that it is stuttering. I have tried recording several different phrases in different parts of the video and using two different mics but each time get this stuttering.
View 2 Replies
View Related
Aug 28, 2013
When I play video clips back in the playback window, they shake and stutter and give an "after-effect" look to each clip. Looks like mouse trails if you select that in your setup. I am running the program in Windows 8 64 bit, if that matters, but don 't see why it should. When I play the clips in Windows Media player, just to check to see if it is the clips, none of this behavior occurs. Never ran into this one before and I have been with VS since the good old days of version 4.
I rendered a few clips that were doing that into the final MPG format I want and the shakiness is not there once rendered. It can only mean that I have something ticked or un-ticked in my setup of VS Pro 16 Ultimate. It makes it difficult to stitch together the final clips with pinpoint accuracy.
View 14 Replies
View Related
Feb 6, 2010
I just installed VS X3 and I'm very impressed with the improved AVCHD editing capabilities. Unfortunately, I'm having a problem with the output. When I import a single AVCHD 1920 clip from my Canon HF100 to my VS X3 project, perform a simple trimming operation, and then save back to the same format as the original clip (no re-rendering), the output file is virtually unplayable. It will usually start playing okay, but after 5-10 seconds start stuttering and even stop playing altogether for 10-15 seconds at a time. I've tried several different players. This problem affects ONLY the output from VS X3. The original footage in the same format plays just fine in any player.
I reverted back to VS X2, tried the same operation with the same clip, and the output is just fine. This must not be a widespread problem, because I searched the forum briefly and couldn't find similar reports. I can continue using VS X2 for the time being, but I really wish I could take advantage of the editing improvements in X3.
View 14 Replies
View Related
Aug 26, 2011
Brand spankin' new user to X4. I'm working on a fairly simple slideshow that starts with a 15 second MOV file, followed by 10 pictures at 3 second intervals along with some background music. The issue I'm having is that when I go to generate a WMV file (or any format), X4 renders multiple times and spits out multiple files.
I'm sure there's a setting somewhere that I haven't set properly...
View 5 Replies
View Related
Apr 26, 2013
I must have turn off a switch somewhere, after rendering a project I found the music track is not included. I can hear the music track in edit and preview. But after render the project, the audio attached with the video is ok except no music.
View 1 Replies
View Related
Aug 29, 2012
New Vs pro x4 user here.
I would like to save my movies as WMV files at a size of 640x480 . I found a template in the movie templates manager that has the size , however try as I might I cannot get to save the file at around 500mb's . it keeps saving the file at around 120 mbs how to adjust the save file size
View 6 Replies
View Related
Aug 11, 2011
When my project is rendered... and put on a DVD, is it possible to later change its narration to another language? I ask since I notice that, once rendered, the music, video and narration tracks become one. Is there a way of later separating them, say for changing the language of narration for viewing in another country?
View 14 Replies
View Related
Jun 7, 2013
basically my 24fps footage isn't rendering smoothly ON X5 Ultimate.
[URL]
What i've done is put the same clip together twice, as strangely the first clip is smooth, then subsequent clips are all jerky. This has been going on for some time, so switched to 25fps. 25fps from my Canon 5D MKII wasn't as good as 24fps, so switched back and decided to try and sort this out.
I have been through multiple settings, deleted all older versions of Corel, removed then re-installed X5, made sure all patches and updates were installed - made no difference.
View 14 Replies
View Related
Nov 15, 2012
Using X5, I've been assembling video clips taken on holidays into small, specific topic mini-movies (say about 2-3 mins long each) for friends and family, and I've noticed an odd effect of rendering using the MPEG optimiser option when creating a video file from a set of project parts.
All the source clips have a 16.9 aspect ratio. The project file has full, trimmed, and cut clips, plus text, voice over and music.
