Im working with IV2012 and my autodrop feature doesn't work altough the checkbox in the content center is checked on. i can't seem to find a solution on my own.
As far as I know the feature has never worked since I went from IV2011 to IV2012. (alot of troubles in the beginning btw, most of it is gone since service pack installed)
I'm a computer tech in a school that uses Inventor 2012. After cloning the computers, if I log in using a profile that was there before, I can access the content service but when a student logs in, nothing happen when trying to access it. I looked for the .exe.config files in the Inventor bin directory but could not find anything related to the computer name. The structure is different in this version.
View 2 Replies View RelatedI had to do a clean install (Archive and Install) recently on my Macintosh (450 MHz PowerPC G4, 1.25 GB SDRAM, OSX 10.4.11) and found afterwards that the drag-and-drop capabilities of Photoshop (CS2, version 9.0.2) were no longer available. In addition to this,
I'm now not able to edit original graphics in Photoshop through the links palette in InDesign (CS2, version 4.0.5). I've searched through the Previous System folder that Archive and Install left, but don't know enough to recognize the software component(s) necessary to solve this problem.
I'm running PaintShop Pro X5 15.1.0.10 on Windows 8 (64-bit). I just tried to create a drop shadow, possibly for the first time since I upgraded from X4, and it just doesn't work. I mean nothing happens.
I added a white border, as usual, and then tried to create my drop shadow. I tried it with the default settings, and I tried it with some random settings. As I said, nothing whatsoever happened.
Inner bevel and buttonize work just fine. (I haven't tried cutout.) Chisel also doesn't seem to work; in fact, it seems to come and go. It's the same with outer bevel: it isn't always available.
I'm not a novice when it comes to PaintShop Pro. I've been using it since it was shareware. I've certainly done drop shadows many times.
I'm completely baffled. Other than uninstalling and re-installing, I can't think what to do.
In PSE12 I cannot drag and drop an open photo to another open photo. I can use copy & paste.
View 5 Replies View Relatedwhen i run my photoshop cs5 in administrator mode using "run as Administrator ... ", drag and drop does not work.
View 2 Replies View RelatedWhen I paste into Photoshop CS5, the illustrator selection is too small or too big... auto Resize does'nt work. It used to work perfectly in CS4.What can i do ?
View 2 Replies View RelatedTHe auto key button doesn't seem to work in a gmask node in CFX. keyframe added even if autokey is off. bug?
View 1 Replies View RelatedI have created the Custom library of ISO bolts by adding the Material to existing ISO library using the Material Guide.
The goal is to make bolts black and anodized to be more specific with purchase orders from very beginning.
After the adding the material everything is working good except the auto drop. There is a wide Table pop ups with a lot of unnecessary info.
Is it possible to choose the columns to represent there? I mean leave just Material or Part Number ?
[URL] ........
I can not auto balloon an ipn view in a idw file? I can select the view to auto balloon but can not select any parts.
Inventor 2013
GeForce GTX 580
Windows 7 64 Bit
Is there some way we can turn off the auto highlight feature in inventor 2012? I am working in a large assembly and every time I move the cursor over the assembly it is trying to pre highlite parts and assemblys and it really causing alot of delay in my work.
View 8 Replies View RelatedWe just installed 2012 and the new 'select other' pop-up window worked for about 2 days and just quit. Is it controlled by a setting I somewhere inadvertently changed?
View 4 Replies View RelatedThe subject basically says it all. I am trying to emboss two words onto a solid model. Unfortunately it keeps failing. I am copying this model off of U-Tube models "LED LAMP"
How to use emboss feature and engrave the words "LED LAMP" On the centre of the top of my solid model part. Top View reads vertically going up the way.
save it and send it back or explain why it keeps failing.
edit part 8. Then start the Emboss process. 1/64 = Depth. Flat White colour. Following the video on youtube they use engrave from face then reverse the direction the arrow points towards the model. Then OK. That's the way I am showed it and I can't get it to engrave.
