VideoStudio :: Camcorder Not Recognized
Jan 16, 2011
I usually download my DV tape from the Panasonic analog camcorder to my JVC DVD recorder. However, I wanted to try downloading from the cam to the PC. I connected the cam to the PC and started VS Pro X3. When I click on "source" I get the message: No video device driver installed or device is not connected. The device (cam) is connected and the 1394 port is wrong properly. Then the video driver is needed. Where do I get this from-do I need to reinstall VS?
View 8 Replies
ADVERTISEMENT
Jul 19, 2012
I currently have a Sony HDR-CX160 camcorder, which does not have a firewire port. I also have a 3 month Dell XPS8500, which does not have a firewire port. I am running Windows 7 64bit. When I hook up my camcorder via USB, Windows DOES recoginize it. It is not recognized by Corel, not in the Capture Video, Import form Digital Media,, Import from Mobile Device or Stop Motion. (my webcam does show up) It does not show up in the pull down tree. I understand that you can use Windows Movie Maker, or the supplied Sony PMB software to download it, but I paid for Corel to be able to do this. Why I would like Corel to be able to do this is that you need a"live" camera to be able to use the Stop Motion Capture, not something that has been recorded before.
View 7 Replies
View Related
May 21, 2012
Following Lesson steps in the Marc Bech book (Picture Yourself) Lesson in Stop Motion.When I go to 'CAPTURE' > 'STOP MOTION', I get the message "No Camcorder Device is Available"
The camcorder is a Panasonic HDC-SDT750 and it connects to my computer without problem and is recognised by Windows (7) MY Computer is a Hewlett Packard S5206, Windows 7 64 bit.
I am using VSX5 and have downloaded the latest version of Hewlett Packard's video drivers and the latest version of Direct X.
View 6 Replies
View Related
Oct 25, 2012
My laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
View 5 Replies
View Related
Aug 30, 2011
It has been a while since I have used VS Pro x3 and am just starting a new project but when I go to capture footage the only options I am getting are as per the attached screenshot,
Avermedia 7231 Analog Capture/DVBT Tuner Digital TV Source or HDV Source screenshot.gif (1.18 KiB) Viewed 105 times
View 4 Replies
View Related
Nov 26, 2012
I have used old tape type camcorder (sony) for 7 years and used firewire cable(1394) to capture the video into my desktop. capturing file format was AVI(DV type 1). It's pretty big size of files but I like this type of file format because there were no compression so that I can keep an uncompressed original DV files. When I captured(download) the video from camcorder, I usually turn power on the camcorder after connect into desktop, then VideoStudio automatically recognized my old SONY camcorder so it's always ready to capture the videos.
BTW, I purchased new HD camcorder (JVC, model jvc gz-e10). I did connect same what I did tape camcorder, but neither my computer nor VSX5 can't recognized to capture. (It just only detect as movable device, i.e. SD card...)
How to capture this video clip from HD camcorder using VideoStudio program? Inside of SD card, captured files have "mts" file extension.
View 7 Replies
View Related
Mar 24, 2011
I have been using VS for quite a few years firstly with VS6 and currently have X3 (depending on a few things I will probably upgrade to X4).
Up until the present time I have been capturing on my PC at home via fire-wire from my current camcorder (Canon MD 235 which of course uses mini DV) . I want to purchase a new laptop to give me some mobility and also be able to edit produce DVD's on the move, looking around virtually no current laptops (unless I go well beyond my budget (around £500)) have fire-wire or even an express port to use a expansion card with fire-wire.
I realize that I will probably have to step up and get a newer more up to date camcorder over the summer and what I am trying to understand is the difference in capture formats. I like the look of some of the low end Hard drive/flash/SD card camcorders around, but how do you import to PC, is all done by USB?
In what formats is the video imported and how easy in comparison to say Avi files and is it easy to edit video using VS and produce a DVD from the resulting files?
View 2 Replies
View Related
Nov 3, 2011
I am using Video Studio x2 and I am trying to edit video from my HD camcorder. The video that I am trying to edit is in MPEG4 format and at a rate of 30fps at 1280x720. I have tried to change the properties within Videostudio but when I try to watch it or do anything else, the programme crashes and I have to start again. In the past I have to down grade the format to DVD, and then it works, but at a cost. Does VSx2 support this format or do I have to upgrade the programme to support HD editing? I am using a Laptop with a intel core 2 prossessor and a 1024mb Nvidia Geforce graphic card, which I feel should be enough.
