I've used PSP for many years and used the screen capture many a time. But I can't get it working fully on Windows 7 x64. I usually have it configured to use F10 to start the capture of an area. It was working a bit (but never with IE8) about 30 minutes ago but just isn't working at all now.
View 4 RepliesI wanted to use the capture screen feature but when I go to file-import-screen capture - the setup and capture features are grayed out and I can't get to set up. What can I do.
View 4 Replies View RelatedVersion 1.5.0.12 (the SP2 patch was installed). But I'm unable to figure out how to setup screen capture because that option is grayed out. I'm unable to complete Step 1 due to the latter issue. That is: File | Import | Screen Capture | Setup; I can never reach the fourth selection.
View 3 Replies View RelatedScreen capture doesnt work in psp x4. I tried searching for this but no info at all on it. I have to resort to using the print screen option in windows and then paste as new image.
View 9 Replies View RelatedI have PSPro X.Often when I capture an image, figures show which I presume is the image size measurements.What can I do to avoid these figures being seen in the screen capture target area.
View 2 Replies View RelatedI have just installed PSP X3. I have 2 questions that I could not find answers to when searching the forum (though admittedly I found searching through here very confusing at times)
First the Service Packs. Do I need to install each on of these in chronological order? Or, will installing Service Pack 5 include all the prior service packs, so I only need to install that one alone?
Secondly, Screen Capture. I have clicked on Import/Screen Capture. However, Set Up and Start are grayed out and will not allow me to do it. On my old computer the prior version of PSP worked beautifully with screen captures and I never had to do any tweaking to make it work. What do I need to do in order to get Screen Capture functionality?
I'm not a pro at any of this by any stretch of the imagination. I'm a journalist and I use PSP for the pictures that are uploaded to my column. I need this screen capture capability in order to grab important pictures that I need on occasion.
I do a lot of screen captures mostly using Vdub to move frame by frame when I want a screencap. I don't get any problem with vdub but when I use other programs like MPC HC or sometimes even in WMP, the size dimensions sometimes gets captured with the image like this:
It gets quite annoying because I have to recapture the frame again and try different techniques to get it without the box or size dimensions showing up in the capture.I'm using Corel PSP x4 to do my screen captures. How to capture clearly without those box dimensions getting in the way?
I have VideoStudio Pro X5 ultimate. Build # 15.1.0.34 I have upgraded my operating system from Windows 7 to windows 8. On windows 7, Screen Capture worked just fine. On windows 8 it does not operate. I get a message as follows: “VSSCap. Prepare Record Failed!!! #42” How can I get Screen Capture to work on my Windows 8 system? All other functions of VideoStudio Pro X5 seem to work OK. I tried to submit a question to Corel as to what this Error code means and how to correct the problem but they say "NO TECKS AVAILABLE TO ANSWER YOUR QUESTION" And just log me out?
What "Prepare Record Failed!!! #42" means and or how to correct it? It seems to me that if Corel gives you an error message then they should support that error but they do not! Why don't they? They say that Windows 8 and VideoStudio Pro X5 Ultimate are completely compatible then why am I getting this message. Corel really should support it's message errors and not let its customers struggle for an answer? I love VideoStudio Pro X5 Ultimate and try as I may I cannot solve this problem.
Setup: Designer Pro 7 on win 7 (64bit)
Trying to use the builtin screen capture tools under Utilities/Screen capture.
There appears to be no way to do a selected capture or partial selection of parts of a window. Instead we have:
Full screen []
active window []
content of active window [x]
So I selected the last one above as shown `Content of Active Window'
But what I actually get is a mini version of the entire Designer pro 7 application Including the menus, borders, and all that guff that no one usually wants in a capture of part of the full screen.
So what does `Content of active window' mean as apposed to `Active window'?
Its really unbelievable that there is no provision like `Region' found in most screen grab tools where you select with the mouse what you want captured.
Maybe I'm just missing how to use this thing, but have included the result of what a `content of active window' does. Its a mini version of the entire application...
