I'm having an issue using LR4 where when shooting in tethered capture mode the previewed image wont advance to the photo you have just taken.The file is there, but you have to manually advance to it.
View 1 RepliesThe tethered capture doesn't seem to be working in lightroom 4.1 RC with the canon 5D mk3. The camera is detected with the correct name, but no camera parameter is recognized, and the camera can't take any photo.
I've experienced this both on Windows 7 64bits and Mac OS X. Importing canon 5D mk3 pictures works fine.
I'm using GIMP 2.6.11 on Windows XP. I use "ALT + PRINT" to capture the active program's screen and "Edit -> Paste as -> New Image" to create a new image from the captured screen.
The problem is that the new image always shows extra lines (about 3-pixel wide) on the left side and clips the right side. I haven't verified it pixel-by-pixel, but it looks like what's clipped on the right side is displayed on the left side.
But the problem doesn't happen when I do "File -> Create -> Screen Shot -> Grab a single window"; it shows up nicely.
Also even when I use "ALT + PRINT" to capture, the problem doesn't happen when I paste it to a different program, such as Windows Paint or even WordPad; it happens only when I do "Paste as New Image" in GIMP.
My copy of LR4.4 does not recognise my camera Nikon D2x when I select "Tethered Capture"
View 8 Replies View RelatedIf not supported for LR3, would it be available for LR4?Right now, I am using Aperture for all of my tethered capture, then importing to LR3.
View 4 Replies View RelatedTethered capture function on my Nikon D600 doesn't work (camera not detected) while the import function works. I use aLightroom 4.3 64 bits on Windows 7
View 2 Replies View RelatedI downloaded and installed LR 4.3 update to my Mac running OS X 10.8.2. I have no problem importing the RAWs from my Canon 6D by plugging in the SD card into the SD card slot in my MacBook Pro.However it appears that when I try to start tethered capture in LR, my camera keeps saying that it's "BUSY" and won't work at all.I was just wondering does this mean that tethered capture for Canon 6D is not supported in LR 4.3?
View 1 Replies View RelatedOpen Tethered Capture. Shoot and image from camera. White Screen. Nothing. Push button on toolbar. Nothing.Does Tethered capture work with Mark III?
View 4 Replies View RelatedI need to shoot in tethered capture mode and have found that my D90 in not fully supported in this mode. A D7000 is fully supported, but will cost somewhat more than I had hoped to spend. The new D3200 would be an excellent match for our needs (dental photography). My question: Do this camera is supported in tethered capture and if not, does Adobe plan on adding it as a compatible camera anytime soon?
View 1 Replies View RelatedIt looks as though LR4 won't recognize the new Canon 1D x for tethered shooting.
View 8 Replies View RelatedI'd like to know if it's possible to have a live preview when doing tethered capture in Lightroom 4.3. This seems to be a basic function. Why look at the computer screen and use Lightroom to capture the photo but still use the camera's viewfinder. You are forced to go back and forth from the camera's viewfinder to the computer screen.
Is there any way to do this in Lightroom?
I'm trying to set up tethered shooting with my D800. Following the steps to initiate tethered capture per Adobe, the camera is recognized, the camera settings are updated in LR when changed at the camera, and the LR shutter release functions properly. Only the files never transfer to LR. LR indicates that the "Files are Transferring from Camera" but they never do. Here's some additional information.
Macbook Pro v 10.8.5
Lightroom 5.3 up to date.
D800 firmware up to date.
I've gone through all the steps on the Adobe troubleshooting page. I've tried this with a CF card installed and no card installed. This setup works perfectly with Image Capture on the Mac.
I use LR3 extensively for tethered capture and think that Adobe did a great job for the first release of this feature but one critical option is missing.
I use tethered capture with the 'shot name' option selected which is great becasue it puts the different shots into their own folder in the catalog but it would be even more useful if there was a way to have the shot name included in the filename that is saved. I have played around with the custom filename options, which are extensive, but the shot name option isnt available. Is there a way to do this?
I am trying to make a tethered capture from my Nikon D3200, this camera shows up as supported from version 4.2. I am using an evaluation version of Lightroom 5. The menu shows: "no camera detected" .Am I overlooking something?
View 2 Replies View RelatedWhen tethered capture support for the Nikon D800 & D4 will be added to LR 4?
View 2 Replies View RelatedI keep losing all of my keyboard functions when using tethered capture in Lightroom 4. Only a computer reboot gets the keyboard back.
View 2 Replies View RelatedI have a Canon Rebel T4i, Lightroom 4.2 running on Mac OS 10.8.1. When I connect the camera to the computre and select Tethered Capture, I see the camera name in the tethered capture window, but the values for the settings are "--". When I mouse over the shutter button, the curson becomes a gloved hand with pointed finger and if I click on the shutter button it changes shade, but does not fire. When I look in the view finder, "Busy" flashes and I can't use the camera shutter.
View 4 Replies View RelatedI just installed Light room 5 and try to use the tether funtion from Light room 5. But it shows "No Camera Detected" I checked the USB cable and it is connected correctly. Is there any solutions to fix that? Or Lr 5 does not suport Nikon D3000?
