VideoStudio :: Widescreen Video File Refuses To Playback In 16:9
Apr 30, 2011
I have used on and off MovieFactory for a number of years and have been well pleased. It's simple to use and doesn't require a degree in software use to make effective DVD's playable in all DVD players.I shoot my footage with a Panasonic NV-MX300 3 CCD camcorder, which although a few years old now, can hold it's own with lower end so called HD Camcorders
My method of creating a DVD has been to capture the footage using a third-party Video editor and then importing it's export into Movie Factory and then work from there.
I have recently upgraded my version of MovieFactory 6 Plus to VideoStudio Pro X4 as this seems to better support the creation of HD BluRay discs. No I don't have the Power Pack Plug-in with my version of MovieFactory but thought that upgrading would better suit my needs.I have created, successfully a 35Gb .AVI file using my third-party NLE and it's properties are as follows: -
Stream 0
Type: Video
Codec: DV Video (dvsd)
Resolution: 720x576
Frame rate: 25
Stream 1
Type: Audio
Codec: PCM S16 LE (araw)
Channels: Stereo
Sample rate: 48000 Hz
Bits per sample: 16
My original DV footage was roughly this too. It was shot in Widescreen although the sound was recorded in 32000 Hz stereo. When I import the video into either MF 6 or VS Pro 4 the playback is in a squashed 4:3 aspect Ratio and no matter how I alter the preferences or Project Settings, before or after importing the .AVI file, it refuses to play back in widescreen.When the exported file plays in VLC Player or Windows Media Player, it plays back correctly.
View 14 Replies
ADVERTISEMENT
Aug 23, 2011
I just upgraded to the X4. I never had this problem with the X3. I use a hitachi camcorder and the clips it produces are mpeg. The settings I use on the X4 are the default settings. When I place the clips on the timeline, they show up as 16:9. When I press play, they are still in 16:9 format.
However, when I create a video file using option DVD 16:9, I get the following problem. While the clip is playing, it will start as 16:9 then change to 4:3 and then back to 16:9 again and so on.
Is there a setting that I'm supposed to change. This never happened with the X3.
View 3 Replies
View Related
Nov 24, 2010
Downloaded and installed the latest VS X3 trial version 13.6.2.42. Direct X is installed on the PC.
There is a problem when I try to play in VS X3 any MPEG2 file created with the earlier version of VS 7SE. The video playback is too fast and I hear only an intermittent high pitch noise. There is no problem playing the same file with the Windows Media Player.
I can play without problem .avi file captured from a DV camcorder. The VS X3 sample files play fine as well.
View 9 Replies
View Related
Dec 27, 2012
I own the video cebtric site [URL] which is judo related and i have over 5000 videos in stanrdard and h.d. quality. I want to resolve the issue below so i can buy the product and use it without problems. I download the trial version of video studio x5..tried to export my recorded video in the size 640x360 but this wasn't possible....no option at all. I am wondering how i can do that.. When i insert a .mp4 video the option ''same as project'' is on and when i make convrsion the result is ok like the original. When i record a video and try to export ''same as project'' the option is off and i can't do my wishing size 640x360.
View 4 Replies
View Related
Jan 5, 2013
I have a new camera which records in AVCHD format. I have transferred the video files from my camera to the computer. I have compiled a project on Video Studio ProX2. When I playback each clip they play at normal speed. When I playback the project before copying onto a disc the playback is very fast. I have also got as far as sharing the project onto a disc but when I click on preview the playback is again very fast. I see that I can slow down the playback but this also slows down any speech on the video.
I have used Video studio PRox for a couple of years now with great success with an old Sony Handycam but I must need to do something to the new format to play it back at normal speed.
View 9 Replies
View Related
Nov 29, 2012
All the videos I've produced with VS Pro X5 have a tendency to "loop" back to the beginning and replay...
how to prevent that?
View 4 Replies
View Related
Jun 20, 2011
I just finished editing MP4 videos with Corel VideoStudio x3. I exported the videos in the same format. The problem i am having with all of the videos is that when I try to view them with Adobe Flash Player All I get is the audio portion of the video and the Adobe controller is visible. I have tried to exporting the videos in a few different MP4 formats but none seem to work?
