VideoStudio :: Video Shaky And Stutters In Playback Window
Aug 28, 2013
When I play video clips back in the playback window, they shake and stutter and give an "after-effect" look to each clip. Looks like mouse trails if you select that in your setup. I am running the program in Windows 8 64 bit, if that matters, but don 't see why it should. When I play the clips in Windows Media player, just to check to see if it is the clips, none of this behavior occurs. Never ran into this one before and I have been with VS since the good old days of version 4.
I rendered a few clips that were doing that into the final MPG format I want and the shakiness is not there once rendered. It can only mean that I have something ticked or un-ticked in my setup of VS Pro 16 Ultimate. It makes it difficult to stitch together the final clips with pinpoint accuracy.
View 14 Replies
ADVERTISEMENT
Dec 20, 2013
When capturing HDV clip with Premier Pro CC and playing it in the timeline, the video stutters. I play the same captured clip in Windows Media Player, and it look great. I am using Adobe Premiere Pro CC.-Version 7.2.1(4)
I have the following equipment:
Camera
Canon XH-A1S (set to HDV 60i)
Processor:
Intel® Core™ i7-4930K CPU @ 3.40GHz
Memory:
32 GB
System Type:
64-bit Operating System
Rating:
7.8 Windows Experience Index
Graphics Card
GeForce GTX 760
Solid State Drive
Samsung SSD 840 EVO 750G SCSI Disk Device
Resolution
1920x1200, 59Hz
BD-RW
Pioneer BDR-208D ATA Device
Monitor
Dell U2412M
Clip properties:
Type: MPEG Movie
File Size: 1.1 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;06;04;06
Pixel Aspect Ratio: 1.3333
View 25 Replies
View Related
Sep 20, 2011
I just bought Video Studio Pro x4
Now I am trying to render a clip which is mpeg 2 format to wmv, it does that no problem, but on the play back it seems to sutter a lot,
no i need to decrease the frame rate or what?
View 1 Replies
View Related
Jan 5, 2013
I have a new camera which records in AVCHD format. I have transferred the video files from my camera to the computer. I have compiled a project on Video Studio ProX2. When I playback each clip they play at normal speed. When I playback the project before copying onto a disc the playback is very fast. I have also got as far as sharing the project onto a disc but when I click on preview the playback is again very fast. I see that I can slow down the playback but this also slows down any speech on the video.
I have used Video studio PRox for a couple of years now with great success with an old Sony Handycam but I must need to do something to the new format to play it back at normal speed.
View 9 Replies
View Related
Nov 29, 2012
All the videos I've produced with VS Pro X5 have a tendency to "loop" back to the beginning and replay...
how to prevent that?
View 4 Replies
View Related
Jun 20, 2011
I just finished editing MP4 videos with Corel VideoStudio x3. I exported the videos in the same format. The problem i am having with all of the videos is that when I try to view them with Adobe Flash Player All I get is the audio portion of the video and the Adobe controller is visible. I have tried to exporting the videos in a few different MP4 formats but none seem to work?
View 5 Replies
View Related
Apr 30, 2011
I have used on and off MovieFactory for a number of years and have been well pleased. It's simple to use and doesn't require a degree in software use to make effective DVD's playable in all DVD players.I shoot my footage with a Panasonic NV-MX300 3 CCD camcorder, which although a few years old now, can hold it's own with lower end so called HD Camcorders
My method of creating a DVD has been to capture the footage using a third-party Video editor and then importing it's export into Movie Factory and then work from there.
I have recently upgraded my version of MovieFactory 6 Plus to VideoStudio Pro X4 as this seems to better support the creation of HD BluRay discs. No I don't have the Power Pack Plug-in with my version of MovieFactory but thought that upgrading would better suit my needs.I have created, successfully a 35Gb .AVI file using my third-party NLE and it's properties are as follows: -
Stream 0
Type: Video
Codec: DV Video (dvsd)
Resolution: 720x576
Frame rate: 25
Stream 1
Type: Audio
Codec: PCM S16 LE (araw)
Channels: Stereo
Sample rate: 48000 Hz
Bits per sample: 16
My original DV footage was roughly this too. It was shot in Widescreen although the sound was recorded in 32000 Hz stereo. When I import the video into either MF 6 or VS Pro 4 the playback is in a squashed 4:3 aspect Ratio and no matter how I alter the preferences or Project Settings, before or after importing the .AVI file, it refuses to play back in widescreen.When the exported file plays in VLC Player or Windows Media Player, it plays back correctly.
View 14 Replies
View Related
Nov 24, 2010
Downloaded and installed the latest VS X3 trial version 13.6.2.42. Direct X is installed on the PC.
There is a problem when I try to play in VS X3 any MPEG2 file created with the earlier version of VS 7SE. The video playback is too fast and I hear only an intermittent high pitch noise. There is no problem playing the same file with the Windows Media Player.
I can play without problem .avi file captured from a DV camcorder. The VS X3 sample files play fine as well.