View 2 Replies View RelatedI was successfully shooting tethered using Lightroom 4.3 (PC laptop with Windows 7) and my Canon 5D Mark III, however when I disconnected the cable I was no longer able to see anything on the back of the camera, no image playback, no menu, no live view, nothing. How do I recover the functionality of the camera's back screen. I tried removing the battery for a while, replacing the battery, taking out the memory card. Don't know how to "reset" the camera. Note the top display on the camera and the view finder display work fine, I can change settings with my dials. Was working in Manual Exposure mode, and also tried Aperture Priority. If I reconnect to the laptop I can still work in tethered mode, but after disconnecting the camera back is still dead.
Was I somehow supposed to disconnect the camera from tethered capture before disconnecting the cable?
i found a tether issue on Lightroom 4.4 on Windows 8 (x64 and x32) (PC and Laptop)
i have two cameras - Canon 550D and 5D mark II and both didn't work with tethered capture
when i start on tethered capture - there is a No camera detected
try this cameras on another Laptop with LR 4.4 but Windows 7 x32 - all work correct, both cameras work and detected
Why does Lightroom not "see" the photos from my catalog since the latest update? Ever since the latest update it says file not found but I can open and work on the photos in other programs. How do I get the prgoram to "see" my photos again?
View 7 Replies View RelatedI have my photos on a separate volume at /Volume/Users/Lightroom Photos/…
Everything works fine except when I choose "Edit in Photoshop CS6", work on the image in Photoshop then save it. It gets saved back to the same folder as the original file, but when I tab back to Lightroom it just shows a square tile with a question mark instead of the new file. Tapping on the exclamation mark reveals that Lightroom thinks the new file is supposed to be in /Users/Lightroom Photos/…
For example the dialog box might say:
“_DSC3047-Edit.tif” could not be used because the original file could not be found. Would you like to locate it?
Previous location: /Users/Lightroom Photos/2012/2012-12-08/_DSC3047-Edit.tif
When in reality the original and the edit are both in /Volumes/Users/Lightroom Photos/2012/2012-12-08/ and there is not, and never was a /Users/Lightroom Photos/…
That is, something about saving back from Photoshop stripped off the "/Volumes/" from the beginning of the path. I can choose Locate and find it right where it should be and it will show up. Once it shows up the image tile shows the image but has an exclamation mark; tapping on that brings up a dialog box that says:
The metadata for this photo has been changed by both Lightroom and another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
This is on a Mac and so /Users does exist but that maps to /Volumes/Macintosh HD/Users. I wonder if either LR or PS is confused by there being a /Users and a /Volumes/Users.
Editing in a Nik Plugin (e.g. Silver Efx) works properly, FWIW.
I am using LR4.2 and PS CS6 13.0.1 on OS X 10.8.2.
I'm just trying out LR5. I've watched vidoes where in LR4 you can setup a slideshow to play from a folder, and while the slideshow is playing you can take new photos from a tethered camera and it will automatically add it to the slideshow.
In LR5, on my computer (Mac), the incoming photo seems to get stuck and does not make it into the slideshow. I have to stop the slideshow, and restart it to see the new incoming photo taken by tethered camera. I need this function for an event, so I'm just wondering whether I'm doing something wrong, or whether it is a bug in LR5?
I've selected the mode "Use: All Filmstrip Photos". What I've observed is that while playing the slideshow without going fuill screen, a newly taken photo from the tethered camera appears as a white tile, but then the thumbnail contents do not change. When I stop the slideshow, the photo then gets "Developed" and then it will be in the slideshow the next time I play it.
I have this image in PS with several layers. I have put the last layers into the image from Illustrator, and I want to copy the image back into Illustrator, so I can print 6 on a page, but when I do, all the lastest layers don't show up. What do I need to do, to get all the layers?
View 5 Replies View RelatedI love tethered Shooting but as default (at least for Nikon) Lightroom does only save the file on the computer, not on the memory card.
Now I want to have a backup of the image file on the memory card additionally to downloading it. The tethering software digiCamControl can do this with my camera, so it is technically possible.
So how can I achieve this using Lightroom tethering?
When I try this, PSE 11 opens but the image doesn't show up. When I go back to Aperture, I find a .psd version of the file I attempted to edit in PSE11.
View 1 Replies View RelatedIllustrator CC latest version doesn't work. I can't open my ai files, I can't make new documents.
View 6 Replies View RelatedI'm running CS6 on Windows7, Intel HD Graphics P4000 with driver updated. I have used the oil paint filter successfully in the past. Now when I try to use it, the filter window comes up, and it notes that the image I want to work on is at 25% size, but it remains blank -- the image itself never shows.
View 2 Replies View RelatedWhen I save a Corel X5 file the thumbnail doesn't show an image like it did when I saved a corel file in X3. It shows the green pencil symbol .....is this normal?
View 8 Replies View RelatedI just installed Photoshop through Creative Cloud and my Liquify filter screen is totally black and doesn't show the image. You would think the default setting would be to show the image or layer,
View 3 Replies View RelatedI have used Lightroom since version 1.0 and at the moment I am using v3.3.
Now I have following problem and I can't find a solution for it: In the Navigator I have synchronized my complete folder where I store all of my photos. This folder contains more than 50000 photos already in many subfolders. But now I found some subfolders not showing all their content. I can see in the Navigator e.g. 216 pictures beside the folder name but in the preview I can see only 3 pictures! And I found some more folders which doesn't show their full content.
I tried to sychronize the single folder again but Lightroom says there were no new pictures and also no missing pictures to remove from the folder. If I open the folder by the Windows Explorer then I can see that all the files for the 216 pictures are there! So there must be a problem with the lightroom database!
But now I don't know what to do to get the pictures displayed in the library again.