DVD Properties only show as 195 MB udf file system / It is not copyright protected .It plays OK in Power DVD and Windows Media Player and lasts about 5 minutes .It is a free promotional DVD.
To try and import it into VSX5 I go import file -insert media to library -insert digital media -select drive, -start- when I select or get near the small boxes in the top right of title I or chapter1 boxes with the cursor - the screen goes black and the PC reboots loosing any unsaved data..
If I try to do a screen capture of a paused DVD screen either via print screen-paste as new image, or the dedicated screen capture feature in Paint Shop Pro X- the captured screen area only shows black....
I have a Samsung Captivate and it records video as .3GP files. I can't import this file to VideoStudio X3. I did the latest "Patch" and I'm running version 13.6.2.69. Shouldn't I be able to import these videos?
I have just installed VS X5 and when attempting to capture/import from my Panasonic HDC-TM 700 camcorder am unable to do so. I get two messages either "Use a display environment of 1024* 768 or more", or "There is no capture driver installed on this system". Neither of which make much sense.
I was previously using VS X4 with no problems importing. Should I assume that the necessary driver is on the DVD or do I need to download another driver. I have HD Writer AE installed.
I was still unable to import photos into Corel Videostudio Pro x4. I uninstalled it then went to reinstall it, but whenever I click on the install button on the menu, it just flickers for a bit.
I have downloaded few instant project templates Yet when I go to the Instant project window I do not see the import Icon . I only see the orange Icon(get more content). Is there something wrong with the installation of my VSPro x3.
I'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.
I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.
needed larger HD and did a clean install of windows 7 after doing a search of my original HD for all PSD/CR2 images> then doing the "drag drop" technique of copying/backing-up those images to another external and an internal HD.
Then did the instillation of that larger "C" HD and clean install of windows 7>copied those images into one newly created folder on that drive>installed CS6 and LR 4.1 and...LR can't/will not recognize and import more than 500 out of 14,000 PSD/CS2 images.
I am able to access those images via windows explorer and open them into CS6 without difficulity. I have done a couple un/reinstall of LR.Every one of those images is located within one folder and no images anywhere else on the "C" drive. I still have the original back-ups in two places. I have watched the videos on importing images.
I've got a fully updated version of Lightroom 3.6 and I haven't been able to import a single file in several months although I had no problems with Lightroom 3 (installed May 2011). I'm on a PC with Windows 7 (ver6.1).
When I try to import it says "the following files were not imported because they could not be read".
I'm importing jpg files and it fails if I try to import from: my camera (worked previously), my memory card reader, my hard drive, an external drive.
I've tried importing copies of photos Lightroom previously imported and recognized and new photos its never seen before. I've tried importing photos taken on my Canon Powershot SX100IS, my Nikon L120, and my cameraphone. It fails on everything with "the following files were not imported because they could not be read" error.
I am no longer able to import any type of file into Revit. It doesn't matter if it is a CAD file, Image file, or a new Family. When I click the import or load button the program appears to freeze and no dialog box appears. I can hit escape and its back to normal. I tried seeing if the dialog box was hidden behind all my open programs but I can't seem to locate it anywhere.
I was able to import .stp files in Maya 2010, but I just get an error message now in 2012. I must be doing something wrong but can't seem to figure out what the problem is. I looked for a plugin with no luck.
I heard many good things about Gimp so I downloaded it, eager to begin editing my photos. But for the last 30 minutes, I have been unable to even upload an image to begin editing. I've tried everything, but no matter what, my images will not "drag and drop" like they're supposed to. I am getting more and more frustrated by the second. I read it might be the fact that it's a "jpg" file,so I tried renaming it, as suggested, still, no luck! I'm using a Mac Os X 10.6.8
I am unable to import photos into Lightoom 4.4 on Macbook Pro running on Mountain Lion. I tired importing photos directly from the sdcard, both via the inbuild reader & and external USB reader. Import fails in both cases. I then tired copying the files to desktop, import fails with move option too. But when i use the add option, the import works fine.
When I try to import presets in LR3/Develop, the template files are not visible to select even though they are definitely listed where I stored them on my computer. I recently upgraded my computer and am now using Window 7 instead of Windows XP. Neither new downloads nor old downloads are visible. Why doesn't LR recognize them? Does 64-bit vs 32-bit make a difference?
I have just installed LR3 on my new computer and is unable to upload my photographs. I have change permissions as suggested in other forums, it recognises my Nikon D3 and shows the pictures but when I try to import I get the following message "the following files were not imported because they could not be read" I have LR3 on my laptop and it works fine.
