Paint Shop Pro :: Editing Two Images On Same Screen?
Dec 3, 2012
I'm a longtime user of PSP 8 and just downloaded the trial version of PSP X5, thinking to buy it. With PSP 8, if I wanted to edit two images on the screen at the same time, I loaded them both into the program and then used the minimize button at the upper right hand of each image to switch them out of full-screen mode and put them next to each other. PSP X5 no longer has the minimize buttons attached to the images. I can tab back and forth from one image to the other, but I can't figure out how to put them both on the screen simultaneously. Is this feature still present somewhere in PSP X5? How do I access it?
View 2 Replies
ADVERTISEMENT
Nov 30, 2011
I'm still using PSP X3. What format more knowledgeable people for me use for editing images.
In the past, I'd take the jpeg produced by my camera, convert it to PSP format, and then when finally finished, save it as jpeg again.
I understand that the PSP format is no longer used, so should I just work in jpeg format? My understanding is that any intermediate saving would compromise image quality; if not jpeg, then what?
View 5 Replies
View Related
Oct 16, 2013
I am using Version X6. Is there a way to show white/black clipping on images while I am Adjusting or Editing them?
View 2 Replies
View Related
Oct 20, 2012
After screen capturing an image, when viewed in the PSPro X workspace, a thin white border shows on the right side and at the bottom.This shows what ever is captured, it wont clone brush or crop out.I have to apply a border to disguise it.
View 14 Replies
View Related
May 21, 2012
When I open up the image that I want 2 use 4 my background the image fills the (working) window. Then, as instructed, I go in2 "Layer" & import the pic w/the green screen background. But when I then go 2 "Effects" & choose/use ChromaKey (again, as instructed) the background pic is now only a small square in the upper left hand corner of the window & the rest of it is white. Therefore, my pic/finished result has a background w/a little square in the upper left hand corner & the rest is white?
View 3 Replies
View Related
Jul 3, 2012
I am working on a photo of a city skyline that I took. I am looking to superimpose blue sky and clouds which normally isn't a problem if there were only buildings. The white spaces in between tree leaves such as palm trees are especially challenging to fill. They can be hundreds of distracting white spots in the scene to fill .
View 2 Replies
View Related
Mar 11, 2012
I am running Windows7 64 bit and although I am fairly OK with most things in X3, there is one very simple thing that is baffling me! How do I edit existing text?
For example:
I create a plain white background.
Click on the "Text" button and add some text.
Click the green "Apply changes" and then do something else e.g add some graphics etc.
How can I then edit the text that was created (Correct a spelling mistake, change font size colour etc).
View 2 Replies
View Related
Aug 20, 2011
I'm trying to edit a published script I know that height and width are the properties for height and width (makes sense)
I need to know the property for pixels per inch OR any script that sets the value --- so that I can batch
View 4 Replies
View Related
Dec 5, 2013
Sometimes after editing jpeg files in PaintShop Pro X5, attempting to save them raises an error and they can only be saved to a different file name. After closing out of PSP, the original file cannot be deleted in Windows Explorer. Shift-Delete removes the file from the list momentarily, but a refresh brings it back. Normal delete (to Recycle Bin) raises an error that admin authority is required, but clicking to proceed fails. Starting Windows Explorer as administrator does not resolve the problem. Process Explorer doesn't show PSP or any component of it that I recognize still running (and perhaps having exclusive control of the file). After a reboot, the file can be deleted. I have observed this problem on both machines where the software is loaded and registered. Both machines are malware-free. Both are running Windows 7 x64 Home Premium. Could very well be a Windows problem, but I don't have a similar problem with files that are created or modified with any other application.
View 6 Replies
View Related
Aug 1, 2013
I have several thousand photos and I need to edit the names with some system that uses my time efficiently. In the past I used windows explorer, which allowed me to modify groups of titles but now I just updated to windows 7 and it does not seem to allow that. Is there some way with Paint Shop Pro to modify the names of groups of photos - extract certain characters or words, add other characters or words, etc?
Or perhaps there is a photo organizing program that provides that kind of tool?
View 2 Replies
View Related
Feb 1, 2012
I scanned some old pictures at 600 dpi. Using a Canon CanoScan LiDE 700F and PSPPX3 Ultimate.
I had to take the bmp images out of the temp folder last night since I need to shut my computer down. The bmp files were the scans, but not exported yet. They open in image viewing programs, but they are not cropped or anything.
I wanted to export them as tif and jpeg files. Then I'd edit some. I was wondering if this weird dpi number they now have at 599 instead of 600 will be a problem. Could an image viewer, editor or editing, etc maybe have issues? Or dpi being moved, rotated, effects applied, etc would be a problem? What about using it in a program like CorelDraw, would that have issues?
