VideoStudio :: Unable To Import From Camcorder
Feb 8, 2013
I have just installed VS X5 and when attempting to capture/import from my Panasonic HDC-TM 700 camcorder am unable to do so. I get two messages either "Use a display environment of 1024* 768 or more", or "There is no capture driver installed on this system". Neither of which make much sense.
I was previously using VS X4 with no problems importing. Should I assume that the necessary driver is on the DVD or do I need to download another driver. I have HD Writer AE installed.
View 14 Replies
ADVERTISEMENT
Aug 30, 2011
It has been a while since I have used VS Pro x3 and am just starting a new project but when I go to capture footage the only options I am getting are as per the attached screenshot,
Avermedia 7231 Analog Capture/DVBT Tuner Digital TV Source or HDV Source screenshot.gif (1.18 KiB) Viewed 105 times
View 4 Replies
View Related
Jan 16, 2011
I usually download my DV tape from the Panasonic analog camcorder to my JVC DVD recorder. However, I wanted to try downloading from the cam to the PC. I connected the cam to the PC and started VS Pro X3. When I click on "source" I get the message: No video device driver installed or device is not connected. The device (cam) is connected and the 1394 port is wrong properly. Then the video driver is needed. Where do I get this from-do I need to reinstall VS?
View 8 Replies
View Related
Nov 26, 2012
I have used old tape type camcorder (sony) for 7 years and used firewire cable(1394) to capture the video into my desktop. capturing file format was AVI(DV type 1). It's pretty big size of files but I like this type of file format because there were no compression so that I can keep an uncompressed original DV files. When I captured(download) the video from camcorder, I usually turn power on the camcorder after connect into desktop, then VideoStudio automatically recognized my old SONY camcorder so it's always ready to capture the videos.
BTW, I purchased new HD camcorder (JVC, model jvc gz-e10). I did connect same what I did tape camcorder, but neither my computer nor VSX5 can't recognized to capture. (It just only detect as movable device, i.e. SD card...)
How to capture this video clip from HD camcorder using VideoStudio program? Inside of SD card, captured files have "mts" file extension.
View 7 Replies
View Related
Mar 24, 2011
I have been using VS for quite a few years firstly with VS6 and currently have X3 (depending on a few things I will probably upgrade to X4).
Up until the present time I have been capturing on my PC at home via fire-wire from my current camcorder (Canon MD 235 which of course uses mini DV) . I want to purchase a new laptop to give me some mobility and also be able to edit produce DVD's on the move, looking around virtually no current laptops (unless I go well beyond my budget (around £500)) have fire-wire or even an express port to use a expansion card with fire-wire.
I realize that I will probably have to step up and get a newer more up to date camcorder over the summer and what I am trying to understand is the difference in capture formats. I like the look of some of the low end Hard drive/flash/SD card camcorders around, but how do you import to PC, is all done by USB?
In what formats is the video imported and how easy in comparison to say Avi files and is it easy to edit video using VS and produce a DVD from the resulting files?
View 2 Replies
View Related
Nov 3, 2011
I am using Video Studio x2 and I am trying to edit video from my HD camcorder. The video that I am trying to edit is in MPEG4 format and at a rate of 30fps at 1280x720. I have tried to change the properties within Videostudio but when I try to watch it or do anything else, the programme crashes and I have to start again. In the past I have to down grade the format to DVD, and then it works, but at a cost. Does VSx2 support this format or do I have to upgrade the programme to support HD editing? I am using a Laptop with a intel core 2 prossessor and a 1024mb Nvidia Geforce graphic card, which I feel should be enough.
View 7 Replies
View Related
Jul 19, 2012
I currently have a Sony HDR-CX160 camcorder, which does not have a firewire port. I also have a 3 month Dell XPS8500, which does not have a firewire port. I am running Windows 7 64bit. When I hook up my camcorder via USB, Windows DOES recoginize it. It is not recognized by Corel, not in the Capture Video, Import form Digital Media,, Import from Mobile Device or Stop Motion. (my webcam does show up) It does not show up in the pull down tree. I understand that you can use Windows Movie Maker, or the supplied Sony PMB software to download it, but I paid for Corel to be able to do this. Why I would like Corel to be able to do this is that you need a"live" camera to be able to use the Stop Motion Capture, not something that has been recorded before.