I have just downloaded and installed Paint.NET today; is it possible to capture screen shots?
View 8 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View Relatedwhen I close PSP X5 I get this blank white nag screen telling me I can get some free tips for being a better photographer and then in the middle there's a checkbox to tell it that I don't want it to appear no more so I tick it then click "close" nothing happens and clicking the red X doesn't do anything and I've checked process explorer and its linked to Corel PSP X5 for sure and to close it I have to kill the process every time.
Is this addressed in SP2 for X5? Or do I need to reinstall?
Using PSP X3 on an Win7 Home Premium system with an ATI HD 5700 Series card.My Version is 13.2.0.35 and video card driver/software was updated 2 days ago.
I do a lot of screen captures but I have not been able to get X3 to include the Cursor in the capture!!I have tried it in Full Screen, Client area, and Window but it never shows up.I have even un-checked it (Include Cursor) and re-checked it to make sure it was set
Under the direction of the tech support i have reset my Corel Paintshop Prox5 back to factory settings, and now my Windows screen tab for lack of a better word, where you can move the windows screen around with your mouse, the part that has the Minimize,Maximize,Close, at the top, is now off, is there a way to get it back on ?Without it i cant have two screens side by side. One covers the other one up. When reloading i some how turned it off ?
View 2 Replies View RelatedI have successfully downloaded my Paintshop Pro 9 into my new computer with Windows 8 operating system. I am now trying to upload my Paint Shop Pro X2 upgrade but am getting error "The system cannot read from specified device"
View 1 Replies View RelatedI recently installed the Developer Preview of Windows 8. I already had PSP x4 installed in Windows 7 and it worked fine. Once I tried launching it after the upgrade if failed to load. I completely uninstalled PSP x4 and reinstalled. Still will not launch.
View 14 Replies View RelatedI need to reformat Windows 7. I Up Graded from PSP X4 to X5 with a down load. I do not have a X5 disk. When I reformat I will loose the program ( I Think) if I do, will I be able to down load X5 again with out being charged?
View 2 Replies View RelatedI just installed PaintShop Pro X4 trial version on windows 8 consumer preview. The installation went fine, however, I cannot start the program. I don't get any error, but it just doesn't start. How can I start using this program on windows 8. I tried it on windows 7, and it works without any issue. but I really like to use it on windows 8.
View 2 Replies View RelatedI have been using Paint Shop Pro for around fifteen years now and have always been very happy with each new version. I tended to upgrade every other version and have been using X2 for the last couple of years. With the recent announcement of Corel's service pack to fix some of the problems of X4, I decided to upgrade.
I uninstalled X2 and rebooted ready to install my shiny new copy of X4. All went well until I tried to start it up. The splash screen appears and starts to load up the components but every time it gets to "Initializing Palletes" it crashes and I get the "Paint Shop Pro has stopped working" and the options to close or go online and check for a solution!
I've tried uninstalling it, repairing the install, and also uninstalling it using the RevoUnInstaller as recommended by df but it didn't work. I also tried installing SP1 to see if it worked but didn't.
I can't even get this thing to start up at the moment. I need it for a few projects I'm working on and am beginning to wish I had left well alone!
I'm also dreading trying to re-install X2 as I can see that having problems if X4 has screwed up any deep-seated settings.
Is it possible to have more than one picture (preferably 2 or 4 and maximum 6) on a full screen at the same time. So that choosing which picture you want to keep is made easier. Now I increase zoom of thumbnails but this leaves a lot of unused space around them including the different tool bars.
View 2 Replies View RelatedI downloaded and installed Service Pack 2 for X4 some time ago. It created havoc with my highly customized workspace and I reverted to the System Restore point set before installing SP2. So, no SP2 on my system.
Corel Guide>Settings>Messages, both messages UN-ticked.
Clicked on Check for updates using the Corel Guide and also under Help>Check for updates, to see what happens.
Nothing happens, they just stop running I then close X4 and (quite a while later, usually when doing something else) a screen appears "An important update is available for PSPX4 Download update now!