Put together in a project file, the various clips fill the small or large display windows, as one would expect. Trimmed and cut clips made not difference to the display when playing. But the rendered result of that project file shows irregular "jumping" of the image aspect ratio: sometimes, it's the full display window, at other times it looks like the image is full width but there are black bars top and bottom, and still other times the reverse - bars on the side with a full vertical image.
Those latter characteristics are symptomatic of a 4:3 image converted to 16:9, and I promptly checked to make sure the sources were all 16:9, and they were. The jumping seems to happen within rendered clips and when a clip transitions from one to the next, but not every time. When it happens within a clip, the display 'flickers" as the aspect ratio changes and its that flicker that originally drew my attention to what seemed to be happening.
View 2 Replies
View Related
Jun 28, 2011
I'm using Ulead VS 11. When I make a clip and render it as new video, the new video is repeating frames all over the place. As it renders I can see it happening. It's like the video renders minute/second 1:01, then jumps back to 1:00, then re-renders 1:01. All over the place. These repeat frames are not in the original video.
The format of the original video is MPEG2, 8000 bps, and is being converted to WMV (don't ask!). I have found that the only way to retain any semblance of quality in the new video is to change it to WMV, and for my purposes, this is adequate. I have tried about 10 of the different output formats offered in the "Create Video" option, including saving with settings the same as project settings, and the result is the same, with the exception that the WMV 720 is the only one where a decent quality is maintained. That's a whole other question -- why rendering with "same as project settings" gives me total junk.
Is there some other setting that could be causing these frame repeats? I don't believe I had these problems when the original video was WMV rendering to WMV. But MPEG2 to MPEG2 is not fixing it either, so there must be something else.
View 8 Replies
View Related
May 20, 2011
I have noticed this in a couple of videos I've done now, I put together some aerial footage I have done, and after I render it there is a low click-thump sound, almost like a slow heart beat. This is not in an added audio track, and it does not do this in the preview.
I am uploading a clip to youtube as I write this, (will update when done) where I left the native audio in place the whole time (rather than add a music track) so it can be heard.
The raw files are MP4 files from a GoPro HD Hero camera.
ps. in this video, you can hear the sound I am talking about, but only until I fade it out and start the music track
View 11 Replies
View Related
Sep 16, 2010
I am having trouble with the clarity of some photos being used in a project. The project has a mixture of both photos and video. The photos are inserted into the overlay tracks in the time line and some have a mask applied to them.
Some photos both with and without mask's appear pixelated both on the time line and when rendered.The file format for the photos are Jpeg and range from 1.85MB to 60MB in size and have no pixelation. In preferences i have in the image section both "anti-flickering" and "Cache image" checked. I have also tried the photos in the first time line and still are not clear.
View 5 Replies
View Related
May 5, 2012
Is it normal for video to be sharper during the CIRCLE transition and then return to the 'normal' sharpness at completion of the transition.
I have just rendered a project which contains quite a few transitions including Crossfade, Side, Spin, Face and Circle. Every time I have used the Circle transition the image 'inside' the 'circle' appears sharper until the 'circle' fills the screen (i.e. the end of the transition) when the image appears 'normal'.
I think that there is something wrong with CIRCLE transition as I have also noticed that it does not display correctly (preview window goes black) when you 'drag' the scrubber along the timeline.
View 8 Replies
View Related
Jun 5, 2012
I just rendered a video slide show that liberally uses pan and scan zooming for every photo and it looks like garbage. It's jumpy and jerky with almost every pan and scan. I used the highest mpeg conversion quality but didn't mess with much else. Is there something I can do to make it not do that? It seems like it gives you the option to use a different mpeg rendering engine if you want...
What a drag. It took me 2 weeks to put this thing together and the final version looks like crap.
View 2 Replies
View Related
Apr 13, 2013
I have Canon 60d original footage shot at 1080p 25. The clip is only 9-1/2 sec long. When I play the clip straight out of my pc folder inside VLC the clip is smooth. The moment I import the clip into VS proX5 timeline and straight away, share / create video file / AVCHD / 1920x1080p preset, VS introduces 4 dreaded stutter problems into the render finished product which is very noticeable and ugly to watch.. I am in PAL land and VS was installed to PAL. I have also tried the WMV hd1080p preset and mpeg-4 and the results where just as disappointing.