View 7 Replies
View Related
Feb 8, 2013
I have just installed VS X5 and when attempting to capture/import from my Panasonic HDC-TM 700 camcorder am unable to do so. I get two messages either "Use a display environment of 1024* 768 or more", or "There is no capture driver installed on this system". Neither of which make much sense.
I was previously using VS X4 with no problems importing. Should I assume that the necessary driver is on the DVD or do I need to download another driver. I have HD Writer AE installed.
View 14 Replies
View Related
Jul 11, 2007
I just purchased an Aiptek GO-HD hi-def camcorder that outputs movies in 16:9 1280x720 H.264 MOV files. I can't seem to get these to work with VS10 or VS11. It either locks up when rendering to a DVD (VS10), or the DVD that it makes has extremely choppy video and audio and is unusable (VS11).
[URL]
View 10 Replies
View Related
Apr 1, 2013
When I try to capture a video from camcorder-(HI 8 Tape) it starts to copy the stops and says tape is copy protected. Then program freezes. It worked last week and this is since svc pak 2 today.
View 4 Replies
View Related
Nov 27, 2010
If Video studio x2 or x3 is capable of editing video captured with this camcorder and is it a difficult process to transfer video into video studio ?
View 2 Replies
View Related
Jul 22, 2011
Using VideoStudio X4. After initial problems with installation it has now installed fine and is working well. However, when capturing video from my Panasonic NV-GS400 mini dv camcorder the film does not show in the preview window. It did at first but now does not preview. I have not changed any settings nor have I changed anything in my method of capture. The film does capture ok - capture in avi format - its just a little unsettling not being able to see it during capture. I watch it on the pull out screen of the camcorder so I can tell when to stop capture etc.
Also, when capturing, the film runs for a few seconds then stops and then starts again and the capture begins from the second start point. I never had the problem with Ulead 9 but did have it with ProX2 but wondered if that was just a glitch because I was running it on Windows 7 and it had not originally been developed for that. Apart from that the program works well even when rendering HD footage from my new Panasonic HDC-TM700.
View 13 Replies
View Related
Apr 18, 2011
I am using the trial version of vx4. All is ok until I go to the create dvd page. The burner drive has no device listed. Create to disc is shaded out. I am able to burn discs with other programs.
View 5 Replies
View Related
Apr 4, 2012
On my trial version of ProX5, when I went to use the DVD label burn feature, I complete the label, when it asks me to save it I do with a file name but my new text and image aren't saved when I look at it again within the project and after I save the DVD label it shows as a .UPL file that Windows 7 does not recognize.
View 2 Replies
View Related
May 11, 2011
The 720p avi files on my toshiba camileo s20 are not recognized by my VS pro x2. VS will not capture them either from the camera or from the sd card. It does recognize the files on the sd card and shows a thumbnail, but when I try to capture them it says it cannot do so.
I can capture the files using windows 7 moviemaker but the avi files are still not recognized by vs even though windows movie maker has no trouble with them and treats them like any avi file. I have made a dvd with windows mm using those files.
VS does handle sd avi files from my JVC camcorder but no joy with the Toshiba. I have both the 1 and 2 updates for vs x2.
View 8 Replies
View Related
May 22, 2012
Trying to process MTS outputs from my Canon Camcorder. Files run in WMV and Windows Live Movie Maker (needs to wait while the files are uncompressed). WHen opened if PS CS6 files is present. When playing, frame rates drop to as slow as 3 fps. I have a quad processor and as I have indicated, the files play at normal speed. Have tried saving but have seen that the saved file is also dropping frames.
View 10 Replies
View Related
Feb 15, 2013
MPEG video captured from a tape based camcorder in premiere cs5 will not import into lightroom 4.3. Why, when it is created in an adobe product?
View 15 Replies
View Related
Jul 11, 2013
I am working in Photoshop 8 and I did 4 different files and saved them. Then my computer locked up and now photoshop is telling me that those files are not the right type of file to be opened in photoshop. What can I do? I am working on a large project!
View 2 Replies
View Related
Sep 3, 2013
All of a sudden, when I try to print from Photoshop CS6, I get a message that says my printer is not online. If I load the photo to another program I have no problem printing.
