VideoStudio :: Unable To Use HD 30fps Option?
Sep 5, 2013
I have created a project using 1080p 29.97fps AVC MOV clips.
However, there seems to be no way to create a video file from the project using these settings. The options include neither 1920x1080 or anything but 25fps, and of course trying this results in choppy footage.
NB I did not choose either PAL or NTSC options when installing, as we will no longer use either of these in this country as of next year and I have no need to use them anyway.
Also I cannot install Ultimate as it says it is not compatible with this computer (Microsoft Surface Pro), only Pro.
View 11 Replies
ADVERTISEMENT
Nov 15, 2010
When outputting as an MP4 file, the result is SO ugly, it almost completely destroys any fine detail in the image, and the sound is total garbage (it sounds like a 22k 64kbps mp3, just utter crap), so MP4 is just not an option for me.
Unfortunately, as it has been brought to my attention, Corel doesn't seem to truly support 60fps, even though most new cameras film in 60fps--so when I use the modes that are supposed to be for 60fps, it flipflops back and forth between 30fps and 60fps. I just want an output that's consistent, not this flipflopping garbage. There's ONE mode I can use, AVCHD, that gives me a consistent framerate AS LONG AS I don't put any titles up, and as long as none of the source material is of a resolution different from the main--otherwise it will look like a glitched mess.
Since they've crippled being able to adjust the project properties outside anything DVD quality, I can't really adjust anything.
Is there an output mode that will give me a consistent 30fps that supports 1080p?
View 2 Replies
View Related
Mar 25, 2012
I am trying to output a project at higher than 30fps and I am failing miserably. My camera can create 1080 mp4 files at 30fps or 720 mp4 files at 30 or 60fps. I want to creat a video using 720 at 60fps (or near to it).
If I load a 60fps clip and play the clip it runs at the original frame rate. If I play the project however, it plays at 25fps. I have tried to change the project properties, but I cannot select anything higher than 25fps in mpg (or 30fps in avi). Likewise, when I create a video file I am stuck at the lower frame rate. Although I am happy with the 1080X30fps clips and projects; it defeats the object of having a faster camera.
View 3 Replies
View Related
Apr 26, 2011
In VS X4 I see the clouds, rain, lightning, but did not see an option for snow in FX. How to do that or where I could download one
View 4 Replies
View Related
Oct 30, 2012
I'm wondering how to convert a scene from 30 fps to 24 fps. It's a tracked scene, the tracking comes from PFtrack. When I convert it, the tracking is off.
View 1 Replies
View Related
Apr 30, 2012
I recently had to reinstall everything on my PC, including Photoshop 7, now when I click print preview, 10x8 is not coming up as an option .
View 2 Replies
View Related
Apr 22, 2011
While using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
View 4 Replies
View Related
Mar 9, 2012
I was setting up some of my defaults in the newly installed X5 and I went to setup a flv template, and no flash option!?!?
View 5 Replies
View Related
Oct 22, 2012
I recently upgraded from VS Pro X4 to VS Pro X5 and was shocked to see that there is no option to output a project to FLV under '3 Share > Create Video File'. Is this a feature removal or am I cursed with a defective copy of VS Pro X5?
As you can see in the screen above, the option (which was located at the bottom of the menu in VS Pro X4) is absent in VS Pro X5.
View 3 Replies
View Related
Sep 27, 2011
I shoot AVCHD video from my Canon Vixia HF S 21 at the highest setting of 24 Mbps / 60i. I have a Lite-On BD Burner and make BD-R discs. Originally when creating the movie that will be burned to disc, I was using the Blue Ray option (MPEG2 25000kbps). I was not happy as I saw much degradation of the image. I know from users on this forum that H.264 is the prefered format, but VS X3 limits you to 20000kbps, which will result in an even more degraded image. (Will this limit be removed in VS x5??)
What I found by accident was in the above project, use the option "Same as first clip". This resulted in an H.264 video, VBR 22700 kbps and the video is very sharp on my 55" LCD TV compared to the MPEG2 compression. So I am quite happy with this setting.
My problem is on my project right now, the Same as first clip option is grayed out. Why is this happening? Could it be that this time I captured as real 24F rather than in 60i format? My only option is MPEG2 for BLuRay, or use MPEG optimizer which still shows Mpeg2 but now VBR is 22700 rather than 25000 kbps. There is no way to get it to render as H.264. BTW I also noticed this the other day when rendering a project from video from my wife's Flip camera.