View 7 Replies
View Related
Jul 11, 2007
I just purchased an Aiptek GO-HD hi-def camcorder that outputs movies in 16:9 1280x720 H.264 MOV files. I can't seem to get these to work with VS10 or VS11. It either locks up when rendering to a DVD (VS10), or the DVD that it makes has extremely choppy video and audio and is unusable (VS11).
[URL]
View 10 Replies
View Related
May 21, 2012
Following Lesson steps in the Marc Bech book (Picture Yourself) Lesson in Stop Motion.When I go to 'CAPTURE' > 'STOP MOTION', I get the message "No Camcorder Device is Available"
The camcorder is a Panasonic HDC-SDT750 and it connects to my computer without problem and is recognised by Windows (7) MY Computer is a Hewlett Packard S5206, Windows 7 64 bit.
I am using VSX5 and have downloaded the latest version of Hewlett Packard's video drivers and the latest version of Direct X.
View 6 Replies
View Related
Feb 15, 2013
MPEG video captured from a tape based camcorder in premiere cs5 will not import into lightroom 4.3. Why, when it is created in an adobe product?
View 15 Replies
View Related
Oct 25, 2012
My laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
View 5 Replies
View Related
Apr 1, 2013
When I try to capture a video from camcorder-(HI 8 Tape) it starts to copy the stops and says tape is copy protected. Then program freezes. It worked last week and this is since svc pak 2 today.
View 4 Replies
View Related
Nov 27, 2010
If Video studio x2 or x3 is capable of editing video captured with this camcorder and is it a difficult process to transfer video into video studio ?
View 2 Replies
View Related
Jul 22, 2011
Using VideoStudio X4. After initial problems with installation it has now installed fine and is working well. However, when capturing video from my Panasonic NV-GS400 mini dv camcorder the film does not show in the preview window. It did at first but now does not preview. I have not changed any settings nor have I changed anything in my method of capture. The film does capture ok - capture in avi format - its just a little unsettling not being able to see it during capture. I watch it on the pull out screen of the camcorder so I can tell when to stop capture etc.
Also, when capturing, the film runs for a few seconds then stops and then starts again and the capture begins from the second start point. I never had the problem with Ulead 9 but did have it with ProX2 but wondered if that was just a glitch because I was running it on Windows 7 and it had not originally been developed for that. Apart from that the program works well even when rendering HD footage from my new Panasonic HDC-TM700.
View 13 Replies
View Related
Nov 7, 2012
I am unable to import a DVD into VSX5.
DVD Properties only show as 195 MB udf file system / It is not copyright protected .It plays OK in Power DVD and Windows Media Player and lasts about 5 minutes .It is a free promotional DVD.
To try and import it into VSX5 I go import file -insert media to library -insert digital media -select drive, -start- when I select or get near the small boxes in the top right of title I or chapter1 boxes with the cursor - the screen goes black and the PC reboots loosing any unsaved data..
If I try to do a screen capture of a paused DVD screen either via print screen-paste as new image, or the dedicated screen capture feature in Paint Shop Pro X- the captured screen area only shows black....
View 1 Replies
View Related
Feb 2, 2011
I have a Samsung Captivate and it records video as .3GP files. I can't import this file to VideoStudio X3. I did the latest "Patch" and I'm running version 13.6.2.69. Shouldn't I be able to import these videos?
View 12 Replies
View Related
Apr 26, 2013
I was still unable to import photos into Corel Videostudio Pro x4. I uninstalled it then went to reinstall it, but whenever I click on the install button on the menu, it just flickers for a bit.
View 1 Replies
View Related
Apr 23, 2011
I have downloaded few instant project templates Yet when I go to the Instant project window I do not see the import Icon . I only see the orange Icon(get more content). Is there something wrong with the installation of my VSPro x3.
View 1 Replies
View Related
Nov 20, 2010
I'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.
I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.
View 9 Replies
View Related
May 22, 2012
Trying to process MTS outputs from my Canon Camcorder. Files run in WMV and Windows Live Movie Maker (needs to wait while the files are uncompressed). WHen opened if PS CS6 files is present. When playing, frame rates drop to as slow as 3 fps. I have a quad processor and as I have indicated, the files play at normal speed. Have tried saving but have seen that the saved file is also dropping frames.
