The tethered capture doesn't seem to be working in lightroom 4.1 RC with the canon 5D mk3. The camera is detected with the correct name, but no camera parameter is recognized, and the camera can't take any photo.
I've experienced this both on Windows 7 64bits and Mac OS X. Importing canon 5D mk3 pictures works fine.
i found a tether issue on Lightroom 4.4 on Windows 8 (x64 and x32) (PC and Laptop)
i have two cameras - Canon 550D and 5D mark II and both didn't work with tethered capture
when i start on tethered capture - there is a No camera detected
try this cameras on another Laptop with LR 4.4 but Windows 7 x32 - all work correct, both cameras work and detected
I downloaded and installed LR 4.3 update to my Mac running OS X 10.8.2. I have no problem importing the RAWs from my Canon 6D by plugging in the SD card into the SD card slot in my MacBook Pro.However it appears that when I try to start tethered capture in LR, my camera keeps saying that it's "BUSY" and won't work at all.I was just wondering does this mean that tethered capture for Canon 6D is not supported in LR 4.3?
View 1 Replies View RelatedIt looks as though LR4 won't recognize the new Canon 1D x for tethered shooting.
View 8 Replies View RelatedI was successfully shooting tethered using Lightroom 4.3 (PC laptop with Windows 7) and my Canon 5D Mark III, however when I disconnected the cable I was no longer able to see anything on the back of the camera, no image playback, no menu, no live view, nothing. How do I recover the functionality of the camera's back screen. I tried removing the battery for a while, replacing the battery, taking out the memory card. Don't know how to "reset" the camera. Note the top display on the camera and the view finder display work fine, I can change settings with my dials. Was working in Manual Exposure mode, and also tried Aperture Priority. If I reconnect to the laptop I can still work in tethered mode, but after disconnecting the camera back is still dead.
Was I somehow supposed to disconnect the camera from tethered capture before disconnecting the cable?
Open Tethered Capture. Shoot and image from camera. White Screen. Nothing. Push button on toolbar. Nothing.Does Tethered capture work with Mark III?
View 4 Replies View RelatedI'm having an issue using LR4 where when shooting in tethered capture mode the previewed image wont advance to the photo you have just taken.The file is there, but you have to manually advance to it.
View 1 Replies View RelatedMy copy of LR4.4 does not recognise my camera Nikon D2x when I select "Tethered Capture"
View 8 Replies View RelatedIf not supported for LR3, would it be available for LR4?Right now, I am using Aperture for all of my tethered capture, then importing to LR3.
View 4 Replies View RelatedTethered capture function on my Nikon D600 doesn't work (camera not detected) while the import function works. I use aLightroom 4.3 64 bits on Windows 7
View 2 Replies View RelatedProblem: Connects and works once in 30 or 40 tries. Sometimes shows the camera connection and sometimes it will not. Have changed cables, wiggled cables, used different USB ports, and anything else I could think of to do. When it works, the Tethered Capture window does show all the pertinent info and the shutter release button works. Most of the time, it will at least recognize the camera, but none of the settings and will not download to the computer/Lightroom (as seen below). The camera will shoot and record the image to the internal card... just not to the computer/Lightroom.
I have since run maintenance programs, rebooted, changed to 32 bit, etc......
Equipment: Mac 2.2GHz Intel Core 2 Duo with Mac OS X 10/7.2 using Lightroom 3 (with all updates including Camera Raw), 4 gigs ram, 500 gig hard drive,with 200 gigs open.
I need to shoot in tethered capture mode and have found that my D90 in not fully supported in this mode. A D7000 is fully supported, but will cost somewhat more than I had hoped to spend. The new D3200 would be an excellent match for our needs (dental photography). My question: Do this camera is supported in tethered capture and if not, does Adobe plan on adding it as a compatible camera anytime soon?
View 1 Replies View RelatedI'd like to know if it's possible to have a live preview when doing tethered capture in Lightroom 4.3. This seems to be a basic function. Why look at the computer screen and use Lightroom to capture the photo but still use the camera's viewfinder. You are forced to go back and forth from the camera's viewfinder to the computer screen.
Is there any way to do this in Lightroom?
I'm trying to set up tethered shooting with my D800. Following the steps to initiate tethered capture per Adobe, the camera is recognized, the camera settings are updated in LR when changed at the camera, and the LR shutter release functions properly. Only the files never transfer to LR. LR indicates that the "Files are Transferring from Camera" but they never do. Here's some additional information.
Macbook Pro v 10.8.5
Lightroom 5.3 up to date.
D800 firmware up to date.
I've gone through all the steps on the Adobe troubleshooting page. I've tried this with a CF card installed and no card installed. This setup works perfectly with Image Capture on the Mac.
I use LR3 extensively for tethered capture and think that Adobe did a great job for the first release of this feature but one critical option is missing.
I use tethered capture with the 'shot name' option selected which is great becasue it puts the different shots into their own folder in the catalog but it would be even more useful if there was a way to have the shot name included in the filename that is saved. I have played around with the custom filename options, which are extensive, but the shot name option isnt available. Is there a way to do this?
I am trying to make a tethered capture from my Nikon D3200, this camera shows up as supported from version 4.2. I am using an evaluation version of Lightroom 5. The menu shows: "no camera detected" .Am I overlooking something?
View 2 Replies View RelatedWhen tethered capture support for the Nikon D800 & D4 will be added to LR 4?
