Screen capture doesnt work in psp x4. I tried searching for this but no info at all on it. I have to resort to using the print screen option in windows and then paste as new image.
View 9 RepliesI wanted to use the capture screen feature but when I go to file-import-screen capture - the setup and capture features are grayed out and I can't get to set up. What can I do.
View 4 Replies View Relatedproblem of the screen capture/grab not working and has anyone solved this problem or know why it happens?
View 10 Replies View RelatedI've used PSP for many years and used the screen capture many a time. But I can't get it working fully on Windows 7 x64. I usually have it configured to use F10 to start the capture of an area. It was working a bit (but never with IE8) about 30 minutes ago but just isn't working at all now.
View 4 Replies View RelatedVersion 1.5.0.12 (the SP2 patch was installed). But I'm unable to figure out how to setup screen capture because that option is grayed out. I'm unable to complete Step 1 due to the latter issue. That is: File | Import | Screen Capture | Setup; I can never reach the fourth selection.
View 3 Replies View RelatedI have PSPro X.Often when I capture an image, figures show which I presume is the image size measurements.What can I do to avoid these figures being seen in the screen capture target area.
View 2 Replies View RelatedI have just installed PSP X3. I have 2 questions that I could not find answers to when searching the forum (though admittedly I found searching through here very confusing at times)
First the Service Packs. Do I need to install each on of these in chronological order? Or, will installing Service Pack 5 include all the prior service packs, so I only need to install that one alone?
Secondly, Screen Capture. I have clicked on Import/Screen Capture. However, Set Up and Start are grayed out and will not allow me to do it. On my old computer the prior version of PSP worked beautifully with screen captures and I never had to do any tweaking to make it work. What do I need to do in order to get Screen Capture functionality?
I'm not a pro at any of this by any stretch of the imagination. I'm a journalist and I use PSP for the pictures that are uploaded to my column. I need this screen capture capability in order to grab important pictures that I need on occasion.
I do a lot of screen captures mostly using Vdub to move frame by frame when I want a screencap. I don't get any problem with vdub but when I use other programs like MPC HC or sometimes even in WMP, the size dimensions sometimes gets captured with the image like this:
It gets quite annoying because I have to recapture the frame again and try different techniques to get it without the box or size dimensions showing up in the capture.I'm using Corel PSP x4 to do my screen captures. How to capture clearly without those box dimensions getting in the way?
under Windows 7 pro and psp13.2.0.14 it don't work anymore. I even try to make it work in an old version of psp: V9.10. It still didn't work. Does any of you know something about kpt 5.1? I think it fail because of upgrades by Windows7 pro.
View 2 Replies View RelatedI am trying to use Color Balance and the window doesn't work. The only part that shows is the "Enhance Color Balance" box, the words "purple" and "green" just above, and the preview arrow (which does nothing) and "preview on image". Preview on image is checked and it does show changes but I am unable to uncheck it. Nothing else shows. Nothing I have tried has worked, including restarting the computer.
View 6 Replies View RelatedI'm running PaintShop Pro X5 15.1.0.10 on Windows 8 (64-bit). I just tried to create a drop shadow, possibly for the first time since I upgraded from X4, and it just doesn't work. I mean nothing happens.
I added a white border, as usual, and then tried to create my drop shadow. I tried it with the default settings, and I tried it with some random settings. As I said, nothing whatsoever happened.
Inner bevel and buttonize work just fine. (I haven't tried cutout.) Chisel also doesn't seem to work; in fact, it seems to come and go. It's the same with outer bevel: it isn't always available.
I'm not a novice when it comes to PaintShop Pro. I've been using it since it was shareware. I've certainly done drop shadows many times.
I'm completely baffled. Other than uninstalling and re-installing, I can't think what to do.
Another problem, this one since installing Service Pack 1.
The histogram is missing from the histogram adjustment window. Everything is there and works but no histogram. How can you adjust it without histogram? What is up with this? It works in x2.
I'm running PSPP X3 under Windows 7 x64.