View 2 Replies
View Related
Jul 18, 2011
Since installing X3 I edit an image ... save and then try to open another image and the program freezes ... everytime. I have to end the process and restart the application. Never had this problem with Paint Shop Pro previous versions. I'm very close to uninstalling and asking for a refund. The install and patches ran fine. Running on XP SP3 ... 3+GHz machine with 4 MB RAM ... Dual Core.
There is no error message. I can see the progam in task manager using 25% CPU with memory usage climbing. I've waiting several minutes and the program does not return.
View 4 Replies
View Related
Dec 6, 2012
Another question as I consider upgrading from Jasc PSP 8 to Corel PSP X5. PSP 8 includes a feature, Animation Shop, which is real useful for editing animated GIF files. Does PSP X5 have this capability?
View 5 Replies
View Related
Aug 25, 2013
when I close PSP X5 I get this blank white nag screen telling me I can get some free tips for being a better photographer and then in the middle there's a checkbox to tell it that I don't want it to appear no more so I tick it then click "close" nothing happens and clicking the red X doesn't do anything and I've checked process explorer and its linked to Corel PSP X5 for sure and to close it I have to kill the process every time.
Is this addressed in SP2 for X5? Or do I need to reinstall?
View 2 Replies
View Related
Aug 2, 2010
Using PSP X3 on an Win7 Home Premium system with an ATI HD 5700 Series card.My Version is 13.2.0.35 and video card driver/software was updated 2 days ago.
I do a lot of screen captures but I have not been able to get X3 to include the Cursor in the capture!!I have tried it in Full Screen, Client area, and Window but it never shows up.I have even un-checked it (Include Cursor) and re-checked it to make sure it was set
View 10 Replies
View Related
Nov 28, 2012
Under the direction of the tech support i have reset my Corel Paintshop Prox5 back to factory settings, and now my Windows screen tab for lack of a better word, where you can move the windows screen around with your mouse, the part that has the Minimize,Maximize,Close, at the top, is now off, is there a way to get it back on ?Without it i cant have two screens side by side. One covers the other one up. When reloading i some how turned it off ?
View 2 Replies
View Related
Aug 26, 2011
I'm working with PSP XI version on Windows XP machine.
I have been successfully editing many jpegs without issue, reviewing in slide show "Quick review" and doing one step correction "Quick Fix" in some cases. But now in one batch of photos whilst editing one picture an error message occurred (did not note it down) once during slide show preview; application locked; and having restarted PC / application this one file cannot be edited. Error message does not recur, Organiser tray simply shows grey box for this file.
When selecting this image in Organiser tray whole application still locks. Working with other images is fine.
Windows Explorer says that this one jpeg file is corrupt and copying and renaming does not fix.
Other preview software cannot recognise the jpeg either.
View 9 Replies
View Related
Feb 11, 2013
Just lost an important photo.When I open X5, I select a photo. I click on one of the "Instant effects" The photo changes to whatever I selected. The problem. if I don't like it, that's tuf as the go back button does nothing 9 times out of 10 ("revert current editing") so, to get the original back I close X5 expecting to get the message "Save changes to xxxxx. No it seems it has saved it to whatever effect I chose.... no turning back it seems.
View 4 Replies
View Related
Dec 1, 2011
I have been using Paint Shop Pro for around fifteen years now and have always been very happy with each new version. I tended to upgrade every other version and have been using X2 for the last couple of years. With the recent announcement of Corel's service pack to fix some of the problems of X4, I decided to upgrade.
I uninstalled X2 and rebooted ready to install my shiny new copy of X4. All went well until I tried to start it up. The splash screen appears and starts to load up the components but every time it gets to "Initializing Palletes" it crashes and I get the "Paint Shop Pro has stopped working" and the options to close or go online and check for a solution!
I've tried uninstalling it, repairing the install, and also uninstalling it using the RevoUnInstaller as recommended by df but it didn't work. I also tried installing SP1 to see if it worked but didn't.
I can't even get this thing to start up at the moment. I need it for a few projects I'm working on and am beginning to wish I had left well alone!
I'm also dreading trying to re-install X2 as I can see that having problems if X4 has screwed up any deep-seated settings.
View 3 Replies
View Related
May 20, 2010
I've used PSP for many years and used the screen capture many a time. But I can't get it working fully on Windows 7 x64. I usually have it configured to use F10 to start the capture of an area. It was working a bit (but never with IE8) about 30 minutes ago but just isn't working at all now.
View 4 Replies
View Related
Jul 10, 2012
Is it possible to have more than one picture (preferably 2 or 4 and maximum 6) on a full screen at the same time. So that choosing which picture you want to keep is made easier. Now I increase zoom of thumbnails but this leaves a lot of unused space around them including the different tool bars.
