I have found myself trying to capture a logo that is round and copy it in order to paste it into another circle . (thus it has to be round , not rectangle or square)
The closest I have come was to use the Ellipe Select tool and "poke and hope".. but did finally get pretty much what I wanted.
I have gotten to a point where I have the round text,, I have a seal with a blank space.. I would like to put the round text into the blank space,, but when I try, and no matter how I try,, the text is a white square with round text on it when I try to place it in the circle.
The other thought that came to me,, what if ..(the text circle size was a guess) the text does not fit.. how do I expand or collape it? I know I have in the pass while playing with round text.. gone back to that effect and changed angles, start points etc.. is that the only way?
I have attached what I have so far. ( I tried to attach the Paint.net file but I guess you can't, so these are the two I am working on,, as layers in Paint.net)
I wanted to use the capture screen feature but when I go to file-import-screen capture - the setup and capture features are grayed out and I can't get to set up. What can I do.
View 4 Replies View RelatedI'm using CS3 extended and would like to wrap a logo around a circular object.
View 2 Replies View RelatedA friend asked me to create a logo similar to The North Face by using a song name. The upper right corner needs to be rounded allowing the color fill between the two silver parts. It looks somewhat ok, but as you can see it is not very proportional. I tried the aics_scripts file that I found from searching, but i can't get it right, most likely because the curve in the logo is not perfect. I have linked jpegs of 2 possibilities - the third image is made from creating a border in the appearance but then i cant get an additional outline around it with the silver color
View 11 Replies View RelatedSo I am starting with a 12 sided star vector and using effect>stylize>round corners I am trying to round of the outer corners so they appear as a somewhat cartoonish cloud. But in doing this, it rounds of the inner corneds too, replicating a sort of bottle cap shape. How do I make it round off only the outer corners?
View 3 Replies View RelatedI'm recently re-scanning some photos that were originallly scanned quite a few years ago. Giving them the same name as the previous scanned (only with a _1 at the end), I import the newly scanned photo to the same folder (which is how I organize my photos), to be able do compare and later copy metadata from the original scan to the latter. As I haven't yet done any flagging or rating, most metadata will contain only keywords. But stored under "Metadata" in Library view, "Capture time" is also stored, but I cannot find it anyway among the "Copy Metadata" options. Is there something I have missed, or is there a work-around somewhere?
View 2 Replies View RelatedWhen I try to capture a video from camcorder-(HI 8 Tape) it starts to copy the stops and says tape is copy protected. Then program freezes. It worked last week and this is since svc pak 2 today.
View 4 Replies View RelatedI want to capture or copy sound from a project in Elements 8, save it to a file, and use it later in the project.
View 1 Replies View RelatedI am currently using Lightroom 4.4
Recently I have been asked for certain images taken in 2011.
When searching for them I have discovered that the original capture information has been "gone missing / become lost".
For clarity, the information I'm referring to is the ACTUAL capture date and time of the original image as appears in the raw file metadata.
This data no longer appears on ANY of the subsequent version of any image taken in that year whether PSD or Jpeg.From checks already carried out, the data remains on the original RAW files.
All other years are OK.How can I transfer the date & time of the original image capture from the raw file to subsequents copies (PSD / Jpegs etc)? As literally hundreds of images are involved, is there a bulk routine that I can perform to synchronise this data?
URL....My logo on the file that i created it in looks perfect. When i create a new, blank AI file and paste it into it, it pastes as a faded version of my logo. I have gone through all the settings i could find between my two files and made them identical, it still happens. When i paste the logo into the same file it was created in it pastes correctly.
View 20 Replies View RelatedI would like to create a triangle, but with (really) round corners. Not just the points rounded off a little, but the corners going around evenly like circles.
(see infantile free-hand drawing attachment as an example)
Is this to accomplish in an easy manner?
edit:
The attachment seems to be missing, so here's a link: [URL].......
how can I make such images for buttons with round sides like here: URL....- the read one and the green one.In Paint "only" a rectangle with round "edges" exist.At the moment I have this button images at URL.... but I don't like it.
View 3 Replies View RelatedRound Corner Borders?
After a round corner digital photo is created is there a way to outline the curved corners selection with a border?
(I have seen it done in Photoshop) I just upgraded to X3 hoping to be abe to accomplish this.
Searching for how to simply, quickly smooth round edges, I learned a lot of other things I'd been wondering how to do in PDN. But I didn't find a simple way to smooth round edges of non professional grade (not art) round outer edges. Say, for a Windows icon.
Even drawing the circle on a 32 x 32 background, when saved as png then opened in Greenfish Icon Editor & converted to ICO, the real icon (say on desktop) is still a bit jagged in places. The points at 0, 90, 180, 270 deg are obviously flattened & rest of circumference is a bit jagged (not terrible, but...).
