VideoStudio :: X5 - No Option For Video In 640x360 (widescreen)?
Dec 27, 2012
I own the video cebtric site [URL] which is judo related and i have over 5000 videos in stanrdard and h.d. quality. I want to resolve the issue below so i can buy the product and use it without problems. I download the trial version of video studio x5..tried to export my recorded video in the size 640x360 but this wasn't possible....no option at all. I am wondering how i can do that.. When i insert a .mp4 video the option ''same as project'' is on and when i make convrsion the result is ok like the original. When i record a video and try to export ''same as project'' the option is off and i can't do my wishing size 640x360.
View 4 Replies
ADVERTISEMENT
Jan 31, 2012
I've recently changed from PC to Laptop and reinstalled Videostudio x4.
On my last PC (which was considerably older and less capable) while using the stop-motion editor, I could capture in upto 1280 x 720 resolution using my Microsoft Lifecam 5000 HD - however now with the same camera after the reinstall the highest resolution on the drop-down menu is 640 x 480 which obviously isnt widescreen or anywhere near in terms of resolution.
One thing which could be related is that on this laptop I have two lots of "program files" - "Progam Files" and "Program Files (x86)". The program itself is installed on the x86 section but when VS is searching for sample videos or overlays etc they've all needed relinking as its attempting to find them in the normal "Program Files" folder - could the resolution problem be a similar relinking issue?
View 1 Replies
View Related
Aug 23, 2011
I just upgraded to the X4. I never had this problem with the X3. I use a hitachi camcorder and the clips it produces are mpeg. The settings I use on the X4 are the default settings. When I place the clips on the timeline, they show up as 16:9. When I press play, they are still in 16:9 format.
However, when I create a video file using option DVD 16:9, I get the following problem. While the clip is playing, it will start as 16:9 then change to 4:3 and then back to 16:9 again and so on.
Is there a setting that I'm supposed to change. This never happened with the X3.
View 3 Replies
View Related
Apr 30, 2011
I have used on and off MovieFactory for a number of years and have been well pleased. It's simple to use and doesn't require a degree in software use to make effective DVD's playable in all DVD players.I shoot my footage with a Panasonic NV-MX300 3 CCD camcorder, which although a few years old now, can hold it's own with lower end so called HD Camcorders
My method of creating a DVD has been to capture the footage using a third-party Video editor and then importing it's export into Movie Factory and then work from there.
I have recently upgraded my version of MovieFactory 6 Plus to VideoStudio Pro X4 as this seems to better support the creation of HD BluRay discs. No I don't have the Power Pack Plug-in with my version of MovieFactory but thought that upgrading would better suit my needs.I have created, successfully a 35Gb .AVI file using my third-party NLE and it's properties are as follows: -
Stream 0
Type: Video
Codec: DV Video (dvsd)
Resolution: 720x576
Frame rate: 25
Stream 1
Type: Audio
Codec: PCM S16 LE (araw)
Channels: Stereo
Sample rate: 48000 Hz
Bits per sample: 16
My original DV footage was roughly this too. It was shot in Widescreen although the sound was recorded in 32000 Hz stereo. When I import the video into either MF 6 or VS Pro 4 the playback is in a squashed 4:3 aspect Ratio and no matter how I alter the preferences or Project Settings, before or after importing the .AVI file, it refuses to play back in widescreen.When the exported file plays in VLC Player or Windows Media Player, it plays back correctly.
View 14 Replies
View Related
Oct 17, 2010
If I have two cameras pointing toward one subject (say someone being interviewed) what would be the best way to place the two video tracks in X3?
One I would be the main video track, but would the other have to be the over lay track? Is there an option to create a 2nd main video track that I could switch between? So when I am editing an interview clip I could pick between video track 1 or 2 and choose the angle I want?
View 8 Replies
View Related
May 10, 2012
We are now using Canon X10 HD cameras and recording in h.264 1440 X 1080. The finished product has to be MPEG2 for Public Access TV broadcast.
I can't seem to be able to adjust settings to accomplish this. Both Custom and Movie Template have the user defined button greyed out.
View 11 Replies
View Related
Feb 28, 2012
My X4 project is done in 16:9 and I can render to MPEG-2 in widescreen but not Flash. I want to publish on Blip.TV and YouTube.
View 11 Replies
View Related
Sep 18, 2011
I have run into a roadblock -- I am having trouble authoring my DVD. I have watched the tutorials and read (and re-read) the User Guide.
I used my Canon HF S200 to shoot video of family reunions. It is about 2 1/2 hours long and I have about 32 chapters. I am ready to burn a DVD. but my chapters weren't appearing in the DVD Preview.
Further investigation showed that my project is 10.01 GBs and that my DVD only has 4.38 GB usable space.
It doesn't make sense to me. I rent Hollywood movies all the time that are nearly 3 hours long -- and those are certainly much more detailed than my little video.
I really don't want to split this project into 3 DVDs == that would be stupid.
How can I adjust settings so that my DVD fits -- and all of my Chapters appear in the DVD Preview prior to burning? I would like wide screen setting.
