Paint Shop Pro :: Drop Shadow Doesn't Work
Jan 22, 2013
I'm running PaintShop Pro X5 15.1.0.10 on Windows 8 (64-bit). I just tried to create a drop shadow, possibly for the first time since I upgraded from X4, and it just doesn't work. I mean nothing happens.
I added a white border, as usual, and then tried to create my drop shadow. I tried it with the default settings, and I tried it with some random settings. As I said, nothing whatsoever happened.
Inner bevel and buttonize work just fine. (I haven't tried cutout.) Chisel also doesn't seem to work; in fact, it seems to come and go. It's the same with outer bevel: it isn't always available.
I'm not a novice when it comes to PaintShop Pro. I've been using it since it was shareware. I've certainly done drop shadows many times.
I'm completely baffled. Other than uninstalling and re-installing, I can't think what to do.
View 2 Replies
ADVERTISEMENT
Sep 14, 2011
This bug has always been in PSP. for as long as i can remember. but in previous versions it just sent it bananas. in this version it can cause a full crash and lock up.
If you have no layer below the one currently selected, for example you only have one raster layer (put something in this layer suitable for drop shadow,) and you select 3D effects -> drop shadow with 'shadow on new layer' selected every time you adjust one of the shadow parameters it creates a new layer. so you can end up with dozens of new layers. seems like part of the routine is to renew the process every time a parameter is adjusted but the logic that removes the layer doesn't work when the source is at the bottom.
new to X4 is that if my system is under high cpu utilization it just completely crashes. probably the method by which it allocates the new memory to new layers is timing out.
View 14 Replies
View Related
Dec 10, 2011
Attached there is a picture made through PhotoScape where big outline rectangle is rounded. I am trying to do similar one through PSP. Drawing I found some difficulties:
a) How to create a rounded rectangle? I tried to use “rectangle tool” but I couldn’t find adjust to make it “rounded”.
b) Considering the possibility to create a “rounded rectangle” and applying “shadow drop” on it, will the shadow appear “rounded” as well? Or is there something to do?
c) In some tests I made applying “shadow drop” on a normal rectangle (as a new layer) the only adjust I could make after that was on “shadow size” (dragging the mouse). I couldn’t find a way to access effect properties to readjust attributes as “opacity” or “blur”. How to come back to “shadow drop” configuration panel (attached) to readjust settings as opacity or blur?
View 5 Replies
View Related
Oct 28, 2011
I have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies
View Related
Feb 23, 2012
under Windows 7 pro and psp13.2.0.14 it don't work anymore. I even try to make it work in an old version of psp: V9.10. It still didn't work. Does any of you know something about kpt 5.1? I think it fail because of upgrades by Windows7 pro.
View 2 Replies
View Related
Dec 3, 2011
I am trying to use Color Balance and the window doesn't work. The only part that shows is the "Enhance Color Balance" box, the words "purple" and "green" just above, and the preview arrow (which does nothing) and "preview on image". Preview on image is checked and it does show changes but I am unable to uncheck it. Nothing else shows. Nothing I have tried has worked, including restarting the computer.
View 6 Replies
View Related
Oct 4, 2011
Screen capture doesnt work in psp x4. I tried searching for this but no info at all on it. I have to resort to using the print screen option in windows and then paste as new image.
View 9 Replies
View Related
Dec 4, 2011
Another problem, this one since installing Service Pack 1.
The histogram is missing from the histogram adjustment window. Everything is there and works but no histogram. How can you adjust it without histogram? What is up with this? It works in x2.
View 14 Replies
View Related
Jun 10, 2011
I'm running PSPP X3 under Windows 7 x64.
I select some jpegs in the Organizer and click the "Share as E-mail" button... and what does it do? It puts up an alert saying There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default Programs control panel.
View 4 Replies
View Related
May 14, 2010
After looking at reviews, I took the big step and bought the download version of Photo Pro X3, which got me a 2nd download file called Photo Essentials 4. Installed X3 first, then PE4. I've installed, uninstalled, reinstalled 'till I'm blue in the face. X3 looks like a good product, at least with the little I've done so far. But . . .