I select some jpegs in the Organizer and click the "Share as E-mail" button... and what does it do? It puts up an alert saying There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default Programs control panel.
After looking at reviews, I took the big step and bought the download version of Photo Pro X3, which got me a 2nd download file called Photo Essentials 4. Installed X3 first, then PE4. I've installed, uninstalled, reinstalled 'till I'm blue in the face. X3 looks like a good product, at least with the little I've done so far. But . . .
When I start Photo Essentials, which opens as Photo Project Creator, I get nowhere. Step one: selecting what you want to create works fine. However, on the screen where photo selection should be made, I only get the Desktop and My Computer icons, and My computer won't expand.
After 2 days of frustration, I decided to install ONLY Photo Essentials 4 on my wife's PC to see what happened. It opened with a screen that said Photo Essentials 4 at the top, and something that would allow me to paint over the top of a picture. Doesn't even resemble what opens on my PC.
Both PC's are running Windows XP Media Ed. I've noticed apparently similar problem with Windows 7, but is this really just the norm? I tried the cure I found elsewhere in this forum, by shutting down certain processes, and deleting everything within Digital Studio, but it didn't change anything.
According to URL....I should be able to sample a color from the desktop. This doesn't work when I try to capture a color from a web page displayed in IE 10 (desktop mode).
It does work with Chrome, and I suspect other browsers as well (haven't the time to try them all).
I just got a new touch screen computer and Photo-Paint doesn't even respond to touch events. Is there a patch for this? I also have the unmentionable CC program and it half works by dragging my finger from outside the document then dragging into the doc - which is totally unworkable.
I've read Sony, Toshiba and Asus touch computers aren't compatible with that "other" paint package and Corel. What's the workaround? This is just a shame that no touch screen computers work with them.
Are there any touch screen computersout there that working with drawing packages? Or at least Corel?
I'm using GIMP 2.6.11 on Windows XP. I use "ALT + PRINT" to capture the active program's screen and "Edit -> Paste as -> New Image" to create a new image from the captured screen.
The problem is that the new image always shows extra lines (about 3-pixel wide) on the left side and clips the right side. I haven't verified it pixel-by-pixel, but it looks like what's clipped on the right side is displayed on the left side.
But the problem doesn't happen when I do "File -> Create -> Screen Shot -> Grab a single window"; it shows up nicely.
Also even when I use "ALT + PRINT" to capture, the problem doesn't happen when I paste it to a different program, such as Windows Paint or even WordPad; it happens only when I do "Paste as New Image" in GIMP.
The tethered capture doesn't seem to be working in lightroom 4.1 RC with the canon 5D mk3. The camera is detected with the correct name, but no camera parameter is recognized, and the camera can't take any photo.
I've experienced this both on Windows 7 64bits and Mac OS X. Importing canon 5D mk3 pictures works fine.
I am using Video Studio X6 trial and the Screen Capture feature does not work.The capture window opens but the Capture Button is grayed out along with the Sound Source button.
I am running this on an XP SP3 system with -
4 GB memory
2.66 Ghz dual core processor
Is there any information available as to what requirements my system may not have? All other programmes run OK on the computer.
Setup: Designer Pro 7 on win 7 (64bit)
Trying to use the builtin screen capture tools under Utilities/Screen capture.
There appears to be no way to do a selected capture or partial selection of parts of a window. Instead we have:
Full screen []
active window []
content of active window [x]
So I selected the last one above as shown `Content of Active Window'
But what I actually get is a mini version of the entire Designer pro 7 application Including the menus, borders, and all that guff that no one usually wants in a capture of part of the full screen.
So what does `Content of active window' mean as apposed to `Active window'?
Its really unbelievable that there is no provision like `Region' found in most screen grab tools where you select with the mouse what you want captured.
Maybe I'm just missing how to use this thing, but have included the result of what a `content of active window' does. Its a mini version of the entire application...
I have just downloaded and installed Paint.NET today; is it possible to capture screen shots?