View 6 Replies
View Related
Apr 11, 2011
I have video studio 7 SE DVD. When I capture edit and share my file and burn it to DVD, the picture looks fat and stretched whenplayed on a widescreen TV.
I have played around with some of the properties and setting on the program but everything I do has the same effect.
I can have the TV set to 4.3 and the picture is fine but of course I have the black bars on each side.
Is there a way to have it show correctly on the widescreen TV without affecting the quality?
I dont mind if it cut some of the picture out as in top and bottom, I just want to keep the picture the right ratio without stretching it to fit.
My video camera I am using is a DV cam. I think it might be half the problem as it records in 4.3 format and is playing on a 16.9 TV.
View 3 Replies
View Related
May 17, 2012
Aspect ratio I am putting togeter a slideshow of photos I want it to be widescreen!
I have gone into settings/preferences/edit in the section for image I have "Keep Aspect Ratio"
After selecting some images dropping them into the timeline if I put them in the main track (top) the Aspect Ratio is keeped Now if I put the same images in any overlay track the Aspect Ratio is changed! Is there a way to have the Aspect Ratio keep when putting images in a overlay track or do I have to manually set Keep Aspect Ratio?
View 14 Replies
View Related
Aug 29, 2011
My video properties are 16:9, but VSX4 isn't letting me change them. And there's no splash screen to start with.
How do I change it? I just spent weeks going through all of my photos and putting the 4:3 on backgrounds to make them all 16:9. My video is already at 16:9.
View 6 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Aug 9, 2013
In CS5 I could export my video files as AVI. Where can I find this option in CC?
View 10 Replies
View Related
Nov 11, 2012
how to fix an audio issue with exporting video from Photoshop.I am choosing the quick time format however the option for sound is always grayed out. from the animation panel I have the audio enabled and I can hear it when I play back from within Photoshop.
I am using Photoshop CS4 extended on PC Windows 7.I understand the following -
-For audio I need to choose Quicktime format
-Photoshop is primarily image editing software (with video capabilities)
View 3 Replies
View Related
Jul 29, 2013
my 'Convert To Video Timeline' Option has gone missing from my Photoshop. I'm using Photoshop CS6 Extended Version.I have tried uninstalling it and reinstalling it numerous times.I have tried running it in 32-bit as well as 64-bit.The option isn't in the Panel Fly-Out menu either.I have also noticed that I can no longer open videos in Photoshop.I have tried resetting my Preferences, as well.
View 2 Replies
View Related
Apr 10, 2013
I'm currently using CS6 to make Gifs with Frame Animation using the Video Frames to Layers. I want to convert my Frame Animation to Video Timeline but it won't let me do it. Can I do it with CS6 or do I need CS6 extended?
View 3 Replies
View Related
May 27, 2012
Is there a way to disable lightroom 4 from importing or processing any file with a video extension mkv, 3gpp etc, as its really slowing down my workflow.
My typically workflow consists of pulling my files off of my memory carsd manually via explorer (into a specific folder under a root folder which I create manually). I then synchronise the root folder in lightroom.
Unfortunately LR4 seems to take over and hour to do this since I have a lot of uncateloged videos. LR fails each time to catalog the videos.
LR3, since it didn't support video, was blazingly fast and performing the same operations in LR3 takes minutes as oppose to hours.
View 2 Replies
View Related
Sep 28, 2005
I have a widescreen laptop and obviously when I display Photo's they are distorted. Can anyone tell me if there is a set formular to diplay photo's to look normal on a widescreen computer, ie with Skew or Transform or something. At present I just guess using "Free Transform", but I'm sure there must be a more scientific method in my Photoshop CS.
View 9 Replies
View Related
Mar 9, 2012
I was setting up some of my defaults in the newly installed X5 and I went to setup a flv template, and no flash option!?!?
View 5 Replies
View Related
Oct 22, 2012
I recently upgraded from VS Pro X4 to VS Pro X5 and was shocked to see that there is no option to output a project to FLV under '3 Share > Create Video File'. Is this a feature removal or am I cursed with a defective copy of VS Pro X5?
As you can see in the screen above, the option (which was located at the bottom of the menu in VS Pro X4) is absent in VS Pro X5.
View 3 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Feb 2, 2011
A year ago is was on vacantion in italia (Pisa), I made there some pictures from the building around the Tower of pisa. And i never thought about I can make a widescreen with that pictures. But now I dont get it attached to each other.
Here are the pics
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
And this is how i get them attached:
Missing 1 picture here
As you can see the colours do not match, and the whole picture is crooked.
View 1 Replies
View Related
Apr 26, 2011
In VS X4 I see the clouds, rain, lightning, but did not see an option for snow in FX. How to do that or where I could download one
View 4 Replies
View Related
Sep 27, 2011
I shoot AVCHD video from my Canon Vixia HF S 21 at the highest setting of 24 Mbps / 60i. I have a Lite-On BD Burner and make BD-R discs. Originally when creating the movie that will be burned to disc, I was using the Blue Ray option (MPEG2 25000kbps). I was not happy as I saw much degradation of the image. I know from users on this forum that H.264 is the prefered format, but VS X3 limits you to 20000kbps, which will result in an even more degraded image. (Will this limit be removed in VS x5??)