When I start Photo Essentials, which opens as Photo Project Creator, I get nowhere. Step one: selecting what you want to create works fine. However, on the screen where photo selection should be made, I only get the Desktop and My Computer icons, and My computer won't expand.
After 2 days of frustration, I decided to install ONLY Photo Essentials 4 on my wife's PC to see what happened. It opened with a screen that said Photo Essentials 4 at the top, and something that would allow me to paint over the top of a picture. Doesn't even resemble what opens on my PC.
Both PC's are running Windows XP Media Ed. I've noticed apparently similar problem with Windows 7, but is this really just the norm? I tried the cure I found elsewhere in this forum, by shutting down certain processes, and deleting everything within Digital Studio, but it didn't change anything.
View 12 Replies
View Related
Dec 28, 2012
According to URL....I should be able to sample a color from the desktop. This doesn't work when I try to capture a color from a web page displayed in IE 10 (desktop mode).
It does work with Chrome, and I suspect other browsers as well (haven't the time to try them all).
View 4 Replies
View Related
Dec 16, 2013
I cant find the drop shadow plugin download link. I also need downloading it. What is the download link for the drop shadow plugin, I need it for a project.
View 9 Replies
View Related
May 17, 2013
I add a slight drop shadow to my text in an ebook cover I'm working on. Can I do that in paint.net?
View 6 Replies
View Related
Jul 15, 2012
drop shadow plug-in?I know how to create drop shadow effects without the plug-in, but I'm trying to use the plug-in and am having no success.
1. I open Paint.net 3.5.10 and click the NEW button, then click OK in the New dialog box.
2. I create some plain text. I am using Arial 26 font and solid black color. The Layers window has one layer named Background.
3. I open up the Drop Shadow plug-in and just mess around with it, but nothing happens.
I have a feeling I'm missing a step in between steps 2 and 3. Do I need to duplicate the layer, or add a new layer? If I do, what do I have to do once the second layer is created?
View 4 Replies
View Related
Apr 11, 2012
How do you use the drop shadow plugin on your images? I would like to make elements stand out, how do I make it to do so? Do I have to magic wand the image I want to stand out?
And how do I use this:
View 3 Replies
View Related
Jun 22, 2012
I had to do a clean install (Archive and Install) recently on my Macintosh (450 MHz PowerPC G4, 1.25 GB SDRAM, OSX 10.4.11) and found afterwards that the drag-and-drop capabilities of Photoshop (CS2, version 9.0.2) were no longer available. In addition to this,
I'm now not able to edit original graphics in Photoshop through the links palette in InDesign (CS2, version 4.0.5). I've searched through the Previous System folder that Archive and Install left, but don't know enough to recognize the software component(s) necessary to solve this problem.
View 4 Replies
View Related
Feb 7, 2014
In PSE12 I cannot drag and drop an open photo to another open photo. I can use copy & paste.
View 5 Replies
View Related
Jan 29, 2013
when i run my photoshop cs5 in administrator mode using "run as Administrator ... ", drag and drop does not work.
View 2 Replies
View Related
Sep 19, 2011
Im working with IV2012 and my autodrop feature doesn't work altough the checkbox in the content center is checked on. i can't seem to find a solution on my own.
As far as I know the feature has never worked since I went from IV2011 to IV2012. (alot of troubles in the beginning btw, most of it is gone since service pack installed)
View 3 Replies
View Related
Mar 12, 2011
I want to have a white rectangle, without a black or other border, sitting on a pale yellow ground. But so the rectangle does not look pasted onto the ground, I want a drop shadow around two of the sides. I do not want to use a plugin for this.
View 8 Replies
View Related
Dec 19, 2011
I am sure i saw that somewhere but how do i get the icons to show back instead of the bare text list of the drop down menus? In the old versions, it was easier to find my way around if i had to change version and the list might not have been in the same order, or if i was making a tutorial and someone had a PSP in a different language; i could just display the icon instead of the name for the other person to be able to identify which tool i was talking about. But in later versions, they are gone. How do i get them back?
View 3 Replies
View Related
Mar 10, 2010
I just tried to do some work in X5 and when I tried to add a drop shadow to beveled text, you can't edit the drop shadow. The shadow tool bar is grayed out except for the presets drop down. Also when I try to export an image the program add pixels to the image.