View 5 Replies
View Related
Aug 28, 2013
When I play video clips back in the playback window, they shake and stutter and give an "after-effect" look to each clip. Looks like mouse trails if you select that in your setup. I am running the program in Windows 8 64 bit, if that matters, but don 't see why it should. When I play the clips in Windows Media player, just to check to see if it is the clips, none of this behavior occurs. Never ran into this one before and I have been with VS since the good old days of version 4.
I rendered a few clips that were doing that into the final MPG format I want and the shakiness is not there once rendered. It can only mean that I have something ticked or un-ticked in my setup of VS Pro 16 Ultimate. It makes it difficult to stitch together the final clips with pinpoint accuracy.
View 14 Replies
View Related
May 4, 2011
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
The manufacturer of the flip camera is suggesting that since the footage can play fine with the camera program (Arcsoft Media Impression) the problem seems to be related to the player codec on my computer. They suggested that I download the latest K-Lite Codec Pack to see if that would resolve the problem.
View 2 Replies
View Related
Apr 24, 2011
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
View 14 Replies
View Related
May 10, 2012
We are now using Canon X10 HD cameras and recording in h.264 1440 X 1080. The finished product has to be MPEG2 for Public Access TV broadcast.
I can't seem to be able to adjust settings to accomplish this. Both Custom and Movie Template have the user defined button greyed out.
View 11 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 28, 2012
My X4 project is done in 16:9 and I can render to MPEG-2 in widescreen but not Flash. I want to publish on Blip.TV and YouTube.
View 11 Replies
View Related
Sep 18, 2011
I have run into a roadblock -- I am having trouble authoring my DVD. I have watched the tutorials and read (and re-read) the User Guide.
I used my Canon HF S200 to shoot video of family reunions. It is about 2 1/2 hours long and I have about 32 chapters. I am ready to burn a DVD. but my chapters weren't appearing in the DVD Preview.
Further investigation showed that my project is 10.01 GBs and that my DVD only has 4.38 GB usable space.
It doesn't make sense to me. I rent Hollywood movies all the time that are nearly 3 hours long -- and those are certainly much more detailed than my little video.
I really don't want to split this project into 3 DVDs == that would be stupid.
How can I adjust settings so that my DVD fits -- and all of my Chapters appear in the DVD Preview prior to burning? I would like wide screen setting.
View 6 Replies
View Related
Apr 11, 2011
I have video studio 7 SE DVD. When I capture edit and share my file and burn it to DVD, the picture looks fat and stretched whenplayed on a widescreen TV.
I have played around with some of the properties and setting on the program but everything I do has the same effect.
I can have the TV set to 4.3 and the picture is fine but of course I have the black bars on each side.
Is there a way to have it show correctly on the widescreen TV without affecting the quality?
I dont mind if it cut some of the picture out as in top and bottom, I just want to keep the picture the right ratio without stretching it to fit.
My video camera I am using is a DV cam. I think it might be half the problem as it records in 4.3 format and is playing on a 16.9 TV.
View 3 Replies
View Related
Jan 31, 2012
I've recently changed from PC to Laptop and reinstalled Videostudio x4.
On my last PC (which was considerably older and less capable) while using the stop-motion editor, I could capture in upto 1280 x 720 resolution using my Microsoft Lifecam 5000 HD - however now with the same camera after the reinstall the highest resolution on the drop-down menu is 640 x 480 which obviously isnt widescreen or anywhere near in terms of resolution.
One thing which could be related is that on this laptop I have two lots of "program files" - "Progam Files" and "Program Files (x86)". The program itself is installed on the x86 section but when VS is searching for sample videos or overlays etc they've all needed relinking as its attempting to find them in the normal "Program Files" folder - could the resolution problem be a similar relinking issue?
View 1 Replies
View Related
May 17, 2012
Aspect ratio I am putting togeter a slideshow of photos I want it to be widescreen!