My grandson was using my Photoshop and may have changed some setting, but which settings!
View 1 Replies
View Related
Aug 12, 2012
Having issues opening Canon T2i .CR2 raw files with my MacBook Pro & Photoshop CS3. Will an uninstall and reinstall solve it or do I need to UPGRADE? Also, don't have original CS3 disc on hand. Online uninstall and reinstall?
View 2 Replies
View Related
Jan 17, 2013
Since yesterday, I have a big issue with my autocad LT: when I click on an object, it doesn't show me on which layer it is and I can't change it's layer neither...Usually, it shows the layer matching to your object but not anymore...
Also, the "delete" touch on my keybord doesn't allow me to delete anything...(but I checked and the keyboard is not broken..
View 3 Replies
View Related
Dec 31, 2008
I recovered some 600 jpg files inadvertently erased from a flash card, but they all have the extension THM. Since THM is not recognized by PS CS3 nor by Bridge, I can't Batch Rename them to show jpg extensions. It will take me 2-3 hours to rename them one-by-one.
View 33 Replies
View Related
Apr 24, 2012
Just installed 2013 and customised my own hotkeys when found the delete button doesn't respond.
Even in Customise UI, I cannot get the "Delete" to appear in the Hotkey field to assign the correct action. I have had to assign "Home" (which on my keyboard is directly above the Delete button) just so I can have the ability to delete objects without having to resort to the Edit>Delete menu.
View 1 Replies
View Related
Dec 16, 2013
I have a problem with 2.8 JPG and PNG files.
I have a Brother MFC-J835DW inkjet printer with an SD slot to read files to print. It will NOT read any JPG or PNG file created with Gimp 2.8.x. The thumbnails show up as a square with a "?" on it. I have 2.8.10 on a Win7 desktop and 2.8.4 on a Linux machine. My Win7 laptop has 2.6.11 and those files work fine. The win7 desktop had 2.6.11 before the (up?)grade and those files were fine too. The Linux machine had 2.6.x at one time and those files also worked fine.
View 9 Replies
View Related
Feb 19, 2013
When opening an CS6 Illustrator file, certain fonts are not recognized – any pointers? Font Book confirms the fonts are "installed" with no compat issues. Wondering why CS6 doesn't see/sniff out the fonts.
View 6 Replies
View Related
Sep 20, 2013
I use LR5 and downloaded LR5.2 but when I try to open it I get the message "File not recognised".
View 2 Replies
View Related
Nov 11, 2012
I am trying to upgrade gtom LR 1.0 version to 4.1 version and my catlog is not being recognized for upgrade. I launch LR, select my NAME.IRCAT catlog and get this message: " The Ligghtroom catalog named "Lightroom Catalog" cannot be opneded because it is not valid. Would you like to select a different catalog?"
I wonder if need to upgrade to some lower version befor moving to 4.1. I have not upgraded in many years, actually I never upgraded since I first purchased LR. I finally purchased a new PC and upgraded my OS, and consequently decided to upgrade all my most important SW.
View 4 Replies
View Related
Jun 26, 2013
Shooting with a Canon 5dMarkii. Windows 7; Photoshop CS3. When I try to open RAW (CR2) files, I get a message that the file type can't be recognized. I've not had this problem before. My "updates" says that everything is current.
View 3 Replies
View Related
Apr 2, 2012
I downloaded a copy of Photoshop CS5.1 to try with my Sony NEX-5N. When I try to open a RAW file, I get a message that the camera type isn't supported. The Adobe website indicates that the Sony NEX-5N is supported. How do I get the trial version of Photoshop to recognize the RAW files from the Sony NEX-5N?
View 1 Replies
View Related
Oct 9, 2012
I'm having problems with Silver Efex Pro 2 after upgrading to PS CS6, worked fine in older versions of PS..Downloaded the latest installer from Nik Software..The installer only find my Lightroom 4.1 when installing, and I have to add CS6 manually (locating the plugin folder, also tried other folders).It works fine in LR4.1, but in PS, the software opens, I apply changes, and clik OK, NIK closes, but nothing happens to my image. The history tab says "Silver Efex Pro 2", but no layers/changes to the original image..64bits WIN7 Enterprise, 12GB ram
View 1 Replies
View Related