View 2 Replies View RelatedI keep losing all of my keyboard functions when using tethered capture in Lightroom 4. Only a computer reboot gets the keyboard back.
View 2 Replies View RelatedI have a Canon Rebel T4i, Lightroom 4.2 running on Mac OS 10.8.1. When I connect the camera to the computre and select Tethered Capture, I see the camera name in the tethered capture window, but the values for the settings are "--". When I mouse over the shutter button, the curson becomes a gloved hand with pointed finger and if I click on the shutter button it changes shade, but does not fire. When I look in the view finder, "Busy" flashes and I can't use the camera shutter.
View 4 Replies View RelatedI am trying to practice shooting tethered for an upcoming shoot. I am unable to get Lightroom and my Canon 70D to connect. I receive the dialog box shown below several seconds after attempting to connect. I went through all the steps on the "Troubleshooting tethered capture in Lightroom" and can shoot tethered using Canon's software. I am using Lightroom 5.3 on a MacBookPro 13 inch with 16 gb ram running system 10.9.1
View 1 Replies View RelatedI just installed Light room 5 and try to use the tether funtion from Light room 5. But it shows "No Camera Detected" I checked the USB cable and it is connected correctly. Is there any solutions to fix that? Or Lr 5 does not suport Nikon D3000?
View 2 Replies View RelatedI have shot tethered through various versions of Lightroom with various cameras with mixed results. With each new version of LR, it seems that shooting tethered becomes more prone to crashes and in LR 5, I have found that the transfer of images is so slow as to be unusable. I recently had a shoot where I used LR 5 for the first time. The transfer of images was so slow that, after trying disk doctor to repair the disk and restarting the computer several times, I finally switched back to LR 4 and found that the transfer, while still prone to its odd temperaments, was much much faster than LR 5.
While LR 4 seems to be much better than LR 5 for shooting tethered, it is still so temperamental. If the camera sits for more than a few minutes without activity, LR no longer accepts images from the camera. I then have to shut down LR and restart it, making sure to have the camera off until LR is relaunched and tethering is turned on once again. If I do it in the wrong order, it doesn't work. During a shoot, it is maddening to have to constantly restart LR 4.
Looking for making LR 4 less temperamental and LR 5 functional when tethering?
I have a Canon S100 and just started importing photos and video into my LR 4.3 catalog. I convert RAW to DNG, and the Capture Time on the photos in LR is correct. However, the video Capture Time is shifted forward exactly 8 hours. I know how to correct the video Capture Time, but is there anything I can do to stop this from happening in the first place? I looked at what the metadata looks like in Bridge.
PHOTO:
Date Created = Correct Capture Time
Date File Modified = The time I imported the file into LR.
VIDEO:
Date Created = Capture Time + 8 hours
Date File Modified = Correct Capture Time
problem of the screen capture/grab not working and has anyone solved this problem or know why it happens?
View 10 Replies View RelatedScreen capture doesnt work in psp x4. I tried searching for this but no info at all on it. I have to resort to using the print screen option in windows and then paste as new image.
View 9 Replies View RelatedI have a Nikon D4 with a WT-5 wireless transmiter and lightroom 3.6. When I follow the steps to make it work, lightroom cannot detect the camera, but the camera does seem to recognize lightroom.
View 4 Replies View RelatedI'm just trying out LR5. I've watched vidoes where in LR4 you can setup a slideshow to play from a folder, and while the slideshow is playing you can take new photos from a tethered camera and it will automatically add it to the slideshow.
In LR5, on my computer (Mac), the incoming photo seems to get stuck and does not make it into the slideshow. I have to stop the slideshow, and restart it to see the new incoming photo taken by tethered camera. I need this function for an event, so I'm just wondering whether I'm doing something wrong, or whether it is a bug in LR5?
I've selected the mode "Use: All Filmstrip Photos". What I've observed is that while playing the slideshow without going fuill screen, a newly taken photo from the tethered camera appears as a white tile, but then the thumbnail contents do not change. When I stop the slideshow, the photo then gets "Developed" and then it will be in the slideshow the next time I play it.
System: OSX 10.6.8, mac pro, 8 core, 8 GB ram, multiple 1 TB drives, 6 monitors.
So I found the ad on Adobe that said that the 6D was supported in Lightroom 4.3, and the Lightroom page said that it would work on OSX 10.6.8. So I bought it.
Upon installing it, I find that it cannot see (does not show) 6D RAW files when IMPORT is pressed. It shows JPEGS if I have them in the camera, and it knows the camera is there in the import dialog -- shows its name -- but no RAW files.
I checked for updates to Lightroom 4.3, it says there are none, I'm "up to date."
DPP sees the RAW files fine and imports them. So the USB connection, etc., is working.
I'm sure I'm missing something, and I really need RAW files, not JPEGs.
Lightroom 5 doesn't any longer show GPS info from canon 6D in imported rawfiles. This regards MacOS-version. It works in iPhoto and in Lightroom 5 for Windows 8!
View 1 Replies View RelatedJust wondering why LR 4 doesn't recognize my new Canon 500 mm f4 MK II lens?
View 8 Replies View RelatedI'm running LR 4.1 64bit. I've checked for updates on both that and 64bit CS5. When importing from the camera, LR doesn't copy the CR2 files.
View 4 Replies View Related