View 10 Replies
View Related
Oct 26, 2011
I want to re-edit -remove some parts, adding a title- a fullhd VSX3 rendered file which looks and plays perfect. I never have problems with VSX2/3 even when re-editing. This time, it first takes seconds before it opens in the preview window when I click the library tumbnail. It freezes (with created or without smart proxi) for several seconds when I try to cut, or whatever on the timeline.
It only gets somewhat better when de-selecting "audio while scrubbing", but remains still much more "freezy" than all my other (rendered) files. It's a ~2.5 Gb AVCHD file rendered at 18Mb/s VBR in VS. The only thing what is different is that it contains (pre-converted to AVXHD) SD parts from a JVC camcorder (.mod), but it all plays back flawlesly in several HW and SW players.
View 3 Replies
View Related
Oct 3, 2012
I’m using VS Fx4 and I am having a problem I have not experienced before. The audio in my Music Track has an annoying “pop” occurring. The pop does not occur when viewing the project (.VSP), only after it has been shared/rendered.
At first I thought that perhaps the poor quality was due to running other processes while the video rendered or something to do with the video format being used, however rendering the videos after hours and switching video formats (.wmv & .mpeg4) have not worked. You can view one of the videos I’m having an issue with here: [URL] ... The audio pop is noticeable in the first few seconds of the video.
I have two video files that are currently having this problem, both have Music Tracks.
View 3 Replies
View Related
Nov 28, 2013
How I can add intro movie before menu. I'm using VS Pro X6.
View 2 Replies
View Related
Apr 16, 2012
In VideoStudio Pro 4, I was able to modify the proportions of my movie : stretched it or squeeze it, in or out of proportion. I can't seem to do this in Video Studio Pro 5. A strategic admittance to promote the next "Hyper Super Ultimate" 6th version 6 ?
View 6 Replies
View Related
Dec 12, 2011
At the EDIT step, the voice level of each HD clip is in reasonable level, but during playback of the entire project the voice level droped down. Also after rendering the voice level is still low. On the other side, the voice level of imported music from audio CD doesn't changed. Is it suppose to be so? I am using the Pro X4 program.
View 8 Replies
View Related
Dec 16, 2013
I have a sequence of still jpgs I rendered out of Maya. There are 90 total. I want to throw them into the editor at 30fps and have them be in order. I have tried simply copying them all and dragging them all at once onto the timeline but that leave each image at 3-4 seconds per image and they are not in order.
I know there is other software I could use to do this but since I'll be editing the video in Video Studio I thought it would be nice to be able to do this inside of it. Is this possible with Video Studio?
View 2 Replies
View Related
Jun 14, 2011
I made a new template for creating a 30Mb/s "one keyframe/frame" MOV output content which worked well when set via custom settings. When I wanted to use my template in the "create video file" prompt, my VSX3 "needed to stop" ...and I was asked to send the .DMP file to Corel tech support. VS restarted OK, but once I selected "create video file", same story: stop.
Trying to delete form the movie template manager, same story: stop. Changing the settings to lower performance MOV in the temlate manager worked, but still same result when trying"create video file". Couldn't wait for the Corel support. Full reinstall solved the problem.
View 3 Replies
View Related
Oct 6, 2010
I'm trying to remove a watermark in an old movie made of my son in high school (about 8 yrs old), by a friend of his. It's right in the middle of the screen in bright red. They didn't care about it back then as it allowed them to format their movie online. Before I put this very short clip in my memorial video I want to clear that out. Don't know what original software was used. My son's friend can't remember either. Does Videostudio have a way to fix this?
View 2 Replies
View Related
Oct 11, 2010
Where is Get more link for Movie Factory 7 SE?
I think that I have to re-install this, as I don't think it is properly installed
View 6 Replies
View Related