What I found by accident was in the above project, use the option "Same as first clip". This resulted in an H.264 video, VBR 22700 kbps and the video is very sharp on my 55" LCD TV compared to the MPEG2 compression. So I am quite happy with this setting.
My problem is on my project right now, the Same as first clip option is grayed out. Why is this happening? Could it be that this time I captured as real 24F rather than in 60i format? My only option is MPEG2 for BLuRay, or use MPEG optimizer which still shows Mpeg2 but now VBR is 22700 rather than 25000 kbps. There is no way to get it to render as H.264. BTW I also noticed this the other day when rendering a project from video from my wife's Flip camera.
View 6 Replies
View Related
Sep 5, 2013
I have created a project using 1080p 29.97fps AVC MOV clips.
However, there seems to be no way to create a video file from the project using these settings. The options include neither 1920x1080 or anything but 25fps, and of course trying this results in choppy footage.
NB I did not choose either PAL or NTSC options when installing, as we will no longer use either of these in this country as of next year and I have no need to use them anyway.
Also I cannot install Ultimate as it says it is not compatible with this computer (Microsoft Surface Pro), only Pro.
View 11 Replies
View Related
Nov 20, 2011
I recently used two Camcorders at a wedding and one (Panasonic NV-GS500) when connected via firewire to VS XP Pro3 showed up straight away with DV (AVI) download option - which is obviously the quality I want/need. The other Camcorder was a Canon HDV HV30 and it only offered MPEG download quality option. Both camcorders used Panasonic DV tapes and both are HD Digital camcorders so why would one offer DV and the other MPEG?
How do I capture from the Canon in AVI? I turned every thing off (VS and canon camcorder) and this time DV option presented itself.
View 2 Replies
View Related
Dec 19, 2008
My Viewsonic vx924 quit so I bought two more 19" widescreen monitors. Both have very uneven color and display a mustard color even after calibrating. It is almost impossible to buy a 4:3 aspect ratio any more. My Spyder is old and may need replacing but it seemed to work after reducing monitor from widescreen to 4:3. It almost looks like a dark to light gradient across the monitor.
Question: What are you doing to prevent this with your widescreen? Can they be calibrated? What brand widescreen monitor works for you with CS3?
View 8 Replies
View Related
Apr 5, 2013
AVCHD and blu ray are the same. I have an HD camcorder which supports AVCHD. Is this the same as blu ray or just Hd. If I chose the AVCHD option to burn a disc will this be blu ray and can I use a standard DVD to burn it and will I need a blu ray player to watch it.
View 14 Replies
View Related
Apr 3, 2013
A curious thing I have just noticed is that I no longer have any DivX showing as an AVI option under Custom in either X5 or X6. Don't get me wrong: I know all about the DivX woes of other users here. But on this same computer, I have always been able to update to the latest version of DivX and use it with no problem. Today I updated DivX to the very latest version, and went to make sure it showed in VS, but it was not there in either X5 or X6. Nor can either program "see" DivX clips I have stored on the computer.
A few weeks ago, I was having trouble getting X6 to see the various proDad and Boris filters added in the Ultimate package. That was eventually resolved, but in the process I had to uninstall and reinstall both versions. Something else obviously happened then and I am pretty sure it removed the DivX capacity, since all I have now showing under the AVI Compression option, apart from uncompressed, is DV Types 1 and 2, and the MJPEG codec. I used to have a lot more, including, apart from DivX, Cinepak, Microsoft mpeg-4 V1 and V2, ffdshow, Intel IYUV and XVid.
FYI, I have tried renaming the 15.0 and 16.0 folders in Win 7 C:Documents and Settings[My Name]Application DataRoamingUlead SystemsCorel VideoStudio Pro I realise that is mainly to do with repopulating the filters, but thought I would give it a go.
I also re-loaded an older version of DivX which I know had previously worked in X5, though I had never checked it in X6 (8.2.2). That did not work either, including after a reboot.
Also FWIW, I uninstalled XVid, which had previously showed up in X5, and reinstalled it. But it still does not show in either X5 or X6, including after a reboot.
FWIW, I have also checked on another computer on which I have X5 (though not X6 yet) loaded, and that has all the AVI filters mentioned above as missing, plus a variety of others specific to that computer (related to a Matrox program I have loaded on it).
View 1 Replies
View Related
Jul 10, 2013
With one of my project files, when I try to create disc in VS Pro X4 only option DD-J is highlighted. When I try to select DVD or any of the other options, the project loads to 59% then the whole program freezes and the following dialogue box appears.
The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis.
C:DOCUME~1userLOCALS~1Tempvstudio_14.0.0.342_20130216_144133.DMP
When I click on OK I get the message that the program needs to close and it just shuts down. I am using Windows XP. I have 12 other project files that I can create to disc without any problem.
View 2 Replies
View Related