View 6 Replies
View Related
Nov 30, 2013
Now that I've upgraded to X6 64 bit, my windows 8 explorer does not show .pspimage thumbnails.
View 11 Replies
View Related
Jun 3, 2011
I just got psp x3 and i can't get my text to work all it dose is put the 1st letter in and the rest is blank or it put the 1st letter and the 2nd is blank then the 3rd one come up and the 1st letter is gone. I up new up dates in and it doing the same thing
View 3 Replies
View Related
Sep 14, 2012
I currently have X4 Ultimate installed with KPT Effects & Nik Color Effex Pro 3. I now also have X5 Ultimate installed. Now X5 came with the same Nik Color Effex but I haven't installed it yet.Does KPT Effects from X4 will work in X5? Can I copy the folder from X4 into X5? (Same question pertains to the NIk Color Effex. Useful to install it again when it's already intalled to get it working in X5.)
I thought about just trying to point X5 to the X4 plugin folder but after just trying that with something else, I'm a little leary. I tried to point X5 to the Photoshop CS6 folder where AlienSkin Eye Candy 6 installed. But right after doing that and re-starting PSP, the startup box hung. I used task manager to stop it but the program still opened anyway. I knew that wasn't right, so I removed the link to that folder and X5 opened normally again. The newest installer for Eye Candy 6 won't let me do a custom install. So, how to get the filter working in X5.
Anyway, my main question is if I can get the KPT effects from X4 working in X5 and if so what I need to do.
View 11 Replies
View Related
Apr 6, 2012
I'm just getting started with PSP. In a book I bought it saves that, after I enable the Auto-preserve function, the dialog box should come up after I click on file, then save.
The Box isn't coming up. Why is this.
Also, what's the best way to save a RAW file before I stare working on it?
View 2 Replies
View Related
Aug 31, 2011
i have a black written logo with some letters in blue and i want to change the color into green.
the problem is that at the edge of each letter the color is slightly different (light blue) to make it look smoother.
if i now take the color bucket and fill the letter up, the color changes but it gets filled with the same color until the edges and it doesn't look smooth again.
changing the antialias effekt doesn't effect anything -
to
i want to change the blue by green but with the lighter parts of the edges. simple and easy like refilling the colors.
is this possible with Paint.NET or should i consider to buy photoshop because of this lack of functionality?
View 4 Replies
View Related
Jul 25, 2011
Having trouble with topaz remask plug-in. Is there another program that works with PSP or am I out in the cold?
View 2 Replies
View Related
Oct 10, 2011
I used PSP X2 ... a few days ago I bought x4...but I dont know how the text tool is working properly..
Is it possible to change it, that it will work like that one in X2 ?
I cant move the text after I wrote something in a picture.and where is a text-input window ?
every time a open a picture and choose the text tool it is in "vector mode" but I do not want this mode.
View 8 Replies
View Related
Nov 8, 2011
I having trouble with my new PaintShop Pro X4. The smear tool is not working. I've gone thru all the blend modes and tried each one, to no avail.
View 5 Replies
View Related
Nov 20, 2013
I have never really figured out how to properly build an illustrator file in a way that it will fill properly so my only other option (that I know of) is to use Live Paint. Unfortinately Live paint also wrecks all my line weights. It also makes the object noneditable later down the road. I found this out the hard way for a logo project at college and spent over 30 hours on it just trying to fiddle with the illustrator program, looking up tutorials that never seemed to work for me and nonstop frustration.
This time Live paint doesn't work at all. (I'm trying to paint in a more complicated object than a simple logo). First off my object has gaps in it, and even when I click "Gap options" it doesn't appear to do anything and there are still gaps. So I try to fill them in myself but this wrecks my line weights. And finally Live paint appears to work but only on certain objects such as the eyes, the nose, annd the ears, yet it refuses to fill in the entire body of the animal I'm trying to colour in. I drew this animal in illustrator with the pen tool and applied line weights with the line weight tool. Yes there are numerous gaps in the image.
This is what it looks like as of now:
[URL]
Only imagine it not in a pdf but an illustrator file because yes I have the original and yes it's vector.
Also I use Adobe illustrator CS6
View 1 Replies
View Related