View 10 Replies
View Related
Jul 13, 2012
needed larger HD and did a clean install of windows 7 after doing a search of my original HD for all PSD/CR2 images> then doing the "drag drop" technique of copying/backing-up those images to another external and an internal HD.
Then did the instillation of that larger "C" HD and clean install of windows 7>copied those images into one newly created folder on that drive>installed CS6 and LR 4.1 and...LR can't/will not recognize and import more than 500 out of 14,000 PSD/CS2 images.
I am able to access those images via windows explorer and open them into CS6 without difficulity. I have done a couple un/reinstall of LR.Every one of those images is located within one folder and no images anywhere else on the "C" drive. I still have the original back-ups in two places. I have watched the videos on importing images.
View 5 Replies
View Related
Oct 10, 2012
LR4 locks up when trying to import, or use file, edit, library, etc tabs.
View 1 Replies
View Related
Jan 15, 2012
I've got a fully updated version of Lightroom 3.6 and I haven't been able to import a single file in several months although I had no problems with Lightroom 3 (installed May 2011). I'm on a PC with Windows 7 (ver6.1).
When I try to import it says "the following files were not imported because they could not be read".
I'm importing jpg files and it fails if I try to import from: my camera (worked previously), my memory card reader, my hard drive, an external drive.
I've tried importing copies of photos Lightroom previously imported and recognized and new photos its never seen before. I've tried importing photos taken on my Canon Powershot SX100IS, my Nikon L120, and my cameraphone. It fails on everything with "the following files were not imported because they could not be read" error.
View 5 Replies
View Related
Sep 9, 2013
I am no longer able to import any type of file into Revit. It doesn't matter if it is a CAD file, Image file, or a new Family. When I click the import or load button the program appears to freeze and no dialog box appears. I can hit escape and its back to normal. I tried seeing if the dialog box was hidden behind all my open programs but I can't seem to locate it anywhere.
View 1 Replies
View Related
Nov 29, 2012
I was able to import .stp files in Maya 2010, but I just get an error message now in 2012. I must be doing something wrong but can't seem to figure out what the problem is. I looked for a plugin with no luck.
View 3 Replies
View Related
Mar 30, 2012
I heard many good things about Gimp so I downloaded it, eager to begin editing my photos. But for the last 30 minutes, I have been unable to even upload an image to begin editing. I've tried everything, but no matter what, my images will not "drag and drop" like they're supposed to. I am getting more and more frustrated by the second. I read it might be the fact that it's a "jpg" file,so I tried renaming it, as suggested, still, no luck! I'm using a Mac Os X 10.6.8
View 1 Replies
View Related
Jun 7, 2013
I am unable to import photos into Lightoom 4.4 on Macbook Pro running on Mountain Lion. I tired importing photos directly from the sdcard, both via the inbuild reader & and external USB reader. Import fails in both cases. I then tired copying the files to desktop, import fails with move option too. But when i use the add option, the import works fine.
View 5 Replies
View Related
Mar 1, 2012
When I try to import presets in LR3/Develop, the template files are not visible to select even though they are definitely listed where I stored them on my computer. I recently upgraded my computer and am now using Window 7 instead of Windows XP. Neither new downloads nor old downloads are visible. Why doesn't LR recognize them? Does 64-bit vs 32-bit make a difference?
View 2 Replies
View Related
Jan 30, 2012
I have just installed LR3 on my new computer and is unable to upload my photographs. I have change permissions as suggested in other forums, it recognises my Nikon D3 and shows the pictures but when I try to import I get the following message "the following files were not imported because they could not be read" I have LR3 on my laptop and it works fine.
View 6 Replies
View Related
Nov 7, 2013
I recently purchased Lightroom 5 and have updated to 5.2. I did my first import from a file folder to the catologue. I noticed that all my .awr files imported and any edited .jpg imported, but the original .jpg would not import if there was a corresponding .awr file. I'm not sure how to fix this. I would like all my photos imported.
View 2 Replies
View Related
Dec 27, 2013
I am having trouble importing .CR2 files into lightroom 3.
View 5 Replies
View Related