View 9 Replies
View Related
May 4, 2011
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
The manufacturer of the flip camera is suggesting that since the footage can play fine with the camera program (Arcsoft Media Impression) the problem seems to be related to the player codec on my computer. They suggested that I download the latest K-Lite Codec Pack to see if that would resolve the problem.
View 2 Replies
View Related
Apr 24, 2011
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
View 14 Replies
View Related
Jan 21, 2013
I'm using a new iMac and Pegasus R6. If I put 1080 ProRes footage on the timeline it plays fine with the unrendered resize on it. Resize is only changing bit depth. The minute I render the clip, it will no longer play without dropping so many frames that it is unusable.
View 3 Replies
View Related
Sep 25, 2011
A problem with recording narration has just started with my Pro X4. On playback the recording is not complete and the nearest description is that it is stuttering. I have tried recording several different phrases in different parts of the video and using two different mics but each time get this stuttering.
View 2 Replies
View Related
Jul 19, 2012
I bought the new Olympus TG-1 camera, and want to edit movies that I shoot so I downloaded trial of latest Video Studio Pro X5 to try it out. But I'm not satisfied with the quality of the rendered file. The result is not smooth. For example, I shot a short movie clip out of the window of a slow moving train. When I play the original file everything is nice and smooth, but when I import the file to Video Studio and render it (without doing anything to it, no effects or anything) the result is a stuttering movie - kind of like some frames are missing, or maybe duplicated... (Sound is just as it should, no problem there.)
Source file is .MOV (quick time) 24bits 1920x1080, 29.970 frames/sec according to file properties in Video Studio. Using GSpot i get the following: codec avc1, name H.264, 19641 kbps, 29.971 frames/sec
I've tried every format under "create video file" in Video Studio but the result is the same every time no matter what I do, although the option "Same as first video clip" is not available (it's dimmed when using clip shot with this camera). My system is PAL and I know that 29.97 fps is not PAL standard, but I also tried rendering custom format where the result was a 720x576 clip with 29.971fps (but kpbs is only 1024) but still the same stuttering movie.
View 3 Replies
View Related
Apr 10, 2012
I just installed VideoStudio Pro x5. After creating a few clips, I go to play the project and the preview video image studders, and plays a clip here and there, but my music plays smooth.
I have all the hardware acceleration box's checked ( there's 3 of them ). I don't know what to do, I read this is the least demanding video editing program. I also meed the minimum system requirements?
View 7 Replies
View Related
Feb 6, 2010
I just installed VS X3 and I'm very impressed with the improved AVCHD editing capabilities. Unfortunately, I'm having a problem with the output. When I import a single AVCHD 1920 clip from my Canon HF100 to my VS X3 project, perform a simple trimming operation, and then save back to the same format as the original clip (no re-rendering), the output file is virtually unplayable. It will usually start playing okay, but after 5-10 seconds start stuttering and even stop playing altogether for 10-15 seconds at a time. I've tried several different players. This problem affects ONLY the output from VS X3. The original footage in the same format plays just fine in any player.
I reverted back to VS X2, tried the same operation with the same clip, and the output is just fine. This must not be a widespread problem, because I searched the forum briefly and couldn't find similar reports. I can continue using VS X2 for the time being, but I really wish I could take advantage of the editing improvements in X3.
View 14 Replies
View Related
Jan 30, 2013
I recently got a new pc, installed X3 and transferred my project files and relinked my clips for the current project i'm working on but when I went to preview my work it does not display the video instead just shows a green screen. It does this in both the timeline and the preview window.
View 6 Replies
View Related
Dec 2, 2011
Firstly note I am using Videostudio Pro X4.
I have noticed many times that when I add the CIRCLE transition between two video clips that when I drag the 'scrubber' along through the two clips and transition, when the scrubber goes past/through the circle transition the preview window goes blank (displays black).
If I change the CIRCLE to any other transition it displays (the transition) correctly but as soon as I put the CIRCLE back it once again only shows BLACK.
If I PLAY the project the CIRCLE transition displays correctly - it is only when dragging the scrubber that the problem exists.
Is there a known problem with the CIRCLE transition?
View 4 Replies
View Related
Jul 18, 2013
I'm using Corel videostudio X6 and I have 2 problems.
1. when i go in to track/customize motion mode, the window is bigger than the screen so i can't use this option (i'm using lap top wide screen). like in here: [URL] ....
2. when i'm adding a text to low quality video the text doesn't look well and i wonder how can i maintain the quality of the text?
View 1 Replies
View Related
Jan 4, 2013
I just downloaded the trial version CS6. I imported into Photoshop, Pro Res 422 HQ clips and it plays back very choppy. When exported it remains choppy.
View 4 Replies
View Related
Mar 8, 2014
After rendering a few clips in my timeline for playback, my video tracks are no longer playing back. The timeline time marker plays, the time counts, and the audio playback is working correctly, but the video stays on the frame in which playback started, and does not move change until pausing playback.