View 6 Replies
View Related
Nov 20, 2011
I recently used two Camcorders at a wedding and one (Panasonic NV-GS500) when connected via firewire to VS XP Pro3 showed up straight away with DV (AVI) download option - which is obviously the quality I want/need. The other Camcorder was a Canon HDV HV30 and it only offered MPEG download quality option. Both camcorders used Panasonic DV tapes and both are HD Digital camcorders so why would one offer DV and the other MPEG?
How do I capture from the Canon in AVI? I turned every thing off (VS and canon camcorder) and this time DV option presented itself.
View 2 Replies
View Related
Dec 27, 2012
I own the video cebtric site [URL] which is judo related and i have over 5000 videos in stanrdard and h.d. quality. I want to resolve the issue below so i can buy the product and use it without problems. I download the trial version of video studio x5..tried to export my recorded video in the size 640x360 but this wasn't possible....no option at all. I am wondering how i can do that.. When i insert a .mp4 video the option ''same as project'' is on and when i make convrsion the result is ok like the original. When i record a video and try to export ''same as project'' the option is off and i can't do my wishing size 640x360.
View 4 Replies
View Related
Apr 5, 2013
AVCHD and blu ray are the same. I have an HD camcorder which supports AVCHD. Is this the same as blu ray or just Hd. If I chose the AVCHD option to burn a disc will this be blu ray and can I use a standard DVD to burn it and will I need a blu ray player to watch it.
View 14 Replies
View Related
Apr 3, 2013
A curious thing I have just noticed is that I no longer have any DivX showing as an AVI option under Custom in either X5 or X6. Don't get me wrong: I know all about the DivX woes of other users here. But on this same computer, I have always been able to update to the latest version of DivX and use it with no problem. Today I updated DivX to the very latest version, and went to make sure it showed in VS, but it was not there in either X5 or X6. Nor can either program "see" DivX clips I have stored on the computer.
A few weeks ago, I was having trouble getting X6 to see the various proDad and Boris filters added in the Ultimate package. That was eventually resolved, but in the process I had to uninstall and reinstall both versions. Something else obviously happened then and I am pretty sure it removed the DivX capacity, since all I have now showing under the AVI Compression option, apart from uncompressed, is DV Types 1 and 2, and the MJPEG codec. I used to have a lot more, including, apart from DivX, Cinepak, Microsoft mpeg-4 V1 and V2, ffdshow, Intel IYUV and XVid.
FYI, I have tried renaming the 15.0 and 16.0 folders in Win 7 C:Documents and Settings[My Name]Application DataRoamingUlead SystemsCorel VideoStudio Pro I realise that is mainly to do with repopulating the filters, but thought I would give it a go.
I also re-loaded an older version of DivX which I know had previously worked in X5, though I had never checked it in X6 (8.2.2). That did not work either, including after a reboot.
Also FWIW, I uninstalled XVid, which had previously showed up in X5, and reinstalled it. But it still does not show in either X5 or X6, including after a reboot.
FWIW, I have also checked on another computer on which I have X5 (though not X6 yet) loaded, and that has all the AVI filters mentioned above as missing, plus a variety of others specific to that computer (related to a Matrox program I have loaded on it).
View 1 Replies
View Related
Jan 31, 2012
I've recently changed from PC to Laptop and reinstalled Videostudio x4.
On my last PC (which was considerably older and less capable) while using the stop-motion editor, I could capture in upto 1280 x 720 resolution using my Microsoft Lifecam 5000 HD - however now with the same camera after the reinstall the highest resolution on the drop-down menu is 640 x 480 which obviously isnt widescreen or anywhere near in terms of resolution.
One thing which could be related is that on this laptop I have two lots of "program files" - "Progam Files" and "Program Files (x86)". The program itself is installed on the x86 section but when VS is searching for sample videos or overlays etc they've all needed relinking as its attempting to find them in the normal "Program Files" folder - could the resolution problem be a similar relinking issue?
View 1 Replies
View Related
Jul 10, 2013
With one of my project files, when I try to create disc in VS Pro X4 only option DD-J is highlighted. When I try to select DVD or any of the other options, the project loads to 59% then the whole program freezes and the following dialogue box appears.
The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis.
C:DOCUME~1userLOCALS~1Tempvstudio_14.0.0.342_20130216_144133.DMP
When I click on OK I get the message that the program needs to close and it just shuts down. I am using Windows XP. I have 12 other project files that I can create to disc without any problem.