View 8 Replies View RelatedI have a packard bell with a multi-touch screen, but when using Photoshop CS6 my touch screen doesn't work... is this just settings or prefs i need to adjust?
View 1 Replies View RelatedI have Windows 8, and Photoshop CS6. All of my blending modes work, except for Screen. I don't know why it doesn't, but I do use it somewhat frequently, and it's really holding me back at this point.
View 4 Replies View Relatedwhen I close PSP X5 I get this blank white nag screen telling me I can get some free tips for being a better photographer and then in the middle there's a checkbox to tell it that I don't want it to appear no more so I tick it then click "close" nothing happens and clicking the red X doesn't do anything and I've checked process explorer and its linked to Corel PSP X5 for sure and to close it I have to kill the process every time.
Is this addressed in SP2 for X5? Or do I need to reinstall?
Using PSP X3 on an Win7 Home Premium system with an ATI HD 5700 Series card.My Version is 13.2.0.35 and video card driver/software was updated 2 days ago.
I do a lot of screen captures but I have not been able to get X3 to include the Cursor in the capture!!I have tried it in Full Screen, Client area, and Window but it never shows up.I have even un-checked it (Include Cursor) and re-checked it to make sure it was set
Under the direction of the tech support i have reset my Corel Paintshop Prox5 back to factory settings, and now my Windows screen tab for lack of a better word, where you can move the windows screen around with your mouse, the part that has the Minimize,Maximize,Close, at the top, is now off, is there a way to get it back on ?Without it i cant have two screens side by side. One covers the other one up. When reloading i some how turned it off ?
View 2 Replies View RelatedNow that I've upgraded to X6 64 bit, my windows 8 explorer does not show .pspimage thumbnails.
View 11 Replies View RelatedI have been using Paint Shop Pro for around fifteen years now and have always been very happy with each new version. I tended to upgrade every other version and have been using X2 for the last couple of years. With the recent announcement of Corel's service pack to fix some of the problems of X4, I decided to upgrade.
I uninstalled X2 and rebooted ready to install my shiny new copy of X4. All went well until I tried to start it up. The splash screen appears and starts to load up the components but every time it gets to "Initializing Palletes" it crashes and I get the "Paint Shop Pro has stopped working" and the options to close or go online and check for a solution!
I've tried uninstalling it, repairing the install, and also uninstalling it using the RevoUnInstaller as recommended by df but it didn't work. I also tried installing SP1 to see if it worked but didn't.
I can't even get this thing to start up at the moment. I need it for a few projects I'm working on and am beginning to wish I had left well alone!
I'm also dreading trying to re-install X2 as I can see that having problems if X4 has screwed up any deep-seated settings.
Is it possible to have more than one picture (preferably 2 or 4 and maximum 6) on a full screen at the same time. So that choosing which picture you want to keep is made easier. Now I increase zoom of thumbnails but this leaves a lot of unused space around them including the different tool bars.
View 2 Replies View RelatedI downloaded and installed Service Pack 2 for X4 some time ago. It created havoc with my highly customized workspace and I reverted to the System Restore point set before installing SP2. So, no SP2 on my system.
Corel Guide>Settings>Messages, both messages UN-ticked.
Clicked on Check for updates using the Corel Guide and also under Help>Check for updates, to see what happens.
Nothing happens, they just stop running I then close X4 and (quite a while later, usually when doing something else) a screen appears "An important update is available for PSPX4 Download update now!
I'm a longtime user of PSP 8 and just downloaded the trial version of PSP X5, thinking to buy it. With PSP 8, if I wanted to edit two images on the screen at the same time, I loaded them both into the program and then used the minimize button at the upper right hand of each image to switch them out of full-screen mode and put them next to each other. PSP X5 no longer has the minimize buttons attached to the images. I can tab back and forth from one image to the other, but I can't figure out how to put them both on the screen simultaneously. Is this feature still present somewhere in PSP X5? How do I access it?
View 2 Replies View Related