When I try to capture a video from camcorder-(HI 8 Tape) it starts to copy the stops and says tape is copy protected. Then program freezes. It worked last week and this is since svc pak 2 today.
View 4 RepliesI currently have a Sony HDR-CX160 camcorder, which does not have a firewire port. I also have a 3 month Dell XPS8500, which does not have a firewire port. I am running Windows 7 64bit. When I hook up my camcorder via USB, Windows DOES recoginize it. It is not recognized by Corel, not in the Capture Video, Import form Digital Media,, Import from Mobile Device or Stop Motion. (my webcam does show up) It does not show up in the pull down tree. I understand that you can use Windows Movie Maker, or the supplied Sony PMB software to download it, but I paid for Corel to be able to do this. Why I would like Corel to be able to do this is that you need a"live" camera to be able to use the Stop Motion Capture, not something that has been recorded before.
View 7 Replies View RelatedI want to capture from mini DV tape, but my current software (not Corel!) requires me to use Firewire. However. my computer only has USB ports. Will Video Studio capture using USB (or do I need to buy a new computer?) My camera has both USB and Firewire outlets.
View 10 Replies View RelatedMPEG video captured from a tape based camcorder in premiere cs5 will not import into lightroom 4.3. Why, when it is created in an adobe product?
View 15 Replies View RelatedI recently started using OSX. Using CS6 Premier Pro on OSX Mavericks.I'm capturing DV tape from a Canon GL2.Both "Scene Detect" and "Tape" options selected.
Two problems:
1. Capture drops out at the first frame of video. I press record a second time and it proceeds to capture the rest of the tape. It almost looks like Premier is trying to determine the aspect ration of the material as the preview window appears to switch between 4:3 and 16:9.
2. Scene Detect is off by a frame or two (not sure exactly how many). So basically the end of the shot has a frame or two of the next shot.
It has been a while since I have used VS Pro x3 and am just starting a new project but when I go to capture footage the only options I am getting are as per the attached screenshot,
Avermedia 7231 Analog Capture/DVBT Tuner Digital TV Source or HDV Source screenshot.gif (1.18 KiB) Viewed 105 times
I usually download my DV tape from the Panasonic analog camcorder to my JVC DVD recorder. However, I wanted to try downloading from the cam to the PC. I connected the cam to the PC and started VS Pro X3. When I click on "source" I get the message: No video device driver installed or device is not connected. The device (cam) is connected and the 1394 port is wrong properly. Then the video driver is needed. Where do I get this from-do I need to reinstall VS?
View 8 Replies View RelatedI have used old tape type camcorder (sony) for 7 years and used firewire cable(1394) to capture the video into my desktop. capturing file format was AVI(DV type 1). It's pretty big size of files but I like this type of file format because there were no compression so that I can keep an uncompressed original DV files. When I captured(download) the video from camcorder, I usually turn power on the camcorder after connect into desktop, then VideoStudio automatically recognized my old SONY camcorder so it's always ready to capture the videos.
BTW, I purchased new HD camcorder (JVC, model jvc gz-e10). I did connect same what I did tape camcorder, but neither my computer nor VSX5 can't recognized to capture. (It just only detect as movable device, i.e. SD card...)
How to capture this video clip from HD camcorder using VideoStudio program? Inside of SD card, captured files have "mts" file extension.
I have been using VS for quite a few years firstly with VS6 and currently have X3 (depending on a few things I will probably upgrade to X4).
Up until the present time I have been capturing on my PC at home via fire-wire from my current camcorder (Canon MD 235 which of course uses mini DV) . I want to purchase a new laptop to give me some mobility and also be able to edit produce DVD's on the move, looking around virtually no current laptops (unless I go well beyond my budget (around £500)) have fire-wire or even an express port to use a expansion card with fire-wire.
I realize that I will probably have to step up and get a newer more up to date camcorder over the summer and what I am trying to understand is the difference in capture formats. I like the look of some of the low end Hard drive/flash/SD card camcorders around, but how do you import to PC, is all done by USB?
In what formats is the video imported and how easy in comparison to say Avi files and is it easy to edit video using VS and produce a DVD from the resulting files?