View 2 Replies
View Related
Nov 28, 2012
I have VideoStudio Pro X5 Ultimate (full paid for version) but I am unable to select the 'Enable Hardware Encoder Acceleration' option under Preferences/Performance as the option is greyed out.
I have an nVidia GTX660 Ti 3GB made by EVGA. This has a CUDA based CPU and according to Corel's advertising, VS Pro X5 is designed for this chipset, and so I cannot understand why the option to enable it is not available.
Some comments from Corel support I found that this option isn't required for CUDA cards as they are enabled and used by default. However, I have just done a test render of a 1920x1080 AVI clip to MP4 using H.264 and monitored both my CPU (dual Xeon E5420) and GPU utilisation. The CPUs hit 90% whilst the GPUs sat there doing nothing at all other than basic screen rendering rather than any encoding. Corel's comments are incorrect.
Also, I have a support case open with Corel but TBH, I don't hold out much hope as their last response was "If the hardware acceleration options are greyed out, then your graphics card software is managing the hardware acceleration. Please check with Nvidia whether there is an option to disable this. If there is, then once it is disabled, the hardware accelerations option will become active again.". Now, I don't pretend to be an expert in these matters, but I was under the impression that the hardware was enabled and managed by the drivers, and those drivers also offered out the functions of the card to other software that required it (API?), such as VS Pro when it needs access to the hardware acceleration to encode video. Graphics rendering on games works fine without me having to disable any graphics card software so why doesn't VS Pro?
For info, my hardware / OS is as follows:
Dual Xeon E5420 CPUs at 2.5Ghz (8 cores in total)
16GB RAM
EVGA nVidia GTX 660 Ti 3GB (with 310.61 beta drivers but still same issue with 306.97 release drivers)
240 GB Kingston SSD
Windows 7 64bit Ultimate with SP1
How to get hardware acceleration enabled using a GTX 600 series card? Or any other card that initially had the option greyed out?
I know that some people say that CPU rendering gives better quality, but I have a few hundred hours of old VHS and Video 8 tapes to transfer to digital and burn to DVD so as the quality isn't great to start with, I'm not too concerned about a few artifacts if I can significantly reduce the rendering time.
If I can't resolve this issue then I am going to claim a refund under Corel's 30 day money back guarantee as the product doesn't perform as advertised. However, I'd prefer to get it working as I quite like it.
View 14 Replies
View Related
Jun 13, 2012
I would like to be able to view my Library items in a list, rather than icons. I would like to be able to sort my Library items by name, or date taken. This would come in handy in many ways. For instance, if I have previously named my images properly (perhaps with a date format like IMG_2012_06_10), then I would be able to easily import series based on dates or names of files. If the library is smart enough, it might even be able to read the "date taken" property, then I could sort by that and insert into my timeline accordingly. Also, it would be nice to separate the samples that come with VS from my actual content. Perhaps these things are already possible, I don't know. I can't seem to figure it out, so maybe the GUI should offer more friendliness to laying out my libraries?
If there is already a list-view option with the sort feature in X5.
View 5 Replies
View Related
Feb 4, 2011
Is there a "Word Wrap" option in the title dialog? If I paste a lot of text, I have to insert manual line breaks. Is there a way around this?
View 8 Replies
View Related
Nov 1, 2010
how can i get the full hd 1080 option for youtube on vs3
i have a full 1080i camera and yet when i want to upload this hd version to you tube it only offers up to 720 in vs3
View 1 Replies
View Related
Oct 1, 2011
My NZ DMR-XW380 Panasonic DVD recorder will only read DIVX or XVID video files. My Corel Video Studio 12 has no option to save a clip as DIVX or XVID. I am able to save the clip and convert it with Oxelon, but can Video Studio 12 be set up to do this?
View 11 Replies
View Related
Oct 17, 2010
If I have two cameras pointing toward one subject (say someone being interviewed) what would be the best way to place the two video tracks in X3?
One I would be the main video track, but would the other have to be the over lay track? Is there an option to create a 2nd main video track that I could switch between? So when I am editing an interview clip I could pick between video track 1 or 2 and choose the angle I want?
View 8 Replies
View Related
Mar 6, 2011
Just downloaded a trial of VideoStudio X4, so far so good. However, is there an option inside the program to use Intel Quick Sync or does the program does detect and use it automatically when you encode with H264?