I have a student account.
1. Start new assembly
2. I save my project
3. I click in "Sput Gear" and nothing happen.
Got a rather large ipart that I haver been using in 2013. When I try to check this in, Inventor runs through the "analyzing members" thingy and fails about the 8000 member mark. Actually get a CER.
View 9 Replies View RelatedI have a problem when I want to use a cutout.
My purpose is to get a perforated plate but Inventor doesn't show this.
Only the black color is shown and not the holes.
I made an assembly, inserted a bolt and saved it to another file for thee modifications i make in the screw.
I try to make a section view with one of the origin planes, but it doesn't make
I made 2 parts, c cylinder and a plate with a hole, and tried linked the Diameter parameter in the Cylinder file.
First, i chose the Diameter, in the link dialog box, but the new user parameter that was inserted was the file name only.
Secondly, when i activate the Hole parameter in the plate file and select List Parameters in the Equation column, i see only the Hole parameter, not the new one, the Diameter, which i tried to link.
So, the link doesn't work.
But, i have, also, a general question: why do i see, in both files, in the List Parameters dialog, only the parameters which i changed their names? i expected to see all the parameters of the part, no?
We have a custom-made sheet metal punch consisting of a 5x5 matrix of 1/8" holes. We export flat patterns from Inventor as DXFs.
We normally make DXFs by creating a view of the flat pattern on a blank IDW template (no border, no title block, nothing) and export that view as a DXF. This lets us orient the view at will, unlike right-clicking on the flat pattern in the browser and selecting Save Copy As.
When the sheet metal guy assigns tooling in his software, he needs to get each punch to "lock onto" the corresponding feature in the DXF. Normally this isn't a problem, but it has been with this gang punch. The center hole of the punch needs to lock onto the correct hole in the DXF, and it can't always seem to do it. I've sat alongside the guy as he does this, and in his software the centers of the circles show up as dots/points. But on this punch, there isn't necessarily a dot in the center of every circle, and it's possible that the center hole, which really needs the dot, won't have one.
I've come up with a workaround for this: a work point in the IPT. In the attached part, it's feature Tooling1. The sheet metal guy confirms that if I include the work point in the DXF as a point (in the AutoCAD sense), he can lock onto it. However, I find that if I generate a DXF from the flat-pattern IDW, the point is lost. If I generate an ACAD DWG from the IDW and save the DWG as a DXF, the point comes through in the DXF. But that's an extra step.
Is there a way to export directly from IDW to DXF and not lose the work point? Or is this as good as it gets?
For the sake of simplicity, the attached part has no bends. I realize that if I did, I'd have to re-create the points in the flat pattern, but that's another discussion.
I created a simple Part with some parameters to drive dimensions. Saved the part. I created an Assembly. Saved the assembly. Clicked Place iLogic Component. The Place iLogic Component window appeared Selected the Part. I can see the preview window (Part-01) & the parameter window... Used default values. Hit OK NO PART INSERTED! Using Inventor Pro 2014 64-BitLudesroc
View 1 Replies View RelatedI edit Sweep1, select path with guide rail, try to select the curve in 3D sketch 2, but don't succeed.
First, it selects both, the path and the guide rail, and when it offers me to select the path alone, i don't know how to call it in english, again it gives a warning.
I have a iLogic rule for saving drawings (dwg) to a pdf file in a designated folder. Everything worked well until this Monday morning. Now I get the message: Error in rule: Save2PDF, in document: 13006-027 propflens-1.dwg Value cannot be null.