I recently purchased Lightroom 5 and have updated to 5.2. I did my first import from a file folder to the catologue. I noticed that all my .awr files imported and any edited .jpg imported, but the original .jpg would not import if there was a corresponding .awr file. I'm not sure how to fix this. I would like all my photos imported.
I am unable to import NEF files into the new Lightroom 5.3, I recieve the following error message: "The files are not recognized by the raw format support in Lightroom. (251)" and then each .NEF file is listed separately. I am using the latest and most updated Lightroom software and a Nikon 3300. I get this message if I try to import directly from the SD card or if I try to import from the desktop (after copying the SD card contents onto my desktop). I also am unable to import directly from the camera. I'm using a promaster performance 32GG SD card that I formated in the Nikon 3300 before I started shooting. I took three pictures that were just JPGs on the card and these improt okay using any mechanism. All the other photos were taking RAW+JPG.
I am trying to upload my pictures into lightroom5 and it won't upload my files.. I keep getting this.. "The following files were not imported because they can't be read.. I just got lightroom a few days ago and it was working fine......
I have been unable to import images into Lightroom 5.2 and 5.3 for the past several days. Worked fine before. There have been similar discussions on this topic, but none identical. When I try to import from a cf card, no images show up to import. In the import dialog, if I click on other source and navigate through directories on my hdd, all the images are greyed out. This is true even for images that are not in my catalog. I have tried creating a brand new catalog with the same results on import. I have deleted all the preferences files. I upgraded from 5.2 to 5.3 and that did not fix the problem. I do not have the original dmg for Lightroom so am unable to try a complete re-installation.
I am trying to import photos from my compact flash disc (which I use in my camera) to Lightroom3 on my Mac. The files are .jpg files. The message that I get is that the files cannot be read. But I am able to import them to iPhoto, Photoshop Elements on my PC, etc. I contacted support and chatted with three different people. I uninstalled Lightroom 3.6 and re-installed 3.5 - that didn't work. So the next guy had me re-install 3.6 and update the Camera RAW version to 6.6, that didn't work.
I am suddenly unable to import my images using LR4. Each night I download my cards using a card reader using LR4. I use a card reader and copy and convert to DNG. Suddenly tonight I keep getting a message that my files were not copied because they can't be read. I have tried using multiple cards, have used different readers. None of it makes a difference. I simply can't move my images off my cards anymore.
The only thing different I did yesterday, and I'm not sure if it made a difference, was to create a new destination folder by right clicking on my list on the right of the screen. I did two different sessions yesterday and I wanted the images in different folders. I right clicked on the folder from my first download, select create a new folder, and imported there. Those images downloaded but I can't do anymore.
I have no clue where to start in troubleshooting this. I thought it was the card, but none of my cards work. I thought it was the card reader, but my brand new one won't work.I am thinking it is something within LR.
When importing I use the "Copy as DNG" feature and that works just fine for the RAW impages.
I then switch to the "Copy" feature to copy some JPG imsages taken with another camera and they are not copied. The information in the window is "Cound not copy a file to the requested location" and lists all files I tried to import. If I copy the files manually into the folders/locations that Lightroom should have done, the "Add" fearire works just fine.
I am just puzzled as to why Lightroom cannot copy the files to the folders that are there and add the image to the catalog on its own. Converting RAW to DNG works fine so what needs to be done to allow Copy to do the same thing.
I executed Edit in Storm Sewers to work on the Pipe Network in Civil 3D. I made some changes in Storm Sewers, now I want to Import back to Civil 3D.
Nothing is happening in Civil 3D when I try to Import with either of the choices, picking Overwrite or to Create a new pipe network. I am not sure what I am doing wrong.
I have attached the drawing file and the STM file.
I have this dwg that i've imported into a part sketch. All except one layer won't come it. So i have made a dwg with only the culprit layer, see attached. Why nothing gets imported into a inventor 2012 sketch.
BTW all layer from my main dwg file gets imported into on single layer even tho i'm not using the option to do that. It is not a big deal compared to that layer not being imported.
try to import it and let me know if it works, my autocad and inventor are patched SP1
I am unable to import this planter box i created into the project I am working with. I have attached the planter box family file (rfa) I am working on and and a screen shot image (jpeg) of the planter box once it's imported into a project. I used another planter box template to create my family. Perhaps the file path is not set up correctly. Insert this family file into a project file.
I have tried to import a DWG-file to my drawing. But it does not work. The XREF-file just appears as dots on the screen. The DWG-file I try to import has another UCS. Is that the problem?
I can do it the opposite way, import the file with the normal World-UCS into the file the different UCS.
I'm trying to import/ open IFC files to Revit, I have 6 diffrent IFC files but when I try to open/import in revit, nothing happens, not even an error message.