View 7 Replies
View Related
Dec 13, 2013
I imported a number of Powerpoint slides into VideoStudio Pro X6 and am now recording voice audio for them. My problem is: I don't know how to stretch each slide's duration to match its audio. By default, all the slides came in with a 3 sec duration. I can increase each to a max of 6 sec, but that's not long enough for my audio.
I've dug around the internet and watched tutorials on Corel's site, but they don't work. Everything I've looked at (even page 60 in the User's Guide for X5) says that to change a photo's duration, double-click it and select "Speed/Time-Lapse" on the Edit screen.
When I double-click a photo, there isn't a "Speed/Time-Lapse" option on my Edit screen (see image). So how am I supposed to change the slide's duration?
View 6 Replies
View Related
Feb 5, 2011
I have WMV 1080p30 source files that I am trying to render to an 5-6min MP4 HD file for upload to Youtube. I am able to make WMV HD files, but wanted to see if MP4 HD files would make a better final outcome on Youtube (Youtube seems to add a lot of jaggies to my WMV uploads). However, whenever I try to render anything to MP4 HD, VSX3 crashes (it never gets past the "Creating files" message). The windows error log states that the faulting modules are kernel32.dll and ntdll.dll. I have QT 7.6 (not the latest) installed. I have XSVX3 updated to SP2 (although the file downoaded was patch3.exe). In the Make Movie template and in Share/Custom , I don't get the option to see/manipulate any MP4 HD formats or even use H.264 compression. When I bring up Mpeg-4, it allows me to use mainly standard-def or non-HD resolutions and on-H.264 codecs. Is it not seeing the profiles/codecs for HD H.264 from Quicktime? Do I need QT Pro or just the free QT? I can render MP4 non-HD. As an aside, I see no sign that CUDA is being utilized.
View 1 Replies
View Related
Jan 5, 2012
I need to put an ALT + 0156 character (œ) but it does not work.
When I create one with Work and copy/paste, only the o appear.
View 4 Replies
View Related
Nov 7, 2012
I am unable to import a DVD into VSX5.
DVD Properties only show as 195 MB udf file system / It is not copyright protected .It plays OK in Power DVD and Windows Media Player and lasts about 5 minutes .It is a free promotional DVD.
To try and import it into VSX5 I go import file -insert media to library -insert digital media -select drive, -start- when I select or get near the small boxes in the top right of title I or chapter1 boxes with the cursor - the screen goes black and the PC reboots loosing any unsaved data..
If I try to do a screen capture of a paused DVD screen either via print screen-paste as new image, or the dedicated screen capture feature in Paint Shop Pro X- the captured screen area only shows black....
View 1 Replies
View Related
Feb 28, 2011
When I get to the step where one edits the main and sub menus, I am only given the option to RETURN. The NEXT button is missing. This problem appeared after I was forced to re-install VSX2 following a computer crash. I am now running it on Windows 7 Home Premium.
View 2 Replies
View Related
Jan 14, 2011
Installed VideoStudio for compatibility with Windows 7. Used mainly for editing out commercials fron television programmes recorded onto DVD. Both single use and re-recordable discs used. Everything worked well though the program is top-heavy for my requirement. Automatic suggestion last week that I install an update. The update failed and the problems started. I can no longer import from DVD. The process appears to run up to 60% then stops. The program then stops responding and has to be closed using task manager. The DVD can only be ejected by re-starting the computer. Tried removing VideoStudio using the clean-up tool and following the regedit instructions. Re-installed but no improvement. Suggested workround by Corel is to copy the vob file from the DVD to the desktop, rename this file as a mpg then import into VideoStudio. This does not work. So at the moment I have un-useable software.
View 6 Replies
View Related
Jul 23, 2013
Every time I try to add an image I get a message saying that there is a format mismatch (see screenshot). This is strange because when I first installed it, everything was working fine. This applies to the following image types JPG, JPEG, GIF, PNG, BMP. I have done some searching and confirmed that I am not the only one who has experienced this.
View 1 Replies
View Related
Oct 3, 2011
I have a project I'm trying to render to an mp4...I previously rendered 2 different versions of it, then after this morning when I re-edited and finished the project, it doesn't let me render an mp4.
If I try to render, it goes through the whole process and then I watch as the file disappears when rendering is complete. It let me render to an AVCHD file, but it won't let me render an mp4 from it. I tried uninstalling/reinstalling VS x4 and installing the SP but nothing works.
View 2 Replies
View Related