I am using Video Studio x2 and I am trying to edit video from my HD camcorder. The video that I am trying to edit is in MPEG4 format and at a rate of 30fps at 1280x720. I have tried to change the properties within Videostudio but when I try to watch it or do anything else, the programme crashes and I have to start again. In the past I have to down grade the format to DVD, and then it works, but at a cost. Does VSx2 support this format or do I have to upgrade the programme to support HD editing? I am using a Laptop with a intel core 2 prossessor and a 1024mb Nvidia Geforce graphic card, which I feel should be enough.
View 7 Replies View RelatedI have just installed VS X5 and when attempting to capture/import from my Panasonic HDC-TM 700 camcorder am unable to do so. I get two messages either "Use a display environment of 1024* 768 or more", or "There is no capture driver installed on this system". Neither of which make much sense.
I was previously using VS X4 with no problems importing. Should I assume that the necessary driver is on the DVD or do I need to download another driver. I have HD Writer AE installed.
I just purchased an Aiptek GO-HD hi-def camcorder that outputs movies in 16:9 1280x720 H.264 MOV files. I can't seem to get these to work with VS10 or VS11. It either locks up when rendering to a DVD (VS10), or the DVD that it makes has extremely choppy video and audio and is unusable (VS11).
[URL]
Following Lesson steps in the Marc Bech book (Picture Yourself) Lesson in Stop Motion.When I go to 'CAPTURE' > 'STOP MOTION', I get the message "No Camcorder Device is Available"
The camcorder is a Panasonic HDC-SDT750 and it connects to my computer without problem and is recognised by Windows (7) MY Computer is a Hewlett Packard S5206, Windows 7 64 bit.
I am using VSX5 and have downloaded the latest version of Hewlett Packard's video drivers and the latest version of Direct X.
how to make a scotch tape effect, but what i'm looking for is creating duct tape (usually "silver" or brown) and/or masking tape (usually white or off-white). what do you suggest (ie what textures to use, any other layer styles, etc)?
View 3 Replies View RelatedHow many times can an HDV Mini Cassette be used? Does footage quality go down as you re-record? Is it best to color bar the entire tape before recording onto it?
View 4 Replies View RelatedOriginally was using Vs10 when most of my discs would only get to 58% and go no further, threw away many discs thinking they were the problem. Have now upgraded to VS11.
The solution is to get hold of a small (free) utility called FixVTS from here: [URL]
My laptop Dell Latitude E5420 is not recognising my camcorder. I tried with two of my mini DV camcorders, both of them are not recognised. When I connect through the IEEE1394 port on the laptop, it doesn't respond at all. In UL VS or any other video capture programs, the camcorder is not recognised, but only my laptop built in web camera is recognised.
Tried with changing IEEEE1394 host controller with Legacy in the Device Manager, but doesn't work.
If Video studio x2 or x3 is capable of editing video captured with this camcorder and is it a difficult process to transfer video into video studio ?
View 2 Replies View RelatedAm converting a VHS tape to DVD. So captured successfully (albeit with an EzCap device). Produced a fairly good quality AVI file and with no editing at all, used VS x2 to produce my mpeg compatible file.
Details of that file are here:
File Format: PAL DVD
File Size: 4,514,938 KB
Duration: 6056.920 Secs
Video Type: MPEG 2 Video, Lower Field First
Totoal Frames: 151,173 frames
Attributes: 24 bits 720 x 576, 16:9
Frame Rate: 25.000 frame/sec.
Data Rate: Variable (Max 6000 kbps)
Audio Type: Dolby Digital Audio
Total Samples 290.252,160 Samples
Attributes: 48000 Hz, 5.1 Channels
Layer: None
Bit Rate 384 kbps
Started a new project, imported the mpeg into the timeline and proceeded to produce my DVD folders. The only custom setting was to reduce the bitrate to 5,000 to get the whole file onto one DVD.
So far so good. Problem is slight out of sync audio towards the middle to end of the DVD. It gets progressively worse as if the audio is at a slightly different frame rate to the video! I have double checked my settings when burning the DVD folders and they are the same as the mpeg except for the bitrate and I have chosen LPCM Audio 48000 Stereo. I tried first with Dolby but that gave the OOS so thought I would try this new setting but the result was the same.
-I just installed the VideoStudio v10 software and it captures video fine, however I have an issue with the audio. The audio is present but for some reason there is a noticeable static on the video file. Im using a 2000 Sharp ViewCam VL-A10 monaural/analog 8mm camcorder to transfer video to my computer. Im confused because there is NO static on the original 8mm tape, when I play video on the camera, the sound is fine as well as when I plug it in to my TV set for playback. I dont understand where the static is coming from on the digital transfer? Ive tried several capture formats MPEG, DVD, AVI etc. the static is present on all versions. Im using the EasyCAP USB device with A/V plugs for capturing.
