I have been having problems with my PSP X2 releasing memory and had time today to reinstall. When I purchased my program it said it was compatible with windows 7, 64bit. Now I see on their web site that PSP X2 doesn’t support Windows 7. So if I uninstall and have problems reinstalling will I be SOL?
What happens if I uninstall and can’t reinstall? Also can’t I just go into Control Panel and tell it to uninstall?
Just installed PSP Pro X4 and tried to uninstall X3. Can't do it. Tried three times. Get an error msg: "The Installation Wizard encountered a problem while trying to configure your software.
Could not access file: c:users homasappdata....setup.msi -- The system cannot find the path specified. Would you like to continue? Yes No" When I choose Yes I get another error msg that says: "Installation Wizard not complete. Your system has not been modified. To complete installation at another time, please run setup again. Click finish to exit the wizard. You do not have sufficient privileges to complete this installation. This installation requires administrative oo elevated privileges. Please contact your administrator and then retry this installation."
Figured I'd have to reload but the PSP files appear to be there but it wont run so I was gonna reinstall it. When I put in the program disc it runs a bit then says "Setup.xml could not be loaded. This may indicate that the file is corrupt."
I get the same thing if I try to remove PSP with control panel....
I have been using PSP x3 for awhile with no issues, but about a month ago, it simply stopped working. I open the program via shortcut, and the logo blinks onscreen, but the program never opens. No explanation, no trace.
I have attempted to uninstall and re-install, but each attempt to uninstall completely freezes the PC dead and I end up having to physically turn the PC off. I'm detecting no infection on the PC.
Instant Viewer persists in opening images that are not associated with PSPX3 & then will not close - requires Task Manager.
View 5 Replies View RelatedI want to use CreateDIBSection to create a DIB section of >2GB, and I prefer to use GDI functions, not GDI+ or .Net.
I know I can not accomplish this task on 32-bit Windows, so I tried on 64-bit version. Then I found that I can create several 2GB DIB sections but can not create one which is over 2GB, even if a few bigger than 2GB is impossible (such as 2.1GB). The test platform is 64-bit Windows 7 with 8GB physical memory.
It seems that there's a 2GB limitaion, is that true? Does GDI object still have this 2GB limitation on 64-bit OS?
But I can allocate one memory block much more than 2GB on the same system using malloc or some functions like that.
I have been doing some very simple editing of photo's taking a copy from part of one and pasting it as a new layer on another photo. I can then manipulate the size, placement and orientation easily with my X4 version of PSP.
I just purchased the new x6 and am ASTONISHED that this simple exercise doesn't work at all in the 64 bit version and only partially in the 32bit version of x6. What happens is that the screen isn't redrawing the changes as you move the pasted part around. It can be refreshed manually but gets into such a mess when you are trying to place the image that it's unusable. I go back to X4 and using exact same photo's I can work without any problem.
I'm on win7 ultimate all upto date and an 8800 GTS graphics card with latest drivers. There should be no reason x4 works and x6 does not.
Just installed CS6 on my new workstation and Photoshop; it freezes upon opening.Every other program I have installed has worked flawlessly, including the rest of the CS6 Suite and Lightroom 5.Both Windows and the Adobe Suite have all available updates already installed.Computer is a new HP Z420 Xeon Workstation, Windows 7 Pro 64bit, 16GB Ram.
View 15 Replies View RelatedIn Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random.
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedI have installed both the 32-bit and 64-bit version of CS5 in my Win7 system. Did that because some plugins does not run on 64-bit.Now I wanted to trial CS6 and so do not wish to have too many versions on my pc.
I want to uninstall ONLY the 32-bit CS5. When I go to either my Uninstaller software or the "Program & Features" of Control Panel, I could only see one icon/program for PS- not 2 (one for 32-bit & 64-bit respectively).
How do I uninstall only the 32bit without affecting the 64bit version?
Why can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
View 4 Replies View RelatedI have successfully downloaded my Paintshop Pro 9 into my new computer with Windows 8 operating system. I am now trying to upload my Paint Shop Pro X2 upgrade but am getting error "The system cannot read from specified device"
View 1 Replies View RelatedI recently installed the Developer Preview of Windows 8. I already had PSP x4 installed in Windows 7 and it worked fine. Once I tried launching it after the upgrade if failed to load. I completely uninstalled PSP x4 and reinstalled. Still will not launch.
View 14 Replies View RelatedI need to reformat Windows 7. I Up Graded from PSP X4 to X5 with a down load. I do not have a X5 disk. When I reformat I will loose the program ( I Think) if I do, will I be able to down load X5 again with out being charged?