I'm a longtime user of PSP 8 and just downloaded the trial version of PSP X5, thinking to buy it. With PSP 8, if I wanted to edit two images on the screen at the same time, I loaded them both into the program and then used the minimize button at the upper right hand of each image to switch them out of full-screen mode and put them next to each other. PSP X5 no longer has the minimize buttons attached to the images. I can tab back and forth from one image to the other, but I can't figure out how to put them both on the screen simultaneously. Is this feature still present somewhere in PSP X5? How do I access it?
View 2 Replies View RelatedWhen I open up an editing box. ie Local Tone Mapping, Adjust Brightness/contrast etc etc, the box that opens up is only partially on screen, you cant drag it into a different position because the top part where you click to drag is off screen, even if I semi minimise the window it is still off screen. Is there a way when these are opened to dock them to one side or to a permanent position. Windows 7 64bit - PSPP X3
View 2 Replies View RelatedI've been a PSP user since PSP 7.
I've got a question about x4. When I do multiple screen captures and then I click on the minimized x4 icon, it doesn't just open back to the workspace like it used to in psp 7. It always opens this pop up of all the captured files I took and I have to select one in order to re-open the minimized x4. It's so irritating because I go back n forth a lot taking screen caps but it always has to force me to choose a file.
If there is a setting to skip it and just re-open x4 to workspace when I click on the minimized icon after taking multiple screen caps?
Image with resolution larger than monitor size, view in PSP set to 1:1...Ctrl+Shft+A for full screen view.
PSP switches to full-screen with move (hand) tool present for moving around the image. However, when the move tool is used it behaves like the Esc key and defaults back to preview view within PSP.
I am not sure how this happened, but using PSPX3, when i need a new layer, the dialogue window is way to the top. The values and all are accessible but when i am doing live presentations or recording tutorials, this is an annoyance. It is so high that i cannot grab the top of the window and pull it down. It is only for that one dialogue window and only for that one PSP version.
I tried resetting the workspace to default, i tried reloading an old workspace, but that one stubborn dialogue window is still there on top.
I tried changing the screen resolution temporarily to see if i could "grab it" to move it back down, but it still is "ungrabbable".
I just haven't found the setting, but I can't seem to make the cursor disappear during full screen preview in PSP x4! Is it something I'm not selecting?
I have searched to the ends of the internet for an answer, but have come up with nothing, however I noticed that there was an ESC key bug with full screen preview in PSP x3, and having a visible cursor would allow one to exit full screen without having to press a key. Could this be why the cursor is now visible? Now that I think about it, I've always been able to exit with either the ESC key or a mouse click. Still, this is something I've never seen before in any version of PSP.
The placement dialogue for printing which used to be in inches is now in mm and there seems to be no way of changing it back to inches.
View 2 Replies View RelatedI have turned off tabbed windows in the Window menu and can now open my images in their own automatically sized windows as before. The problem is that if for any reason I double click on an open image, all images switch back to tabbed mode. To revert to non-tabbed mode I then have to use the Window menu again but it then cascades the images in identically sized windows and to get back to my original layout I have to click each one in turn and select "Fit to Image" from the Window menu.
Why would I double click an image in the first place? Well normally I wouldn't but it is surprising how easily it can be done by accident. If at that time I have 20-30 images open, which is often the case, it is very time consuming to reset them all.
I have been having problems with my PSP X2 releasing memory and had time today to reinstall. When I purchased my program it said it was compatible with windows 7, 64bit. Now I see on their web site that PSP X2 doesn’t support Windows 7. So if I uninstall and have problems reinstalling will I be SOL?
What happens if I uninstall and can’t reinstall? Also can’t I just go into Control Panel and tell it to uninstall?
After screen capturing an image, when viewed in the PSPro X workspace, a thin white border shows on the right side and at the bottom.This shows what ever is captured, it wont clone brush or crop out.I have to apply a border to disguise it.
View 14 Replies View Related