View 2 Replies
View Related
Jun 24, 2012
I downloaded and installed Service Pack 2 for X4 some time ago. It created havoc with my highly customized workspace and I reverted to the System Restore point set before installing SP2. So, no SP2 on my system.
Corel Guide>Settings>Messages, both messages UN-ticked.
Clicked on Check for updates using the Corel Guide and also under Help>Check for updates, to see what happens.
Nothing happens, they just stop running I then close X4 and (quite a while later, usually when doing something else) a screen appears "An important update is available for PSPX4 Download update now!
View 4 Replies
View Related
Jun 28, 2011
When I open up an editing box. ie Local Tone Mapping, Adjust Brightness/contrast etc etc, the box that opens up is only partially on screen, you cant drag it into a different position because the top part where you click to drag is off screen, even if I semi minimise the window it is still off screen. Is there a way when these are opened to dock them to one side or to a permanent position. Windows 7 64bit - PSPP X3
View 2 Replies
View Related
Sep 8, 2012
I've been a PSP user since PSP 7.
I've got a question about x4. When I do multiple screen captures and then I click on the minimized x4 icon, it doesn't just open back to the workspace like it used to in psp 7. It always opens this pop up of all the captured files I took and I have to select one in order to re-open the minimized x4. It's so irritating because I go back n forth a lot taking screen caps but it always has to force me to choose a file.
If there is a setting to skip it and just re-open x4 to workspace when I click on the minimized icon after taking multiple screen caps?
View 5 Replies
View Related
Jan 29, 2012
Image with resolution larger than monitor size, view in PSP set to 1:1...Ctrl+Shft+A for full screen view.
PSP switches to full-screen with move (hand) tool present for moving around the image. However, when the move tool is used it behaves like the Esc key and defaults back to preview view within PSP.
View 1 Replies
View Related
Feb 9, 2013
I am not sure how this happened, but using PSPX3, when i need a new layer, the dialogue window is way to the top. The values and all are accessible but when i am doing live presentations or recording tutorials, this is an annoyance. It is so high that i cannot grab the top of the window and pull it down. It is only for that one dialogue window and only for that one PSP version.
I tried resetting the workspace to default, i tried reloading an old workspace, but that one stubborn dialogue window is still there on top.
I tried changing the screen resolution temporarily to see if i could "grab it" to move it back down, but it still is "ungrabbable".
View 9 Replies
View Related
Apr 24, 2013
Version 1.5.0.12 (the SP2 patch was installed). But I'm unable to figure out how to setup screen capture because that option is grayed out. I'm unable to complete Step 1 due to the latter issue. That is: File | Import | Screen Capture | Setup; I can never reach the fourth selection.
View 3 Replies
View Related
Jan 10, 2012
I just haven't found the setting, but I can't seem to make the cursor disappear during full screen preview in PSP x4! Is it something I'm not selecting?
I have searched to the ends of the internet for an answer, but have come up with nothing, however I noticed that there was an ESC key bug with full screen preview in PSP x3, and having a visible cursor would allow one to exit full screen without having to press a key. Could this be why the cursor is now visible? Now that I think about it, I've always been able to exit with either the ESC key or a mouse click. Still, this is something I've never seen before in any version of PSP.
View 2 Replies
View Related
Oct 15, 2012
I can't find any preferences for changing the photo editing area background colour. I am not sure what it is called but what I am talking about is the space in the middle of the program where photos open up into (not the workspace option which changes the menu bar colours of which I am using the blue option.) At the moment the centre area is a charcoal colour. When I am editing a photo which is smaller than this space it is surrounded by this colour and it makes it hard for me to see the thin black border which I place around some photos. Can I change the colour of the editing area to white?
View 3 Replies
View Related
Oct 4, 2011
Screen capture doesnt work in psp x4. I tried searching for this but no info at all on it. I have to resort to using the print screen option in windows and then paste as new image.
View 9 Replies
View Related
Dec 3, 2013
I have been doing some very simple editing of photo's taking a copy from part of one and pasting it as a new layer on another photo. I can then manipulate the size, placement and orientation easily with my X4 version of PSP.
I just purchased the new x6 and am ASTONISHED that this simple exercise doesn't work at all in the 64 bit version and only partially in the 32bit version of x6. What happens is that the screen isn't redrawing the changes as you move the pasted part around. It can be refreshed manually but gets into such a mess when you are trying to place the image that it's unusable. I go back to X4 and using exact same photo's I can work without any problem.
I'm on win7 ultimate all upto date and an 8800 GTS graphics card with latest drivers. There should be no reason x4 works and x6 does not.
View 4 Replies
View Related