View 2 Replies View RelatedI just installed PaintShop Pro X4 trial version on windows 8 consumer preview. The installation went fine, however, I cannot start the program. I don't get any error, but it just doesn't start. How can I start using this program on windows 8. I tried it on windows 7, and it works without any issue. but I really like to use it on windows 8.
View 2 Replies View RelatedThe placement dialogue for printing which used to be in inches is now in mm and there seems to be no way of changing it back to inches.
View 2 Replies View RelatedI've used PSP for many years and used the screen capture many a time. But I can't get it working fully on Windows 7 x64. I usually have it configured to use F10 to start the capture of an area. It was working a bit (but never with IE8) about 30 minutes ago but just isn't working at all now.
View 4 Replies View RelatedI have turned off tabbed windows in the Window menu and can now open my images in their own automatically sized windows as before. The problem is that if for any reason I double click on an open image, all images switch back to tabbed mode. To revert to non-tabbed mode I then have to use the Window menu again but it then cascades the images in identically sized windows and to get back to my original layout I have to click each one in turn and select "Fit to Image" from the Window menu.
Why would I double click an image in the first place? Well normally I wouldn't but it is surprising how easily it can be done by accident. If at that time I have 20-30 images open, which is often the case, it is very time consuming to reset them all.
I was working in Corel PaintShop Pro x4 when I noticed that there was an additional tab that was named the same as the file that I was currently working on but they were numbered 1 and 2. As I work on one file the other updates at the same time. I tried selecting "duplicate" under Windows but this duplicates the window as "Image #" and does not update when I change the original file.
View 7 Replies View RelatedI store all my photos in the directories under the public pictures folder, (C:Users Public Pictures) rather than in my pictures folder in my documents. I do this so that all the users on the system can get to the pictures.
I'm having problems getting Paint Shop Pro to recognize the folder correctly. I have added the c:users public pictures folder to the organizer using the Browse More Folders action and it shows up. However, the Smart Collections don't see any of the files in the folders under this dir.
My overall goal here is to be able to use the timeline feature on all my photos at once, so I want to get all of the photos into the All Pictures smart collection.
Using external tools to automate PaintShop Pro operations? Such as AutoHotkey, AutoIt, Macro Express Pro, etc? To do stuff that scripts can't?
Mine is an old version, PSP 8, but this issue probably applies to more recent ones.
None of these programs seem able to access PSP's image windows. They don't appear in the list of windows when using AutoIt v3 Window Info, for example, or AHK Window Info 1.7. If there's some way to work with these 'child' windows.
This is a strange thing : I have PSP X5 under my computer for about one year, and this morning it does not start when I click on PSP icon. When I look at the process monitoring, the exe appears and disappears 3 seconds later. I tried the restore database, nothing changed. I tried to rename the database file, no more success.
View 3 Replies View RelatedI upgraded to PaintShop Pro X4 from PSP v9.0 and I noticed images are not opened in their own separate windows anymore? I need the ability to open an image in its own window and drag it around the workspace ...how to enable this in PSPX4 ??
View 8 Replies View RelatedHow to view psp images in Windows Explorer (I have Windows 7 - 64 bit)? When I am in PSP X3 I open my files by going to "file" then "open". I get the standard psp icon instead of the actual pic view. PSD and PNG files show up, PSP images do not.
I do not like using the pic display at the bottom of my screen. I want the largest workspace possible.
When I pull up the levels windows both are black. If I reduce the image in the windows, I get a small black square. I have used this feature on various versions for years.
View 1 Replies View RelatedHow I can disable Corel PaintShop Pro X5's Windows Explorer shell extensions?
View 2 Replies View RelatedAccording to URL....I should be able to sample a color from the desktop. This doesn't work when I try to capture a color from a web page displayed in IE 10 (desktop mode).
It does work with Chrome, and I suspect other browsers as well (haven't the time to try them all).
The title just about says it all. I usually edit in Full Editor mode, but normally there is an Explorer-like ribbon running across the bottom, much like the one in Express Lab. I opened PSP ProX3 today and it was gone. I'm guessing it disappeared when i did some editing for my daughter in a non-standard (for me) mode.
How do I get it back? I swear I have hunted and even RTFM'd.
I just purchased CS6 and installed it -- everything works. But I also have CS5 -- Windows 7 Professional 64-bit -- How do I install CS5? CS5 does not appear in the Control Panel "Programs" listing.Is there an "uninstaller" somewhere?
View 2 Replies View Relateduninstall cs4 from windows I have cs5 and cannot open raw files thru bridge
View 2 Replies View Related