Inventor 2014 sp1 | Vault basic 2014 | HP Elitebook 8670W | win7 64b | 8Gb | GMT +1
I have a simple iLogic rule to save an IDW using SAVE COPY AS DWG. The rule was created in Inventor 2011 ilogic and was embedded in the IDW template. Trigger was set to activate when the new drawing file was saved. It no longer works and errors out in Inventor 2012. The template has been migrated to 2012 and so has the project file. The ilogic Code is given below. if some new settings in Inventor 2012 need to be changed for it to work? Or if you have an ilogic rule to do the same that works,
Get the DWG translator Add-In. Dim DWGAddIn As TranslatorAddIn DWGAddIn = ThisApplication.ApplicationAddIns.ItemById("{C24E3AC4-122E-11D5-8E91- 0010B541CD80}") 'Set a reference to the active document (the document to be published). Dim oDocument As Document oDocument = This Application. ActiveDocument Dim oContext As TranslationContext oContext = ThisApplication.TransientObjects.CreateTranslationContext oContext. Type = IOMechanismEnum.kFileBrowseIOMechanism ' Create a NameValueMap object Dim oOptions As NameValueMap oOptions.
[code]....
The Hole and thread notes command does nothing in a drawing.
I point to a thread hole, the mouse cursor changes to the right simbol but no note is generated.
I purchased an Inland rf 5 button mouse to use for the F4 rotate and F5 view return. The three programmable buttons work in LT and other programs, but not in inventor 5.3. Is there a setting I am missing? I have the latest driver for the mouse installed and as I said it works well in other software.
The mouse vendor says it's Inventor, not the mouse.
I used Inventor 2010, but after a change of our Domain, I had some issues with export and mouse customization (one worked with IV running privileged, but the other didn't and vice versa). Reinstalation didnt solve the problem, so I hoped, that a newer version would solve it. Unfortunately the problems remained the same, but I could get it to work (running mouse software also privileged).
Now I noticed, that the 'select other' menu doesn't pop up, regardless of the delay choosen in the settings. Also some function keys don't work: F7, F8, and F9 don't show any reaction, while all other F-keys work.I'm using Inventor Professional 2013, 64 Bit (Build : 200, Release 2013 SP2 Update 2) from our Education Master Suite.
I cant't save copy as PDF when I point to a nework location, It's working when I save directly on my computer.
I get a message saying : "Failed to publish DWF file."
There are two cases, that should behave the same, but they don't.
First program works normally. Inventor generates a circular Pattern with the given Part.
' Part referenced in Obejct-Collection-Object
o_ObjectCollection (is defined)
' reference an Axis of the Assembly
[Code].....
Now, the second case, I try to take the Work Axis from a Part, that is placed in the Assembly,
but Inventor does not generate the Pattern. If I set the Axis visible, or even rename it, it works. But the AddCircularPattern does not work.
' Part referenced in Obejct-Collection-Object
o_ObjectCollection (is defined)
' reference an Axis from Part, placed in Assembly
[code]....
I've attached an example of a workflow we use to make different instances of products.part1 gets assembled in assembly1 which then gets derived in part2 to receive a bend.We use assembly1 in one place and part2 in another.(this is a simplified example, made with IV2013 SP1.1)
In part1, if you add the thread feature, the "bend part" feature in part2 fails after updating.This also happens if you try to add a "bend part" to part1 AFTER the thread feature, if the bend is present beforehand it does work.
Having the bend before the thread feature in part1 doesn't work with our workflow, because we need the assembly1 to be straight.In short, the thread feature is causing problems with "bend part".
I can't say if this problem was present in previous versions or even in the previous service pack since we don't use this workflow that often, especially with threaded parts, but i hope this can get fixed with a hotfix.
Using IV2014 Pro SP1 update 1, Win7-64bit
I need a macro to auto label, with DIMLINEAR, the lines for Rafters with the lenghts. I have the Dimension Styles set up for each roof pitch, but need a macro to auto label the line instead of clicking each line individually. Also, I can't find a ROUNDUP feature in the Dimension Styles. I've got it to round to the nearest 2' but it won't go up....if it's 11' it goes to 10'...I need it to go to 12'.
View 5 Replies View RelatedCan you reverse the direction of an auto feature line generated from a corridor in C3D 2012?
View 4 Replies View Related