View 14 Replies View RelatedUsing VideoStudio X4. After initial problems with installation it has now installed fine and is working well. However, when capturing video from my Panasonic NV-GS400 mini dv camcorder the film does not show in the preview window. It did at first but now does not preview. I have not changed any settings nor have I changed anything in my method of capture. The film does capture ok - capture in avi format - its just a little unsettling not being able to see it during capture. I watch it on the pull out screen of the camcorder so I can tell when to stop capture etc.
Also, when capturing, the film runs for a few seconds then stops and then starts again and the capture begins from the second start point. I never had the problem with Ulead 9 but did have it with ProX2 but wondered if that was just a glitch because I was running it on Windows 7 and it had not originally been developed for that. Apart from that the program works well even when rendering HD footage from my new Panasonic HDC-TM700.
I have Corel VideoStudio Pro X3 as well as the trial version of X4 which I have just downloaded. I am having the same problem with both versions. When I go into Capture, there is no image coming through the Capture Window, it is just black. When I hit Capture Video, it does start capturing and it does record video correctly, however when I stop capturing, the preview window turns black again.
How can I get the video to be seen in the Capture preview window?
My computer is Windows 7 Ultimate 64 bit edition. I am using a USB capture device, the Diamond Multimedia VC500 One Touch VHS Video Capture USB 2.0.
I have found myself trying to capture a logo that is round and copy it in order to paste it into another circle . (thus it has to be round , not rectangle or square)
The closest I have come was to use the Ellipe Select tool and "poke and hope".. but did finally get pretty much what I wanted.
I'm recently re-scanning some photos that were originallly scanned quite a few years ago. Giving them the same name as the previous scanned (only with a _1 at the end), I import the newly scanned photo to the same folder (which is how I organize my photos), to be able do compare and later copy metadata from the original scan to the latter. As I haven't yet done any flagging or rating, most metadata will contain only keywords. But stored under "Metadata" in Library view, "Capture time" is also stored, but I cannot find it anyway among the "Copy Metadata" options. Is there something I have missed, or is there a work-around somewhere?
View 2 Replies View RelatedI want to capture or copy sound from a project in Elements 8, save it to a file, and use it later in the project.
View 1 Replies View RelatedI am currently using Lightroom 4.4
Recently I have been asked for certain images taken in 2011.
When searching for them I have discovered that the original capture information has been "gone missing / become lost".
For clarity, the information I'm referring to is the ACTUAL capture date and time of the original image as appears in the raw file metadata.
This data no longer appears on ANY of the subsequent version of any image taken in that year whether PSD or Jpeg.From checks already carried out, the data remains on the original RAW files.
All other years are OK.How can I transfer the date & time of the original image capture from the raw file to subsequents copies (PSD / Jpegs etc)? As literally hundreds of images are involved, is there a bulk routine that I can perform to synchronise this data?
I have Ulead Videostudio 9. I am trying to capture from a DVD and following the manual instructions all goes OK up to the Import step. At that stage I get an error message "Temporary working forder does not exist. Report ID 0x8004083d(2109)" First time I have tried to capture stuff from a DVD. Program still works fine on all other aspects. I have checked the closed Ulead Forum and FAQ's but can find no solution. Is there anything I can do?
View 4 Replies View RelatedNo Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies View RelatedI just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
I just bought VSx4 but I noticed it crashes as soon as I try to capture
my camera: canon HV20 -firewire connected
my OS: windows 7
I already:
uninstalled, re-installed VSx4
turned off/pc - camera
connected/disconnected camera
since I installed vsx4 I can't capture in vs x3 too.
For convenience, I use my video camera for both video and taking still pictures. For video I use use a wide frame 16:9 while capturing stills I use a standard frame 4:3 (the standard frame allows a higher megapixel). I use VS X2 for creating my home DVD's and I use Photostory 3 for my slide shows.
I've never used the still capture function on VS until today. I needed a couple of stills from the video to match with the continuity of my slide show.
I realised that my screen capture would be wide screen but I figured I could edit the photo and crop it to 4:3. What actually happens is that VS X2 captures the image and squeezes it to 4:3 so in the end I get these long images!