I have gone into settings/preferences/edit in the section for image I have "Keep Aspect Ratio"
After selecting some images dropping them into the timeline if I put them in the main track (top) the Aspect Ratio is keeped Now if I put the same images in any overlay track the Aspect Ratio is changed! Is there a way to have the Aspect Ratio keep when putting images in a overlay track or do I have to manually set Keep Aspect Ratio?
View 14 Replies
View Related
Aug 29, 2011
My video properties are 16:9, but VSX4 isn't letting me change them. And there's no splash screen to start with.
How do I change it? I just spent weeks going through all of my photos and putting the 4:3 on backgrounds to make them all 16:9. My video is already at 16:9.
View 6 Replies
View Related
Jan 4, 2013
I just downloaded the trial version CS6. I imported into Photoshop, Pro Res 422 HQ clips and it plays back very choppy. When exported it remains choppy.
View 4 Replies
View Related
Mar 8, 2014
After rendering a few clips in my timeline for playback, my video tracks are no longer playing back. The timeline time marker plays, the time counts, and the audio playback is working correctly, but the video stays on the frame in which playback started, and does not move change until pausing playback.
View 2 Replies
View Related
Apr 1, 2014
I was watching through footage and choose a handful of clips ... my video worked fine. Then Friday I came back to start putting everything together and the clips "went blank," The audio could be heard and played back in real time, but the video displays as a black screen or a green screen. I tried rendering, but it said it would take 2+ hours to render the 1 minute of clips I had in my timeline. Even the sections that did end up rendering just showed a blank red screen. Clips are .MTS (which I've used in every project previously with no problem) shot with a Panaconic HMC-150.
I'm using Adobe Premiere Pro CS6 on Windows 8, 64-bit operating system
Processor: Intel Core i7 CPU - 920 @ 2.67 GHz
12.0 GB of RAM
The thing that gets me is that this has worked for months, even worked with these clips a few days ago, and now it seems like everything just vanished.
View 2 Replies
View Related
Jan 7, 2013
In CS6, When editing Pro Res 422, Video with single layer plays back fine but with 3 layers playback and export are very choppy. I tried merging layers but the video doesn't playback at all. Is there any other settings I could try?
CS6 memory usage is 100%, sound is turned of in TL. System MacPro -Quad Core Intel Xeon-Processor Speed 3 GHz, Memory 8GB.
View 6 Replies
View Related
Mar 26, 2012
I have the error, that the animation preview can't start my media player...
I allways get two errors: One from windows (the german one) and one from max...
My default media player is "media player classic home cinema". If i click on a AVI file in explorer, mpchc will launch and play it. So the file associate are ok. But max can't start it.
This is not related to max 2012... I have this error since many versions of max...
[URL]
View 2 Replies
View Related
Jan 10, 2012
And so does the export. I'm on a Mac.
Premiere is fine, but not Lightroom.
View 1 Replies
View Related
Sep 20, 2013
LR5.0/5.2 64-bit Win 7--
I am occasionally getting an error message when trying to view .MOV files from a Nikon D600: Video System Error: unknown Message: BindSuccess. Once that error pops up, I cannpt view any movies until I restart Lightroom. However, I do not have any problems viewing any of the files with Windows Media Player. What is causing this? I have an AMD Radeon 6700 HD series video card and a lot of RAM.
View 2 Replies
View Related
Dec 20, 2013
When capturing HDV clip with Premier Pro CC and playing it in the timeline, the video stutters. I play the same captured clip in Windows Media Player, and it look great. I am using Adobe Premiere Pro CC.-Version 7.2.1(4)
I have the following equipment:
Camera
Canon XH-A1S (set to HDV 60i)
Processor:
Intel® Core™ i7-4930K CPU @ 3.40GHz
Memory:
32 GB
System Type:
64-bit Operating System
Rating:
7.8 Windows Experience Index
Graphics Card
GeForce GTX 760
Solid State Drive
Samsung SSD 840 EVO 750G SCSI Disk Device
Resolution
1920x1200, 59Hz
BD-RW
Pioneer BDR-208D ATA Device
Monitor
Dell U2412M
Clip properties:
Type: MPEG Movie
File Size: 1.1 GB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00;06;04;06
Pixel Aspect Ratio: 1.3333
View 25 Replies
View Related
Jun 26, 2011
My latest problem is file formats! I have two cameras, one of which produces .AVI video format. I have found that Corel does not "read" this format - or am I wrong? I am working from a card reader. I have succeeded in using the latter files in VS but only by converting to MP3. I don't want to part with this very handy camera so am I missing something in that perhaps I can change some setting to enable Corel to recognise .AVI files? I don't want to have to use the editing suite which came with my Traveller camera. I have found it is easy to load via Picasa - which accepts many formats - but it's when I come to insert media file to the VS library that the trouble starts - obviously because the files are .AVI.