I tried several tools to smooth edges a bit, but of course pixels are square... Read numerous posts - like [URL].....
This WAY overkill for what I'm doing - right now. Useful for later. All I want is circles or rounded corners on simple objects w/o spending much time - not for this type stuff. I learned good techniques useful for higher quality work.
PDN doesn't seem to have a simple, quicker way to half decently smooth circles / corners. Everything I tried just followed the square pixel edges or is quite tedious. Greenfish has some pretty decent tools - for making icons. But, smoothing rounded edges for something in the 32 px wide range is still pretty time consuming. Needs an algorithm to smooth circumferences.
How to make easly this logo having double rotation tetxt? [URL] .......
The text have different rotation directions
How I can change the corners of a jpg so they are round.
View 1 Replies View RelatedI have drawn hundreds of straight lines with arrowheads (in PSP X2) in the past.But now I need the first time to draw a round line (approx half of a full circle).I tried a couple of variants and expected a three-step-drawing:
First click to place a start node then click a middle node and finally third click the end node.Afterwards I should be able to move the middle node and PSP should complete a round arrow line.But I cannot achieve this.
It happens e.g. always that an area is created and filled with red color.I don't want to fill an area - just one line.What exactly do I have to select in the parameter toolbar for "Mode" "Contour" "Connect segments" "Miter Join",.
How do I change the paintbrush type from a round type to a square type, & make it permanent 'till I changed it?
View 5 Replies View RelatedI want to design a square icon with round corners. How do I get rid of the little white triangles in the four corners? I tried to design my icon on a transparent square canvas but I still get the little white triangles in the corners!!! And it does not seem possible to resize canvas to "fit" image size...
View 4 Replies View RelatedI have a Round Image that i want to print, however when i go to print, its too large so i fit to page, but when i do this the image goes a oval shape.
I want to keep the image as large as possible so i don't want to print on a smaller scale .
I have just downloaded and installed Paint.NET today; is it possible to capture screen shots?
View 8 Replies View RelatedI've used PSP for many years and used the screen capture many a time. But I can't get it working fully on Windows 7 x64. I usually have it configured to use F10 to start the capture of an area. It was working a bit (but never with IE8) about 30 minutes ago but just isn't working at all now.
View 4 Replies View RelatedVersion 1.5.0.12 (the SP2 patch was installed). But I'm unable to figure out how to setup screen capture because that option is grayed out. I'm unable to complete Step 1 due to the latter issue. That is: File | Import | Screen Capture | Setup; I can never reach the fourth selection.
View 3 Replies View RelatedScreen capture doesnt work in psp x4. I tried searching for this but no info at all on it. I have to resort to using the print screen option in windows and then paste as new image.
View 9 Replies View RelatedI have PSPro X.Often when I capture an image, figures show which I presume is the image size measurements.What can I do to avoid these figures being seen in the screen capture target area.
View 2 Replies View RelatedI have just installed PSP X3. I have 2 questions that I could not find answers to when searching the forum (though admittedly I found searching through here very confusing at times)
First the Service Packs. Do I need to install each on of these in chronological order? Or, will installing Service Pack 5 include all the prior service packs, so I only need to install that one alone?
Secondly, Screen Capture. I have clicked on Import/Screen Capture. However, Set Up and Start are grayed out and will not allow me to do it. On my old computer the prior version of PSP worked beautifully with screen captures and I never had to do any tweaking to make it work. What do I need to do in order to get Screen Capture functionality?
I'm not a pro at any of this by any stretch of the imagination. I'm a journalist and I use PSP for the pictures that are uploaded to my column. I need this screen capture capability in order to grab important pictures that I need on occasion.
I do a lot of screen captures mostly using Vdub to move frame by frame when I want a screencap. I don't get any problem with vdub but when I use other programs like MPC HC or sometimes even in WMP, the size dimensions sometimes gets captured with the image like this:
It gets quite annoying because I have to recapture the frame again and try different techniques to get it without the box or size dimensions showing up in the capture.I'm using Corel PSP x4 to do my screen captures. How to capture clearly without those box dimensions getting in the way?
HD Capture with Sony HVR-M25U Deck no preview or ability to capture?
View 1 Replies View RelatedI would like to know if it is possible to do a logo that can be uploaded to a web cms site like Joomla. [1] what format is required [2] what size should it be.
View 5 Replies View RelatedI have Corel VideoStudio Pro X3 as well as the trial version of X4 which I have just downloaded. I am having the same problem with both versions. When I go into Capture, there is no image coming through the Capture Window, it is just black. When I hit Capture Video, it does start capturing and it does record video correctly, however when I stop capturing, the preview window turns black again.
How can I get the video to be seen in the Capture preview window?
My computer is Windows 7 Ultimate 64 bit edition. I am using a USB capture device, the Diamond Multimedia VC500 One Touch VHS Video Capture USB 2.0.