View 2 Replies
View Related
Apr 1, 2014
I was watching through footage and choose a handful of clips ... my video worked fine. Then Friday I came back to start putting everything together and the clips "went blank," The audio could be heard and played back in real time, but the video displays as a black screen or a green screen. I tried rendering, but it said it would take 2+ hours to render the 1 minute of clips I had in my timeline. Even the sections that did end up rendering just showed a blank red screen. Clips are .MTS (which I've used in every project previously with no problem) shot with a Panaconic HMC-150.
I'm using Adobe Premiere Pro CS6 on Windows 8, 64-bit operating system
Processor: Intel Core i7 CPU - 920 @ 2.67 GHz
12.0 GB of RAM
The thing that gets me is that this has worked for months, even worked with these clips a few days ago, and now it seems like everything just vanished.
View 2 Replies
View Related
Jan 7, 2013
In CS6, When editing Pro Res 422, Video with single layer plays back fine but with 3 layers playback and export are very choppy. I tried merging layers but the video doesn't playback at all. Is there any other settings I could try?
CS6 memory usage is 100%, sound is turned of in TL. System MacPro -Quad Core Intel Xeon-Processor Speed 3 GHz, Memory 8GB.
View 6 Replies
View Related
Mar 26, 2012
I have the error, that the animation preview can't start my media player...
I allways get two errors: One from windows (the german one) and one from max...
My default media player is "media player classic home cinema". If i click on a AVI file in explorer, mpchc will launch and play it. So the file associate are ok. But max can't start it.
This is not related to max 2012... I have this error since many versions of max...
[URL]
View 2 Replies
View Related
Jan 10, 2012
And so does the export. I'm on a Mac.
Premiere is fine, but not Lightroom.
View 1 Replies
View Related
Sep 20, 2013
LR5.0/5.2 64-bit Win 7--
I am occasionally getting an error message when trying to view .MOV files from a Nikon D600: Video System Error: unknown Message: BindSuccess. Once that error pops up, I cannpt view any movies until I restart Lightroom. However, I do not have any problems viewing any of the files with Windows Media Player. What is causing this? I have an AMD Radeon 6700 HD series video card and a lot of RAM.
View 2 Replies
View Related
Oct 26, 2013
I've created a slide show using layers and have created a video group. This turns the layers into clips in the timeline. I've added a cross-fade transition between each clip in the timeline.
Everything plays back nicely in PS. When I export to mp4 and play it back in Quicktime, no matter what the magnification, the transitions look horrible. Even if I freeze frame on one it's horribly pixelated. I've tried different export options with the same results. Something appears to be happening during rendering the transitions, as if PS doesn't know how to create them. I export to:
Adobe Media Encoder
H.264
High Quality
1920 x 1080 (same as my file)
Frame Rate 30 fps
Field Order: Preset (Progressive)
Range = All Frames
My stats are:
PS CS6
iMac 27"
10.6.8
800 gigs free space
12 gigs ram 8 free
View 2 Replies
View Related
Jun 29, 2012
I am trying to record a video of a driven constraint. It seems to work fine until I go to view the video file. When I open the file the windows media player opens but no video plays. It acts as if the video is a ~ milli second long.
I have tried to save the file in both formats: .wmv and .avi. Both do the same thing.
View 2 Replies
View Related
Sep 25, 2012
I have blended still photos, imported video AVI with it's own audio and music tracks. The work area was rendered and when I play the sections the music blends out and the video plays back as it's supposed to and even with full screen. Then I use the "Share" tab and burn a DVD using either a DVD-R or DVD+R and everything is fine except the video pieces that I want to play are silent.
View 2 Replies
View Related
Feb 12, 2014
I'm running elements 11 (on windows 8 pro), and I noticed when I click on a video, (the thumbnail is there in organiser), and hit "play" all I get is grey screen, the timeline runs fine, theres sound, just no image.
View 4 Replies
View Related
Sep 20, 2013
jdi1: Why is there still no video playback in full screen mode?
jdi2: Please give us an option to start video playback automatically when browsing through files in loupe and fullscreen mode (without having to press "space" or such). Let us switch this option on or off just as needed.
Video playback is still a bit laggy. Often LR5.2 needs to load audio first while the video already starts playing. If other (even freeware) media browsers can do this without latency, why not Adobe's LR?
View 1 Replies
View Related
Aug 5, 2012
After I've upgraded to OSX 10.8 Mountain Lion, I begin to see the following issue while trying to import .mts files from my Panasonic GH2 SD cards:
1. LR no longer sees individual files on the SD card. I know that this is because ML has decided to treat all AVCHD-related directories as packages and LR can no longer see the indivisual .mts files from the file system. However, Premier Pro CS6 CAN.
2. Even after copying the .mts files to an unrelated directory, LR is no longer able to import the files. I get the "There is a problem with the video file"
3. The .mts files I previously imported into LR 4.1 with Lion no longer plays inside LR. I see the thumbnail but if I attempt playback I get the "there was an error working with the video" error.
There obviously major compatibility issue with LR 4 and ML in relation to video files. I relies on LR for all my video file cataloging needs - now I am unable to do so. All of this was working just fine with Lion.
View 1 Replies
View Related