View 2 Replies
View Related
Nov 6, 2013
I recently purchased Corel Video Studio Pro X6. So far it has worked great except for one issue. When using it to make DVD's, the file take up far more room than the actual file size is.
I've converted old VHS tapes to .mpg files and I planned on using Corel to create DVD's, with menus, for my family. I ran into the issue of the files being far too big, so after some research I discovered that .mpg files were not size efficient. I then used Corel to convert them to .mp4 files. So now, for example, a file that was 1.06GB (.mpg) is no 70.7MB (.mp4). So on disc the files are considerably smaller, with little to no video/audio loss. But, once I opened up Corel and started a new project and tried to use the new smaller files they still take up just about the same amount of space on the DVD's. On my HDD all of the converted files take up the same amount of disc space as just a few of the original files. Yet on the DVD I can still only fit 3-4 videos.
View 3 Replies
View Related
Aug 13, 2011
I just downloaded/installed Video Studio X4 Pro. Quite impressive. I've been using Roxio but too many problems so wanted to see if Corel is better. Have a minor problem that I haven't been able to solve. Background: I have 16 individual videos of foreign "soap operas" (all approx 3.7gb). All videos are either mpeg2 or avi. I copied all of them with no problem. Then, I wanted to eliminate some useless things at the beginning and end of each one. I went into a video editing program and trimmed approx 5 secs from the beginning and end of each video. After the trimming, I saved the videos to my hard drive in the My Videos folder in the Libraries. Then, because of some difficulties with Roxio, I decided to try Corel.
When I import a video, click on Tools, Create Disc, DVD, unmark Menu, then Burn, I always get the error telling me the total size is larger than the chosen project. This is what I don't understand. If the video, which is approx. 3.7gb,and I'm using a 4.7gb dvd, why am I getting this error? FYI: I went ahead and clicked on Yes, try to fit to disc, and after approximately 45 mins, it completed, ejected the disc and all I had was approx. 1/8" burn area. The properties of that disc showed it was a video.ts and when I clicked on it, the windows player opened and said can't be rendered. I don't under stand why X$ Pro says a 3.7gb video is over 7gb.
View 7 Replies
View Related
Oct 13, 2010
So like many new videographers is am shooting with the 5d markII which obviously shoots in HD.
However i cant seem to export my HD file out of VideoStudio.
When i drag the clip onto the timeline and right click on the clip and go to properties it says it is in 1920x1080. However when i go to create a video file ans click same as video settings it exports it to 720x480 at 29.97 frames per second. And the video was shot at 24fps.
So..
a) i don't understand why it is exporting it to totally different specs that what the project really is?
b) how to i export to an mpeg file that is 1920x1080 from VideoStudio.
View 2 Replies
View Related
Jan 15, 2011
I'm trying to use VideoStudio X2 to burn to DVD a file that I’ve downloaded to my laptop from my hard disk set top box . When I play the file in VideoStudio it's silent (whether or not I’ve added it to the timeline). However when I view the file (a .ts ) in Windows Media Player it has sound.
If I view other .ts video files in VideoStudio they do have sound, which suggests the sound for my laptop and VideoStudio aren't completely muted.I've attached a screen shot that shows the audio file properties as well as other settings.
Software: Pro X2 (VideoStudio v12.0.96.1)
Toshiba Satellite L500-1WG
Windows 7, Home Premium, 64 bit
Pentium Dual Core CPU, T4400, 2.2GHz, 4 GB RAM
Video type: PAL
View 9 Replies
View Related
